ERSATZTEIL-FINDER

Yokomo

Ordnen nach:
Empfohlen
24
Main Chassis RO2.0
YOK-RO-002
CHF36.90
Nicht auf Lager
Rear Shock Tower/Rear Upper Mount RO2.0
YOK-RO-018RD
CHF11.90
Nicht auf Lager
Gear Box RO2.0
YOK-RO-302D
CHF8.90
Nicht auf Lager
Steel Top Shaft RO2.0
YOK-RO-303TS
CHF17.50
Nicht auf Lager
Aluminium Motor Plate RO2.0
YOK-RO-304D
CHF11.90
Nicht auf Lager
Gear Cover / Rear Wing Mount RO2.0
YOK-RO-304GC
CHF7.90
Nicht auf Lager
Resin Shock Cap Balls für RS2.0
YOK-RS-8B
Plastic shock cap balls used in RookieSpeed RS2.0. 4pcs.
CHF3.90
Auf Lager  
+ −
1.8mm 2-Hole Pistons für 13mm Shocks SO/MO
YOK-S4-S182-25
This is a piston for SO/MO series 13mm big bore shocks. The hole diameter is 2 holes of 1.8 to 2.0mm, but the piston thickness is set to 2.5mm to obtain firm damping due to hydrodynamic action. Packed 2 pieces each.
CHF6.90
Auf Lager  
+ −
1.9mm 2-Hole Piston für 13mm Shocks SO/MO
YOK-S4-S192-25
This is a piston for SO/MO series 13mm big bore shocks. The hole diameter is 2 holes of 1.8 to 2.0mm, but the piston thickness is set to 2.5mm to obtain firm damping due to hydrodynamic action. Packed 2 pieces each.
CHF6.90
Auf Lager  
+ −
2.0mm 2-Hole Pistons für 13mm Shocks SO/MO
YOK-S4-S202-25
This is a piston for SO/MO series 13mm big bore shocks. The hole diameter is 2 holes of 1.8 to 2.0mm, but the piston thickness is set to 2.5mm to obtain firm damping due to hydrodynamic action. Packed 2 pieces each.
CHF6.90
Auf Lager  
+ −
Front Sway Bar 0.9mm for SO Series (1pcs)
YOK-SO-412F09
Front sway bar for SO series, available in 3 types from Φ0.9 to 1.1mm, one each for easy purchase.
CHF3.90
Auf Lager  
+ −
Front Sway Bar 1.0mm for SO Series (1pcs)
YOK-SO-412F10
Front sway bar for SO series, available in 3 types from Φ0.9 to 1.1mm, one each for easy purchase.
CHF3.90
Auf Lager  
+ −
Front Sway Bar 1.1mm for SO Series (1pcs)
YOK-SO-412F11
Front sway bar for SO series, available in 3 types from Φ0.9 to 1.1mm, one each for easy purchase.
CHF3.90
Auf Lager  
+ −
Aluminum Steering Bellcrank Set for RD2.0
YOK-RD-202A
Aluminum steering bellcrank set for RD2.0. By adding a forward lean angle to the wiper post, it reduces bump changes when a cutting angle is added and shows neutral characteristics. Also, the servo rod mounting length can be adjusted with a spacer, allowing the feeling to be changed according to...
CHF69.00
Nicht auf Lager
Steel Front Axle for double Bearing
YOK-RD-010FDA
This is a front axle sold separately, used for the double-bearing design that provides the ultimate in front tire rolling. While made of steel for increased strength, the 3mm shaft and hub shape provide a lightweight finish.
CHF14.90
Auf Lager  
+ −
40mm Fan Shroud for Mid Motor MS1.0
YOK-YM-FS40
This fan shroud is designed to be used in conjunction with a cooling fan on a touring car chassis to effectively increase the cooling effect of the motor. The 40mm fan shroud is attached to the chassis with double-sided tape to direct the airflow from the fan to the engine, and can be used not...
CHF13.90
Auf Lager  
+ −
40T Pulley for Front Solid Axle RS1.0/RS2.0
YOK-RS-501SP
CHF6.90
Auf Lager  
+ −
Body Wax 35cc
YOK-CS-WB
Dieses Karosseriewachs ist für Polycarbonat- und Kunststoffkarosserien von RC-Fahrzeugen geeignet und wird in einer praktischen Quetschflasche geliefert. Einfach etwas Wachs herausdrücken und mit einem weichen Tuch auftragen – so lassen sich Staub und Schmutz leicht entfernen und der Glanz der...
CHF14.90
Auf Lager  
+ −
Machine Cut 38T Pulley for Aluminium Gear Diff
YOK-MS-503GP
CHF21.90
Auf Lager  
+ −
O-Ring for Aluminium Gear Diff BD11/BD12/MS1.0
YOK-MS-503GO
CHF2.90
Auf Lager  
+ −
Yokomo Multi Spring Case
YOK-YT-29
This spring case allows you to neatly store shock springs, which tend to be cumbersome. The lower section is designed to hold springs for a variety of spring types, from speed to off-road, and the upper section can hold springs in their bagged state. Of course, it comes with the Yokomo Racing...
CHF31.90
Auf Lager  
+ −
Universal 30mm Fan Shroud
YOK-YM-FS30
This fan shroud is fitted to a 30mm fan to increase cooling efficiency through the channel effect. It is mounted on an adjustable angle bracket and can be installed on a variety of machines. It is particularly suitable for drift cars that require engine cooling and can be attached to the upper...
CHF14.90
Auf Lager  
+ −
Shock Diaphragm (soft) MS1.0/Big Bore Shocks
YOK-YS-8DS2
Diaphragm for MS series and big bore shocks for drifting. The weak resilience of the soft type is effective in increasing traction on low-grip surfaces.
CHF7.90
Auf Lager  
+ −
Aluminum Height Gauge for Touring Car (3-7.5mm)
YOK-YT-HGTC2
Height gauge for touring cars that require detailed measurements. Made from high precision aluminium, the front and back can be used separately to measure in 0.1mm increments. The engraving is large and easy to read, allowing quick readings even during busy race intervals.
CHF20.90
Nicht auf Lager
Verfügbarkeit
Verfügbar beim Lieferanten
Abmessungen
Auswahlhilfe
Material
Preis

CHF  –  CHF

  • ‎CHF1.5
  • ‎CHF949
Reifen/Rad-Typ
Servo-Typ
Verwendung
Massstab
Motor / Antrieb
Einsatz
Anspruch
Lackierung
Fertigungsgrad
Max. Geschwindigkeit
Marke
Betriebsspannung
Zurücksetzen (reset)