ERSATZTEIL-FINDER

Yokomo

Ordnen nach:
Empfohlen
24
Graphite rear lower suspension arm (R) -1.0mm
YOK-B11-008RR1
This suspension arm was used by team drivers and achieved good results at the 2023 IFMAR World Championship. It is 1mm shorter than standard, making it easier for the roll force to work to improve traction. It is especially suitable for road conditions with low grip, such as outdoor asphalt,...
CHF36.90
Auf Lager  
+ −
Ball End Cap YD-4
YOK-Y4-207A
entspricht: Y4-207
CHF9.90
Auf Lager  
+ −
Graphite rear lower suspension arm (L)-1.0mm
YOK-B11-008RL1
This suspension arm was used by team drivers and achieved good results at the 2023 IFMAR World Championship. It is 1mm shorter than standard, making it easier for the roll force to work to improve traction. It is especially suitable for road conditions with low grip, such as outdoor asphalt,...
CHF36.90
Auf Lager  
+ −
Bell crank (F8×F5 bearing assembled)
YOK-B7-202SB
 
CHF35.90
Auf Lager  
+ −
Alu Shim 3x6x3.0mm (Black)
YOK-ZC-A3630BA
entspricht: ZC-A3630B
CHF5.90
Auf Lager  
+ −
Front Univ. Shaft 79mm YZ-4
YOK-Z4-01079
 
CHF35.90
Auf Lager  
+ −
Slide Rack YD-4
YOK-Y4-202R
 
CHF35.90
Auf Lager  
+ −
Fluorine Rubber Diaphragm für SLF Short Shock II
YOK-B7-8DF16
CHF5.90
Auf Lager  
+ −
Aluminum front lower bulkhead (A) BD11
YOK-B11-32FLAA
entspricht: B11-32FLA
CHF35.90
Auf Lager  
+ −
Aluminum front lower bulkhead (B) BD11
YOK-B11-32FLBA
entspricht: B11-32FLB
CHF35.90
Auf Lager  
+ −
Camber Gauge PRO (Black)
YOK-YT-CGPA
entspricht: YT-CGP
CHF16.90
Auf Lager  
+ −
Brass center stiffener for BD12
YOK-B12-302CSB
CHF35.90
Auf Lager  
+ −
Alum.St.Bellcrank set for RO1.0/SO1.0
YOK-Z2-201SBS
This is an aluminum bell crank set that gives the RO1.0/SO1.0 steering even sharper.
CHF71.80
Auf Lager  
+ −
Racing Performer F3.5 Bullet/Female Connecter set
YOK-RP-107A
3.5mm diameter banana connector used for motor connection. Set of 3 male/female set
CHF8.00
Auf Lager  
+ −
Aluminum Steering Bell Crank L/R SD3.0
YOK-SD-202S3
CHF35.90
Auf Lager  
+ −
Alum.Servo Mount for MO2.0
YOK-MO-203A
CHF23.90
Auf Lager  
+ −
Nickel hard steel turn buckle 48mm 2stk.
YOK-SD-TB48NA
entspricht: SD-TB48N
CHF4.50
Auf Lager  
+ −
Alminum Suspension mount (43.5mm·Black)
YOK-B7-3135B
 
CHF17.90
Auf Lager  
+ −
Aluminum Separate Suspension Mount (42.0mm)
YOK-B7-3120BS
 
CHF17.90
Auf Lager  
+ −
Ball differential kit for MR/RS
YOK-B2-500MR
 
CHF49.90
Auf Lager  
+ −
Graphite molded front steering hub carrier BD12
YOK-B12-413G
CHF17.90
Auf Lager  
+ −
Graphite molded LC Gearbox SO1.0/2.0
YOK-Z2-302TLCG
This is the LC gearbox for the SO series of 2WD off-road cars. Graphite-mixed resin, which is harder than standard, is used to increase the rigidity of the rear area. Especially when the throttle is turned on, there is less yawing and snagging, allowing for sharper cornering.
CHF17.90
Auf Lager  
+ −
Hybrid front shock tower YD-2 rot
YOK-Y2-017AGRA
A front shock tower that fits into all YD-2 series cars. The upper shock tower ensures sufficient rigidity by being lightweight and highly rigid graphite with 3 mm thick. The upper arm holder is made of aluminum to increase rigidity and accuracy. The lineup includes three colors of black / red /...
CHF49.90
Auf Lager  
+ −
Flex Gear Differential Oil(35cc) DOT5
YOK-CS-DOT5
Oel-Vergleichstabelle #650 = DOT1 #800 = DOT2 #1000 = DOT3 #1200 = DOT4 #1600 = DOT5 #2100 = DOT6 #3000 = DOT7
CHF11.90
Auf Lager  
+ −
Verfügbarkeit
Verfügbar beim Lieferanten
Abmessungen
Auswahlhilfe
Material
Preis

CHF  –  CHF

  • ‎CHF1.5
  • ‎CHF949
Reifen/Rad-Typ
Servo-Typ
Verwendung
Massstab
Motor / Antrieb
Einsatz
Anspruch
Lackierung
Fertigungsgrad
Max. Geschwindigkeit
Marke
Betriebsspannung
Zurücksetzen (reset)