Français (CH)
ERSATZTEIL-FINDER

Yokomo

Recommandés
48 Par page
Aluminum front lower A arm set for YD-2 (black)
YOK-Y2-AS06BA
entspricht: Y2-AS06B
CHF 79.90
En stock  
+ −
“X30”shock X ring(3.0mm)
YOK-S4-S3XA
entspricht: S4-S3X
CHF 6.50
En stock  
+ −
Aluminum front lower A arm set for YD-2 (red)
YOK-Y2-AS06RA
entspricht: Y2-AS06R
CHF 79.90
En stock  
+ −
BN Sports Toyota JZX100 Mark2 Body Set
YOK-SD-JZXBNB
The JZX100 Mark II, the most popular 4-door body, will be released as a new body for drifting. Moreover, the body is designed with BN Sports aero that brings out the power of a drift machine, and the one-piece molded body is easy to build and has a great silhouette. The all-in-one body also comes...
MaterialLexan Auswahlhilfe190mm Touring Massstab1:10 EinsatzOn-Road Drift Lackierungunlackiert
CHF 79.90
En stock  
+ −
Aluminum top shaft for YZ-2 Direct spur gear
YOK-Z2-303TADA
entspricht: Z2-303TAD
CHF 18.90
En stock  
+ −
Alu rear hub carrier (Toe-in 0.5°) for B-MAX4III
YOK-B4-415R05
 
CHF 39.90
En stock  
+ −
Achsschenkel Alu
YOK-C-415A
 
CHF 39.90
En stock  
+ −
Camber Gauge PRO (Black)
YOK-YT-CGPA
entspricht: YT-CGP
CHF 16.90
En stock  
+ −
Alu Motor Mount (Chamfer) YZ-4
YOK-Z4-304C
 
CHF 39.90
En stock  
+ −
Racing Performer Rotor D12.5xd5.00x25.3 for g.n.m.
YOK-RP-021
 
CHF 39.90
En stock  
+ −
Aluminum suspension mount for YZ-2T
YOK-Z2-300RFTA
entspricht: Z2-300RFT
CHF 22.90
En stock  
+ −
C-clip Universal Shaft
YOK-B7-010RA
C-clip Universal Shaft (Aluminum 44mm bone for Rear)
CHF 39.90
En stock  
+ −
RTC Universal shaft for BD8/BD7 2016
YOK-B8-RTC-04
 
CHF 39.90
En stock  
+ −
Drive Cup Protector BD9/BD10
YOK-B9-500DPA
(Hard)
CHF 6.50
En stock  
+ −
Multi Stand Team Yokomo
YOK-YT-MTS
Dieser Mehrfachständer nutzt den Platz im Pit effektiv und kann für die Lagerung von Maschinen, die Installation von Ladegeräten usw. verwendet werden. Dieser einfach zusammengebaute Ständer aus Harz kann beim Transport kompakt verstaut werden und wird schnell aufgebaut, wenn er im Pit...
CHF 39.90
En stock  
+ −
Brass Rear H Arm Weight B (5g)
YOK-Y2-008RW5
This optional part for the RD2.0/SD2.0 combines an aluminum rear H-arm with a brass weight to systematically increase rear traction. By mounting the weight on the rigid aluminum H-arm, the unsprung weight, which is directly loaded on the rear tires, is increased, effectively increasing tire...
CHF 39.90
En stock  
+ −
Rear Drive Belt
YOK-BD-189LA
entspricht: BD-189L
CHF 6.75
En stock  
+ −
Main Chassis RS2.0
YOK-RS-002P
CHF 39.90
En stock  
+ −
High Precision FH Screw Set (120°/31pcs) MS2.0
YOK-MS-SSA20
The aluminium chassis is ideal for high-grip surfaces, such as carpet. However, the MS2.0 aluminium chassis has a reduced plate thickness of 1.5 mm, allowing for greater flexibility in setup. Standard flat-head screws protrude beyond the chassis surface due to their 90-degree head taper, which...
CHF 39.90
En stock  
+ −
Ball End Cap YD-4
YOK-Y4-207A
entspricht: Y4-207
CHF 9.90
En stock  
+ −
Turnbuckle und Hardware Set für Yokomo SD
HSH-YOK-TURNHARD
Turnbuckle und Hardware Set für Yokomo SD
CHF 19.90
En stock  
+ −
Radial Tire Type Y Pre-Glued 11-Spoke Gray (4pcs.)
YOK-ZR-144TPM2
Pre-assembled and glued tires/wheels ideal for touring cars such as RS2.0. European-style 11-spoke shape in a medium narrow size. Pre-assembled and pre-glued radial type Y tires provide moderate grip on asphalt and carpeted surfaces, so you can install them on your machine and enjoy driving right...
CHF 19.90
En stock  
+ −
Nickel hard steel turn buckle 48mm 2stk.
YOK-SD-TB48NA
entspricht: SD-TB48N
CHF 4.50
En stock  
+ −
Center & Rear Pulley w/Frange YZ-4
YOK-Z4-630CR
 
CHF 9.90
En stock  
+ −
Fluorine Rubber Diaphragm für SLF Short Shock II
YOK-B7-8DF16
CHF 5.90
En stock  
+ −
Bell Crunk/Link/Servo Mount 17/20mm Servo Horn
YOK-Z2-200
 
CHF 19.50
En stock  
+ −
Adapter
YOK-YT-TSG
 
CHF 38.90
En stock  
+ −
Alu Front Steering Hub Carrier YD-4
YOK-Y4-413C
 
CHF 38.90
En stock  
+ −
Aluminium Servo Mount YD-4
YOK-Y4-203AA
 
CHF 23.90
En stock  
+ −
BD-10 Main Drive (Main Drive Pulley
YOK-B10-630MA
entspricht: B10-630M
CHF 25.90
En stock  
+ −
Aluminum wing plate
YOK-B7-110A
entspricht: B7-110
CHF 12.90
En stock  
+ −
Alu Sturzwinkel und Höhenmesser schwarz
YOK-YT-HCGBA
entspricht: YT-HCGB
CHF 25.90
En stock  
+ −
MO2.0 Body Shell w/Mask. (LW) for MO Series
YOK-MO-101LW
CHF 25.90
En stock  
+ −
Rear suspension arm for YZ-2T
YOK-Z2-008RTA
entspricht: Z2-008RT
CHF 14.00
En stock  
+ −
RTC Lower Caster block
YOK-B9-RTC-02A
Aluminum made
CHF 38.50
En stock  
+ −
Rear Universal Set (Bearing type)
YOK-MS-010RS
Universal Design with bearings mounted on the dogbones to reduce sliding resistance with the joint axle to the upmost limit. This reduces drive loss and stabilizes suspension operation, thereby increasing cornering speed.
CHF 77.00
En stock  
+ −
GOKURAKU wing 4.0
YOK-B7-GW40A
entspricht: B7-GW40
CHF 9.90
En stock  
+ −
Graphite Main Chassis YRX12
YOK-YX-02
 
CHF 76.90
En stock  
+ −
Aluminum motor mount for BD12
YOK-B12-302M
CHF 76.90
En stock  
+ −
Alu Shim 3x6x3.0mm (Black)
YOK-ZC-A3630BA
entspricht: ZC-A3630B
CHF 5.90
En stock  
+ −
Front Wheel
YOK-B4-821A
entspricht: B4-821
AuswahlhilfeBuggy MaterialKunststoff Reifen/Rad-TypFelgen Massstab1:10 EinsatzOff-Road
CHF 5.90
En stock  
+ −
Alu Top Shaft (Hard anodized) YZ-4
YOK-Z4-303TA
 
CHF 10.90
En stock  
+ −
Rear short shock shaft (titanium coat) for YZ-2DTM
YOK-S4-S2MTA
A shock shaft that can be used on the rear of the YZ-2DTM3 / CAL3 and the front of the YZ-2T. The shaft diameter is F3.0mm, which is thinner than the standard F3.3mm, and it is possible to reduce friction and enhance the shock absorption effect. Since the shaft surface is coated with titanium,...
CHF 23.50
En stock  
+ −
Aluminum Servo Mount BD9/BD10
YOK-B9-203BA
entspricht: B9-203B
CHF 37.90
En stock  
+ −
Front inner suspension pin
YOK-B2-009BFA
entspricht: B2-009BF
CHF 5.50
En stock  
+ −
Lower Bulkhead (A) BD9/BD10
YOK-B9-32LA19A
(F Left /R Right)
CHF 37.90
En stock  
+ −
Team Yokomo compact nylon tool bag
YOK-YT-YTBA
A tool bag finished with durable nylon fabric and careful sewing. The main storage compartment is double zip type which makes easy to open or close the bag. The back of the lid has a compartment pocket for storing tools and a zipper pocket for storing thin items. The main compartment allows...
CHF 37.90
En stock  
+ −
Center Gear Giff.Assembbly for B-YZ4SF
YOK-S4-504
CHF 74.90
En stock  
+ −
Verfügbarkeit
Verfügbar beim Lieferanten
Abmessungen
Auswahlhilfe
Material
Prix
CHF
–
CHF
  • CHF 1.5
  • CHF 849
Reifen/Rad-Typ
Servo-Typ
Verwendung
Massstab
Motor / Antrieb
Einsatz
Anspruch
Lackierung
Fertigungsgrad
Max. Geschwindigkeit
Marke
Betriebsspannung