ERSATZTEIL-FINDER

Yokomo

Ordnen nach:
Empfohlen
48
Alu Shim 3x6x6 (Black, 8pcs)
YOK-ZC-A3660B
These aluminum spacers are even thicker than conventional ones. Even when the same thickness is used, it provides greater strength and precision than stacking multiple pieces. They are available in three thicknesses ranging from 4 mm to 6 mm, each containing 8 pieces.
CHF5.90
Auf Lager  
+ −
Graphite Lightweight front lower suspension Arm
YOK-B12-008FR
Graphite Lightweight front lower suspension arm (right) +0.5mm for BD12/11 This lightweight graphite suspension arm has been made lighter than before by changing the cut line, and has further improved maneuverability and traction. Compared to the standard suspension arm of the BD12, it is...
CHF36.90
Auf Lager  
+ −
Titanium Turnbuckle 65mm (2pcs)
YOK-ZC-TB65T
This Turnbuckle can be titaniumized to fit each car. The Weight of the rod is reduced, which is effective in improving driving performance.
CHF12.80
Auf Lager  
+ −
Titanium Turnbuckle 75mm (1pcs)
YOK-ZC-TB75T
This Turnbuckle can be titaniumized to fit each car. The Weight of the rod is reduced, which is effective in improving driving performance.
CHF14.80
Auf Lager  
+ −
Turnbuckle Upper Arm Rod End for MS1.0
YOK-MS-008TR
This is a replacement plastic part for the turnbuckle upper arm, an optional part for MS1.0
CHF9.90
Auf Lager  
+ −
O-Ring for YZ-870C Shock Cap 2mm (8pcs)
YOK-YS-7B2
O-rings for drain screws used on aluminum shock caps for YZ-870C.The inner diameter is F2mm and comes in packs of 8.
CHF3.40
Auf Lager  
+ −
Steel M3 Flanged Lock Nut (4pcs)
YOK-ZC-N3FLS
A 3mm steel flange nut. The back of the flange has a serrated groove, allowing you to securely lock plastic parts. Pack of 4.
CHF3.40
Auf Lager  
+ −
M2x6mm Button Head Screw (10pcs)
YOK-ZC-BH26A
M2x6mm button head screw (f4.2 head, pack of 10)
CHF4.60
Auf Lager  
+ −
Aluminum Anti-Roll Bar Ball (Hard/2pcs)
YOK-ZC-206AHA
Aluminum ball studs for use with stabilizers, etc. The surface is hard anodized for high durability. Pack of 2.
CHF6.80
Auf Lager  
+ −
"X30" 13 Shock Body (Front) for SO2.0/MO2.0
YOK-S4-S4S13
This is an aluminum small size cylinder for F13mm big bore shocks. Pack of 1.
CHF12.50
Auf Lager  
+ −
"X30" 13 Shock Body (Rear/Short) for SO2.0/MO2.0
YOK-S4-S4M13
This is an aluminum M-size cylinder for F13mm big bore shocks. 1 piece included.
CHF12.50
Auf Lager  
+ −
"X30" Shock Body (Rear) for MO1.0
YOK-S4-S4L13
This is an aluminum large size cylinder for a F13mm big bore shock absorber that fits the rear of the MO1.0. 1 piece included.
CHF12.50
Auf Lager  
+ −
Aluminum motor mount for YZ-2T
YOK-Z2-304TA
This is an aluminum motor mount for the YZ-2T 2WD racing truck. It is black anodized with beveled edges.
CHF29.90
Auf Lager  
+ −
Molded Main Chassis for RO1.0
YOK-Z2-002RO
This is the standard main chassis for the RO1.0. It is a one-piece resin main chassis that provides moderate flexibility to improve driving stability.
CHF32.50
Auf Lager  
+ −
Aluminum Steering Bell Crank Set for RO1.0/SO1.0
YOK-Z2-201SBA
This is an aluminum bell crank set that gives the RO1.0/SO1.0 steering even sharper.
CHF74.90
Nicht auf Lager
Tungsten 3/32 balls for differential (14 pieces)
YOK-Z2-505TA
These are ultra-high-precision tungsten carbide differential balls. The precision of the ball surface improves the smooth operation of the differential and makes it highly wear-resistant. This product comes in a pack of 14, perfect for the Z2-500 ball differential used on the YZ-2 and YZ-4.
CHF12.80
Auf Lager  
+ −
Molded Shock Towers for RO1.0
YOK-Z2-017S
Standard shock tower for RO1.0. Front and rear set.
CHF11.40
Auf Lager  
+ −
Rear Hub Carrier for RO1.0
YOK-Z2-415R1
This is a standard plastic rear hub carrier for the RO1.0. It comes in a set of two, with the same shape for the left and right.
CHF10.30
Auf Lager  
+ −
Clear Lexan Body for RO1.0
YOK-Z2-101RO
This is the standard RO1.0 polycarbonate body. To use, please cut off the excess and paint it with polycarbonate paint. *The photo is an example of how to paint the model. The product is made of clear polycarbonate, so please prepare a dedicated spray paint separately. *Window masking...
CHF23.10
Auf Lager  
+ −
Light Unit Plastic Parts (ORC Z33)
YOK-SD-Z33LA
CHF7.10
Auf Lager  
+ −
F.shock body
YOK-YS-4S-8
CHF13.90
Auf Lager  
+ −
R. Shock Body
YOK-YS-4L-8
CHF14.50
Auf Lager  
+ −
Graphite Rear Chassis (2.4mm) for SD2.0
YOK-Y2-002S2R
CHF27.90
Auf Lager  
+ −
Aluminum Chassis Bridge for SD2.0
YOK-Y2-002SDB
CHF24.90
Auf Lager  
+ −
Graphite Rear Upper Deck (2,4mm) for SD2.0
YOK-Y2-003SDR
CHF22.90
Auf Lager  
+ −
Aluminum Bellcrank Arm Lower Adaptor for SD2.0
YOK-Y2-200L
CHF18.90
Auf Lager  
+ −
Graphite Bellcrank Arm Plate (3.0mm) for SD2.0
YOK-Y2-200P
CHF16.90
Auf Lager  
+ −
Bellcrank Arm Upper Adaptor for SD2.0
YOK-Y2-200U
CHF23.90
Auf Lager  
+ −
Bellcrank Arm Mount Post for SD2.0
YOK-Y2-201P
CHF6.90
Auf Lager  
+ −
Aluminum Upper Deck Post
YOK-Y2-303AP
CHF28.90
Auf Lager  
+ −
Aluminum Motor Mount for SD2.0
YOK-Y2-304SD2
CHF32.90
Auf Lager  
+ −
Kugellager 4x11x4 2stk.
YOK-BB-1140-2
CHF8.90
Auf Lager  
+ −
Aluminum Rear Bulkhead Backplate
YOK-Y2-302ABP
CHF45.90
Auf Lager  
+ −
Steering Block & Rear Hub Carrier for SD2.0
YOK-Y2-415FR
CHF15.90
Auf Lager  
+ −
AlumOut Drive Cup of Gear Diff for YD-2
YOK-Y2-501GSAA
entspricht: Y2-501GSA
CHF13.70
Nicht auf Lager
4.0f"E"Clips (10pcs.)
YOK-ZC-411A
entspricht: ZC-411
CHF2.30
Auf Lager  
+ −
YOKOMO Factory T-Shirt 2XL size
YOK-ZC-T272XLA
entspricht: ZC-T272XL
CHF27.40
Auf Lager  
+ −
Rear Wheel for GT1
YOK-GT1-40R01
CHF6.80
Auf Lager  
+ −
Brass Motor Slit Balance Weight 3.6g
YOK-MS-BWM
This is a brass weight that is attached to the groove on the opposite side of the motor slit, located on the MS1.0 main chassis to equalize the left and right rigidity. It weighs 3.6g and contributes to left-right balance adjustment.
CHF13.70
Auf Lager  
+ −
Brass Rear Balanse Weight 5g for MS1.0
YOK-MS-BWR5
This brass weight can be installed on the front side of the rear bulk of the MS1.0. Its shape avoids interference with the rear belt and reduces the joint area with the chassis so that it does not affect the flex of the chassis.
CHF13.70
Auf Lager  
+ −
Yokomo Shock Oil Stand for Multi Bag
YOK-YT-YSS
This stand storage item can hold bottles of shock oil, differential oil, etc. It can hold bottles up to 29mm in diameter, preventing oil leakage due to tipping over. It is also sized to be easily combined with the Yokomo Multi Bag and can be used as a special case for storing oil and chemicals...
CHF13.70
Auf Lager  
+ −
Radial Rubber Tire Hard for GT1
YOK-GT1-39H
CHF12.80
Auf Lager  
+ −
Radial Rubber Tire Medium for GT1
YOK-GT1-39M
CHF12.80
Auf Lager  
+ −
Steel Gear Diff Drive Cup (Bearing type/1pcs.)
YOK-MS-501GS
CHF12.80
Nicht auf Lager
Steel Spool Drive Cup (Bearing type/1pcs.)
YOK-MS-501MCS
CHF12.80
Nicht auf Lager
f5.0 Preci.itan.King Pin Ball 10.3mm(4pcs.)
YOK-RP-117
High-precision titanium king pin balls for use on the upper and lower steering block of the MS1.0. The weight reduction improves machine response, and the ball height is 1mm higher than the kit's standard one, allowing the roll center to be changed for even better grip.
CHF13.70
Auf Lager  
+ −
Graphite Front Shock Tower (3mm) for RS1.0
YOK-RS-017SG
CHF13.70
Auf Lager  
+ −
Alum. Rear Body Post Mount for MS1.0
YOK-MS-016MA
Aluminum rear body post mount for MS1.0. Converts the standard rearward post into a vertical one, directly receiving downforce and enabling mounting of bodies with long rear overhangs, scale bodies, etc
CHF15.40
Auf Lager  
+ −
Verfügbarkeit
Verfügbar beim Lieferanten
Abmessungen
Auswahlhilfe
Material
Preis

CHF  –  CHF

  • ‎CHF1.5
  • ‎CHF949
Reifen/Rad-Typ
Servo-Typ
Verwendung
Massstab
Motor / Antrieb
Einsatz
Anspruch
Lackierung
Fertigungsgrad
Max. Geschwindigkeit
Marke
Betriebsspannung
Zurücksetzen (reset)