ERSATZTEIL-FINDER

Yokomo

Trier par:
Recommandé
24
Aluminum Height Gauge for Touring Car (3-7.5mm)
YOK-YT-HGTC2
Height gauge for touring cars that require detailed measurements. Made from high precision aluminium, the front and back can be used separately to measure in 0.1mm increments. The engraving is large and easy to read, allowing quick readings even during busy race intervals.
CHF20.90
En stock  
+ −
Rear Universal Assy. (Bearing type/1pcs.)
YOK-MS-010R
CHF30.80
En stock  
+ −
Center Balance Weight
YOK-B9-BW20A
20g
CHF20.50
En stock  
+ −
Graphite Front Body Mount Support
YOK-BD-016FS
CHF14.90
En stock  
+ −
High Traction Chassis BD5
YOK-BD-002H
 
CHF59.90
En stock  
+ −
Front stabilizer set YZ-2 (6 wires)
YOK-Z2-412F2
CHF21.00
En stock  
+ −
Front X Shock Set
YOK-BM-1S12
 
CHF59.90
En stock  
+ −
Aluminum front lower A arm for 2WD DRIFT Conv.
YOK-D-164
 
CHF59.90
En stock  
+ −
YZ-2 Alu Center Link
YOK-Z2-201CL3A
entspricht: Z2-201CL3
CHF22.90
En stock  
+ −
2 way motor mount for Drift Package (Black)
YOK-TS-2147B
 
CHF59.90
En stock  
+ −
Aluminum Rear H Arm (Weight Spec/Short)
YOK-Y2-008RAW
This optional part for the RD2.0/SD2.0 combines an aluminum rear H-arm with a brass weight to systematically increase rear traction. By mounting the weight on the rigid aluminum H-arm, the unsprung weight, which is directly loaded on the rear tires, is increased, effectively increasing tire...
CHF59.90
En stock  
+ −
Graphite Center Drive Shaft SD-9
YOK-SD-644WA
 
CHF41.90
En stock  
+ −
FRP Main Chassis Super Dog Fighter Works 91
YOK-YZ-002W1
CHF59.90
En stock  
+ −
Aluminum Rear Hub Carrier Blue für RD2.0/SD3.0
YOK-RD-415ARBL
Aluminum rear hub carrier for RD/SD series. It is more rigid than the standard plastic one, and improves rear traction and slide control. Upper arm fixing positions allow for more precise adjustment of camber change due to suspension stroke. The lower suspension arm pins can also be selected from...
CHF59.90
En stock  
+ −
Aluminium Front Upper Mount YZ-4
YOK-Z4-300FU
 
CHF27.90
En stock  
+ −
Front Bulkhead Cap left 2016
YOK-B7-32FL16
CHF29.90
En stock  
+ −
Aluminum Rear Shock Tower for YD-2S
YOK-Y2-018ARSA
Yokomo will release new Aluminum Shock Tower for YD-2S series which is a higher mount motor layout, 4 gear transmission RWD drift chassis kit. This new shock tower will perform the best freedom in super set with a rear short suspension arm which has also released just before. The...
CHF49.90
En stock  
+ −
Rear Bulkhead Cap right 2016
YOK-B7-32RR16
 
CHF29.90
En stock  
+ −
Rear Bulkhead Cap left 2016
YOK-B7-32RL16
 
CHF29.90
En stock  
+ −
Aluminum Front Upper I Arm (Purple) for YD-2
YOK-Y2-P08FUIA
An aluminum I arm used for the front upper arm of the YD-2 series. Red anodized color that matches the red version of the YD-2 series. By moving the spacer, the caster angle can be adjusted in the range of 7mm back and forth. Although it is made of highly rigid aluminum, it has been made as...
CHF49.90
En stock  
+ −
Adjustable rear lower short ”H” arm (Right/Alu Bev
YOK-Y2-008RS2A
entspricht: Y2-008RS2
CHF29.90
En stock  
+ −
BD-10 Shock cylinder  (HVFcosting (HVFcosting 2pcs)
YOK-B10-S4SA
entspricht: B10-S4S
CHF29.90
En stock  
+ −
S74mm Rear Susp. Arm L/R Kit YZ-4
YOK-Z4-008RS4
CHF8.90
En stock  
+ −
Upper bulkhead for BD-919 / BD10 / BD10LC (B) (F r
YOK-B10-32UBA
Chamfered Front / Rear Upper Bulkhead [B] FR / RL for BD-10LC / BD-10 / BD919
CHF29.90
En stock  
+ −
Verfügbarkeit
Verfügbar beim Lieferanten
Abmessungen
Auswahlhilfe
Material
Prix

CHF  –  CHF

  • ‎CHF1.5
  • ‎CHF949
Reifen/Rad-Typ
Servo-Typ
Verwendung
Massstab
Motor / Antrieb
Einsatz
Anspruch
Lackierung
Fertigungsgrad
Max. Geschwindigkeit
Marke
Betriebsspannung
Effacer