Yokomo

YOK-B9-BW30A
30g
CHF21.90
Auf Lager  
+
YOK-B10-WHAS1A
BD-919/BD10/BD10LC Axle/Spacer for AXON Super Hub Axle
CHF21.90
Auf Lager  
+
YOK-Z2-303TA3A
For Z2-670S
CHF17.90
Auf Lager  
+
CHF17.50
Auf Lager  
+
YOK-BD-008RE1
This is intended for increasing the steering response in order to increase the cornering speed at high grip surface condition.
CHF12.50
Auf Lager  
+
YOK-BB-106-4A
entspricht: BB-106-4
CHF13.90
Auf Lager  
+
CHF28.90
Auf Lager  
+
CHF28.90
Auf Lager  
+
YOK-D-CFSA
A cooling fan that uses a luxurious aluminum frame. With a 30mm size that is ideal for cooling the motor, having a lineup of three colors, silver, red, and purple, which would match with variations of the YD-2 series. The connector is a pin shaped that will be easy to connect with the power...
CHF33.90
Auf Lager  
+
CHF28.90
Auf Lager  
+
CHF42.90
Auf Lager  
+
YOK-Z2-415SH3A
Hard type
CHF7.90
Auf Lager  
+
YOK-Z2-TBSD3A
with Wrench
CHF42.90
Auf Lager  
+
YOK-Y2-REM-PA
A ESC mount set that can change the weight balance of the chassis by mounting the ESC on the rear overhang and greatly enhance the rear traction. Especially effective on roads with low grip, the load applied to the rear tires at the corner exit is overwhelming! It is possible to get a...
CHF42.90
Auf Lager  
+
YOK-RP-6313W6A
In reflect with the demand for more road trace feels at low traction track surface, Yokomo will release new high traction wheels under Racing Performer brand. T
Auswahlhilfe190mm Touring MaterialDrift Reifen/Rad-TypFelgen Massstab1:10 EinsatzOn-Road Drift
CHF9.50
Auf Lager  
+
YOK-Y2-REM-RA
A ESC mount set that can change the weight balance of the chassis by mounting the ESC on the rear overhang and greatly enhance the rear traction. Especially effective on roads with low grip, the load applied to the rear tires at the corner exit is overwhelming! It is possible to get a...
CHF42.90
Auf Lager  
+
YOK-RD-301AS
This aluminum suspension mount set for RD2.0 further enhances driving performance. The B width for the front is 43.5mm standard, and the D width for the rear is 57.2mm standard for both the front and rear sides, but the suspension pin width can be fine-tuned by changing the suspension mount...
CHF85.50
Auf Lager  
+
CHF39.90
Auf Lager  
+
YOK-B10-302CMA
entspricht: B10-302CM
CHF84.90
Auf Lager  
+
CHF84.90
Auf Lager  
+
CHF29.90
Auf Lager  
+
CHF16.90
Auf Lager  
+
YOK-Y2-008RW10
This optional part for the RD2.0/SD2.0 combines an aluminum rear H-arm with a brass weight to systematically increase rear traction. By mounting the weight on the rigid aluminum H-arm, the unsprung weight, which is directly loaded on the rear tires, is increased, effectively increasing tire...
CHF41.90
Auf Lager  
+
YOK-Z2-413G3A
Graphite molded steering hub carrier for YZ-2 DTM3.1 / CAL3.1. The kingpin position has been changed to the front side compared to the past, and the shape has been changed to attach the steering stopper. Uses graphite resin, which is harder than the standard, and improves steering response.
CHF17.90
Auf Lager  
+
Verfügbarkeit
Verfügbar beim Lieferanten
Abmessungen
Auswahlhilfe
Material
Preis

CHF  –  CHF

  • ‎CHF1.5
  • ‎CHF949
Reifen/Rad-Typ
Servo-Typ
Verwendung
Massstab
Motor / Antrieb
Einsatz
Anspruch
Lackierung
Fertigungsgrad
Max. Geschwindigkeit
Marke
Betriebsspannung