Français (CH)
ERSATZTEIL-FINDER

Yokomo

Trier par:
Recommandé
Montrer:
24
HD f5.5mm Rod end ball (Screw 8mm long/4pcs) for Y
YOK-Z2-206-8A
entspricht: Z2-206-8
CHF 6.90
En stock
+ −
Upper Deck for B7-FMC
YOK-B7-00315
 
CHF 22.90
En stock
+ −
Suspension Mount messing 44.2mm 12.4gr.
YOK-B7-3142FRB
Brass -1mm lower front suspension mount (Rear side 44.2mm·12.4g)
CHF 22.90
En stock
+ −
Front suspension arm for YZ-2T
YOK-Z2-008FTA
entspricht: Z2-008FT
CHF 14.00
En stock
+ −
Graphite Rear Shock Tower SO3.0
YOK-SO-018
CHF 22.90
En stock
+ −
Stabi Set (werden 2x für 1 Fahrzeug benötigt) YZ-4
YOK-Z4-412
CHF 22.50
En stock
+ −
Rear hard stabilizer set for YZ-2/4
YOK-Z2-412RH
 
CHF 29.90
En stock
+ −
Front Susp. Mount messing (rear side 43.5mm 12.2gr)
YOK-B7-3135FRB
 
CHF 22.50
En stock
+ −
Main chassis (Hard alumite) for YZ-4SF2
YOK-S4-002S2A
entspricht: S4-002S2
CHF 89.90
En stock
+ −
Light weight slide rack für YD-2Z
YOK-Y2-202SZA
A slide rack set that fits the YD-2Z chassis. Teams products with rails that have been reshaped and milled, and are effective in improving steering response and kinetic performance by reducing weight.
CHF 89.90
En stock
+ −
Ceramic Kugellager 5x10x4mm 2stk.
YOK-BB-1050CBA
entspricht: BB-1050CB
CHF 13.90
En stock
+ −
Teams Alu Achsschenkel hinten 3teilig für YD2
YOK-Y2-415ART
This aluminum rear hub carrier can be used commonly with the YD-2 series. The universal shaft with a short axle shaft for narrow scrubs is used, and the universal joint pin is positioned as far outward as possible, closer to the outer suspension arm pin, to activate the suspension movement and...
CHF 89.90
En stock
+ −
Graphite front shock tower(Gull type)
YOK-Z2-017GA
 
CHF 16.50
En stock
+ −
Slide Rack Set for RD1.0/2.0
YOK-RD-202SR
Slide rack set for use with RD1.0 and 2.0 to further increase the cutting angle.Use the mount on the servo rear side that comes standard with the kit.
CHF 89.90
En stock
+ −
Steering hub carrier / bushing YZ-2 DTM3.1/CAL3.1
YOK-Z2-413G3A
Graphite molded steering hub carrier for YZ-2 DTM3.1 / CAL3.1. The kingpin position has been changed to the front side compared to the past, and the shape has been changed to attach the steering stopper. Uses graphite resin, which is harder than the standard, and improves steering response.
CHF 17.90
En stock
+ −
Aluminum SLF Big Bore Shock Set Blue
YOK-Y2-SBBSBL
Super low friction aluminum big bore shock set in blue anodized aluminum color. The cylinder diameter is wider than conventional shocks and the shock length is newly designed for drifting. Large capacity and increased stability.
CHF 89.90
En stock
+ −
Full counter solid axle set (Rear×1.8/Red)
YOK-IB-FCD18R
 
CHF 44.90
En stock
+ −
Shock End Plastic Parts (S/M/L size) YZ-2DTM/YZ-4
YOK-Z2-S6MA
 
CHF 7.90
En stock
+ −
Rotor Magnet D12.3xd5.00 M3 Motor
YOK-RP-058
 
CHF 44.90
En stock
+ −
Graphite Bumper für YD-2
YOK-Y2-001GBA
entspricht: Y2-001GB
CHF 44.90
En stock
+ −
Messing Front Gewicht L/R 35gr. für BDFWD/BD10F
YOK-B10-BWF35
This front weight effectively increases the front traction of FWD cars. Made of black coated brass, weighing approx. 35g per side or approx. 70g on both sides, they can be screwed on for both BDFWD and BD10F, so there is no need to worry about them falling off while driving or in a...
CHF 44.90
En stock
+ −
Slipper Pad
YOK-B2-670CA
entspricht: B2-670C
CHF 8.90
En stock
+ −
Shock Body
YOK-B9-S4S
CHF 29.90
En stock
+ −
BD-10 Cross Plate (Cross Plate Post
YOK-B10-118CPA
entspricht: B10-118CP
CHF 29.90
En stock
+ −
Verfügbarkeit
Verfügbar beim Lieferanten
Abmessungen
Auswahlhilfe
Material
Prix
CHF
–
CHF
  • CHF 1.5
  • CHF 849
Reifen/Rad-Typ
Servo-Typ
Verwendung
Massstab
Motor / Antrieb
Einsatz
Anspruch
Lackierung
Fertigungsgrad
Max. Geschwindigkeit
Marke
Betriebsspannung