ERSATZTEIL-FINDER

Yokomo

Ordnen nach:
Empfohlen
24
M2.5x14mm FH Socket Screw
YOK-ZC-F2514
CHF3.90
Auf Lager  
+ −
5x8x0.8 Steel Spacer (8pcs)
YOK-ZC-S580
CHF2.50
Nicht auf Lager
Graphite Upper Deck SD3.0
YOK-SD-003S3
CHF34.90
Auf Lager  
+ −
Aluminum Upper Deck Post SD3.0
YOK-SD-303S3
CHF12.90
Auf Lager  
+ −
Aluminum Steering Bell Crank Base
YOK-SD-202BS3
CHF15.90
Auf Lager  
+ −
Aluminum Center Link SD3.0
YOK-SD-202CS3
CHF25.90
Auf Lager  
+ −
Graphite Main Chassis 2.2mm für MS-FWD
YOK-MS-002F
CHF99.90
Nicht auf Lager
Graphite Upper Deck 2.0mm für MS-FWD
YOK-MS-003FF
CHF24.90
Nicht auf Lager
Main Chassis RO2.0
YOK-RO-002
CHF36.90
Nicht auf Lager
Rear Shock Tower/Rear Upper Mount RO2.0
YOK-RO-018RD
CHF11.90
Nicht auf Lager
Gear Box RO2.0
YOK-RO-302D
CHF8.90
Nicht auf Lager
Steel Top Shaft RO2.0
YOK-RO-303TS
CHF17.50
Nicht auf Lager
Aluminium Motor Plate RO2.0
YOK-RO-304D
CHF11.90
Nicht auf Lager
Gear Cover / Rear Wing Mount RO2.0
YOK-RO-304GC
CHF7.90
Nicht auf Lager
Resin Shock Cap Balls für RS2.0
YOK-RS-8B
Plastic shock cap balls used in RookieSpeed RS2.0. 4pcs.
CHF3.90
Auf Lager  
+ −
1.8mm 2-Hole Pistons für 13mm Shocks SO/MO
YOK-S4-S182-25
This is a piston for SO/MO series 13mm big bore shocks. The hole diameter is 2 holes of 1.8 to 2.0mm, but the piston thickness is set to 2.5mm to obtain firm damping due to hydrodynamic action. Packed 2 pieces each.
CHF6.90
Nicht auf Lager
1.9mm 2-Hole Piston für 13mm Shocks SO/MO
YOK-S4-S192-25
This is a piston for SO/MO series 13mm big bore shocks. The hole diameter is 2 holes of 1.8 to 2.0mm, but the piston thickness is set to 2.5mm to obtain firm damping due to hydrodynamic action. Packed 2 pieces each.
CHF6.90
Nicht auf Lager
2.0mm 2-Hole Pistons für 13mm Shocks SO/MO
YOK-S4-S202-25
This is a piston for SO/MO series 13mm big bore shocks. The hole diameter is 2 holes of 1.8 to 2.0mm, but the piston thickness is set to 2.5mm to obtain firm damping due to hydrodynamic action. Packed 2 pieces each.
CHF6.90
Nicht auf Lager
Front Sway Bar 0.9mm for SO Series (1pcs)
YOK-SO-412F09
Front sway bar for SO series, available in 3 types from Φ0.9 to 1.1mm, one each for easy purchase.
CHF3.90
Auf Lager  
+ −
Front Sway Bar 1.0mm for SO Series (1pcs)
YOK-SO-412F10
Front sway bar for SO series, available in 3 types from Φ0.9 to 1.1mm, one each for easy purchase.
CHF3.90
Auf Lager  
+ −
Front Sway Bar 1.1mm for SO Series (1pcs)
YOK-SO-412F11
Front sway bar for SO series, available in 3 types from Φ0.9 to 1.1mm, one each for easy purchase.
CHF3.90
Auf Lager  
+ −
Aluminum Steering Bellcrank Set for RD2.0
YOK-RD-202A
Aluminum steering bellcrank set for RD2.0. By adding a forward lean angle to the wiper post, it reduces bump changes when a cutting angle is added and shows neutral characteristics. Also, the servo rod mounting length can be adjusted with a spacer, allowing the feeling to be changed according to...
CHF69.00
Nicht auf Lager
Steel Front Axle for double Bearing
YOK-RD-010FDA
This is a front axle sold separately, used for the double-bearing design that provides the ultimate in front tire rolling. While made of steel for increased strength, the 3mm shaft and hub shape provide a lightweight finish.
CHF14.90
Auf Lager  
+ −
Neu
40mm Fan Shroud for Mid Motor MS1.0
YOK-YM-FS40
This fan shroud is designed to be used in conjunction with a cooling fan on a touring car chassis to effectively increase the cooling effect of the motor. The 40mm fan shroud is attached to the chassis with double-sided tape to direct the airflow from the fan to the engine, and can be used not...
CHF13.90
Auf Lager  
+ −
Verfügbarkeit
Verfügbar beim Lieferanten
Abmessungen
Auswahlhilfe
Material
Preis

CHF  –  CHF

  • ‎CHF1.5
  • ‎CHF949
Reifen/Rad-Typ
Servo-Typ
Verwendung
Massstab
Motor / Antrieb
Einsatz
Anspruch
Lackierung
Fertigungsgrad
Max. Geschwindigkeit
Marke
Betriebsspannung
Zurücksetzen (reset)