Français (CH)
ERSATZTEIL-FINDER

Yokomo

Trier par:
Recommandé
Montrer:
24
Rear Lower Suspension Arm 39.5mm Extra Hard BD-8
YOK-BD-008RE1
This is intended for increasing the steering response in order to increase the cornering speed at high grip surface condition.
CHF 12.50
En stock  
+ −
RP Driftfelge High Tract.(6mm Offset) weiss 1paar
YOK-RP-6313W6A
In reflect with the demand for more road trace feels at low traction track surface, Yokomo will release new high traction wheels under Racing Performer brand. T he new high traction wheels are all 6mm offsets and with 3 selectable colors, Titanium, Yellow and White. Besides, the edge of the...
Auswahlhilfe190mm Touring MaterialDrift Reifen/Rad-TypFelgen Massstab1:10 EinsatzOn-Road Drift
CHF 9.50
En stock  
+ −
Aluminum steering belcrunk
YOK-Z2-201BA
 
CHF 28.90
En stock  
+ −
Ventilated Dual Slipper Set YZ-2/B-Max2
YOK-Z2-670V
CHF 39.90
En stock  
+ −
YD-4 Solid/One Way FCD Gear Set (Front x 0.59)
YOK-Y4-64359
 
CHF 28.90
En stock  
+ −
Aluminum Servo Mount SO3.0
YOK-SO-203
CHF 28.90
En stock  
+ −
Front Balance Weight (L/R 1 each·10g)
YOK-B7-BWF10
CHF 29.90
En stock  
+ −
Graphite Rear Axle for World conversion
YOK-R12-24SN
 
CHF 42.90
En stock  
+ −
Titanium turn buckle set for YZ-2DTM3
YOK-Z2-TBSD3A
with Wrench
CHF 42.90
En stock  
+ −
Steering hub carrier / bushing YZ-2 DTM3.1/CAL3.1
YOK-Z2-413G3A
Graphite molded steering hub carrier for YZ-2 DTM3.1 / CAL3.1. The kingpin position has been changed to the front side compared to the past, and the shape has been changed to attach the steering stopper. Uses graphite resin, which is harder than the standard, and improves steering response.
CHF 17.90
En stock  
+ −
Rear ESC mount for YD-2 series
YOK-Y2-REM-RA
A ESC mount set that can change the weight balance of the chassis by mounting the ESC on the rear overhang and greatly enhance the rear traction. Especially effective on roads with low grip, the load applied to the rear tires at the corner exit is overwhelming! It is possible to get a...
CHF 42.90
En stock  
+ −
Steering Block BD9/BD10
YOK-B9-415SA
entspricht: B9-415S
CHF 11.50
En stock  
+ −
Aluminum center mount for BD10F
YOK-B10-302CMA
entspricht: B10-302CM
CHF 84.90
En stock  
+ −
Alum.Main Chassis for MO Series
YOK-MO-002
CHF 84.90
En stock  
+ −
Rear hub carrier/Bushing (F3 pin/Hard type) DTM3/C
YOK-Z2-415RDCA
Hard type
CHF 11.50
En stock  
+ −
Alum.Main Chassis for MO3.0
YOK-MO-002-3
CHF 84.90
En stock  
+ −
Aluminum Separate Suspension Mount (44.2mm)
YOK-B7-30142
 
CHF 16.90
En stock  
+ −
Rear suspension arm Type-B (F3 outer pin) for YZ-2
YOK-Z2-008R3A
F3 Outer pin spec
CHF 7.90
En stock  
+ −
Brass Rear H Arm Weight A (10g)
YOK-Y2-008RW10
This optional part for the RD2.0/SD2.0 combines an aluminum rear H-arm with a brass weight to systematically increase rear traction. By mounting the weight on the rigid aluminum H-arm, the unsprung weight, which is directly loaded on the rear tires, is increased, effectively increasing tire...
CHF 41.90
En stock  
+ −
Turnbucke Upper Arm Set for MS1.0
YOK-MS-008T
This is a turnbuckle adjustable upper arm set that makes the most of the MS1.0's greatest feature, the linkage-type upper A-arm. This single set of front and rear upper arms allows for camber changes as well as fine caster angle adjustments.
CHF 41.90
En stock  
+ −
steel rear suspension mount for YZ-2T / YZ-2 (fron
YOK-Z2-300RFSA
This is a steel suspension mount for the YZ-2 series. It is a type used on the front side of the rear suspension, it increase the rear traction by increasing the weight compared to standard aluminum
CHF 26.90
En stock  
+ −
Front W/J Universal Set (Bearing type)
YOK-MS-010FWS
Universal Design with bearings mounted on the dogbones to reduce sliding resistance with the joint axle to the upmost limit. This reduces drive loss and stabilizes suspension operation, thereby increasing cornering speed.
CHF 83.80
En stock  
+ −
Aluminium Radträger 2Stk. MS2.0
YOK-MS-415A-2
CHF 41.90
En stock  
+ −
Steering Block L/R YZ-4
YOK-Z4-415SA
 
CHF 8.90
En stock  
+ −
Verfügbarkeit
Verfügbar beim Lieferanten
Abmessungen
Auswahlhilfe
Material
Prix
CHF
–
CHF
  • CHF 1.5
  • CHF 849
Reifen/Rad-Typ
Servo-Typ
Verwendung
Massstab
Motor / Antrieb
Einsatz
Anspruch
Lackierung
Fertigungsgrad
Max. Geschwindigkeit
Marke
Betriebsspannung