Deutsch (CH)
ERSATZTEIL-FINDER

Yokomo

Ordnen nach:
Empfohlen
Zeigen:
24
High Grade O-Ring (oil resistant blue, 8stk.)
YOK-YS-7HG2
CHF 8.90
Auf Lager  
+ −
Progressive Federn 1.80 bis 2.10 20mm
YOK-B10-SSP18
This new spring matches the BD11 with a lower lever ratio than before. The overall setting is softer, making it a perfect match for the BD11's long suspension arms. You can find a good balance by choosing from this lineup for both front and rear. The progressive type spring has a pitch change...
CHF 12.90
Auf Lager  
+ −
Progressive Federn BD11 1.90-2.20 20mm
YOK-B10-SSP19
This new spring matches the BD11 with a lower lever ratio than before. The overall setting is softer, making it a perfect match for the BD11's long suspension arms. You can find a good balance by choosing from this lineup for both front and rear. The progressive type spring has a pitch change...
CHF 12.90
Auf Lager  
+ −
Progressive Federn BD11 2.10 bis 2.40 20mm
YOK-B10-SSP21
CHF 12.90
Auf Lager  
+ −
Yokomo Factory Jacke XL
YOK-ZC-J27XLA
A windproof jacket with the Yokomo Racing Factory logo on the chest and back. Light nylon fabric, perfect for changing seasons. It has a slightly larger size.
CHF 37.90
Auf Lager  
+ −
Yokomo Factory Jacke L
YOK-ZC-J27LA
entspricht: ZC-J27L
CHF 37.90
Auf Lager  
+ −
Rear hub carrier link mount für S4-415RS
YOK-S4-415RLA
entspricht: S4-415RL
CHF 14.90
Auf Lager  
+ −
Rear short shock shaft for YZ-2DTM3/CAL3
YOK-S4-S2MA
entspricht: S4-S2M
CHF 9.50
Auf Lager  
+ −
Inline Battery holder conversion für MD1.0
YOK-MD-CONV
This is a battery holder conversion to change the battery mounting of MD1.0 to inline mounting. When the car has a certain degree of grip, mounting the battery inline (in the front-back direction of the chassis) suppresses chassis roll, enabling sharper movement when transitioning to an...
CHF 43.90
Auf Lager  
+ −
4 gear transmission conversion MD1.0
YOK-MD-CON4
The standard MD1.0 transmission has 3 gears and positive torque, but by adding a counter gear and reconfiguring it, this conversion set can be used with 4 gears and anti-torque specifications. Compared to a 3-gear transmission, the additional gear increases drive loss, but the...
CHF 37.90
Auf Lager  
+ −
YZ-2CAL3.1/DTM3.1 Side plate (graphite molding)
YOK-Z2-002SG
Side plate for YZ-2CAL3.1/DTM3.1. Graphite-mixed resin is used to increase rigidity and improve steering response, especially on high-grip surfaces. In particular, pitching rigidity is increased, enabling the driver to gain a sense of stability from corner entry to clipping
CHF 14.90
Auf Lager  
+ −
Rear Upper Mount/Roll Bar Holder/Gear Box
YOK-Z2-300RG
This is a set of resin parts around the rear for YZ-2CAL3.1/DTM3.1/Rear Upper Mount, Roll Bar Holder, and Gear Box Support. Graphite-mixed resin is used to increase rigidity, which is effective in gaining rear stability when turning and improving traction when accelerating.
CHF 14.50
Auf Lager  
+ −
Rear Belt Tensioner BD11
YOK-B11-RBTS
Rear belt tensioner set for BD11. It is an effective part especially when a high-power motor is installed, and it is possible to suppress tooth jumping of the rear belt, improve drive efficiency, and make the belt itself last longer. European team drivers who participate in the ETS always wear...
CHF 16.90
Auf Lager  
+ −
Aluminum turnbuckle set for MD1.0
YOK-MD-TBS
This set converts the turnbuckles used in the MD series upper arms and tie rods to aluminum. 20mm/27mm/33mm turnbuckles are included, to reduce weight and improve suspension response.
CHF 21.50
Auf Lager  
+ −
YOKOMO Parts Case 86X103X34mm
YOK-YC-13
new lineup of parts cases with the Yokomo logo has been added to the series. The three new cases are suitable for storing relatively small parts, and feature a large number of movable dividers that can be positioned in a variety of ways. The body is made of polypropylene, which is...
CHF 8.90
Auf Lager  
+ −
YOKOMO Parts Case 205X145X40mm
YOK-YC-14
A new lineup of parts cases with the Yokomo logo has been added to the series. The three new cases are suitable for storing relatively small parts, and feature a large number of movable dividers that can be positioned in a variety of ways. The body is made of polypropylene, which is...
CHF 13.90
Auf Lager  
+ −
BD-919/BD10/BD10LC AXON super hub axle pin/"O" rin
YOK-B10-WHAS2A
entspricht: B10-WHAS2
CHF 4.50
Auf Lager  
+ −
Graphite front body mount stay for MD1.0
YOK-MD-016MG
CHF 34.90
Auf Lager  
+ −
Alu high mount Battery Post (R)
YOK-Y2-118RL
CHF 23.90
Auf Lager  
+ −
Alu hight mount battery post (F)
YOK-Y2-118FL
CHF 16.90
Auf Lager  
+ −
Drift LTS Front Spring 0.9x45x8.5turns
YOK-D-186
CHF 11.50
Auf Lager  
+ −
Drift LTS Front Spring 1.0×48mm×9.0turns
YOK-D-187
CHF 11.90
Auf Lager  
+ −
Drift LTS Rear Spring 1.0×48mm×10.0turns
YOK-D-188
CHF 11.90
Auf Lager  
+ −
F/R body mount for BD9/10/11 (hard)
YOK-B11-016H
CHF 9.90
Auf Lager  
+ −
Verfügbarkeit
Verfügbar beim Lieferanten
Abmessungen
Auswahlhilfe
Material
Preis
CHF
–
CHF
  • CHF 1.5
  • CHF 949
Reifen/Rad-Typ
Servo-Typ
Verwendung
Massstab
Motor / Antrieb
Einsatz
Anspruch
Lackierung
Fertigungsgrad
Max. Geschwindigkeit
Marke
Betriebsspannung
Zurücksetzen (reset)