Français (CH)
ERSATZTEIL-FINDER

Yokomo

Recommandés
96 Par page
Aluminum Flexible Rear Bulk Head Set
YOK-GT-20FS
 
CHF 59.90
En stock  
+ −
Heavy Duty Gokuraku OR Wing narrow
YOK-ZS-GWBNHA
entspricht: ZS-GWBNH
CHF 14.90
En stock  
+ −
BD7-2016 Hard Main Chassis
YOK-B7-00216H
 
CHF 99.00
En stock  
+ −
Rear suspension mount (front-side)
YOK-Z2-300RF
 
CHF 32.50
En stock  
+ −
Aluminum adjustable rear H arm kit for YD-2/YD-4
YOK-Y2-008RAA
This all new rear H arm has made by aluminum with our original high precision processing to enable the driver to make an adjustment for chassis tread for finding out the best chassis balance and also suites for the variety of car bodies width as well.   Adjustable length for each...
CHF 95.00
En stock  
+ −
High Precision Cutting Titanium Screw Set SO3.0
YOK-RP-118
This titanium screw set is designed to fit the SO3.0 chassis configuration. The set includes 106 screws for one car.
CHF 145.90
En stock  
+ −
Alu main Chassis hard anodized YZ4-SF
YOK-S4-002SA
entspricht: S4-002S
CHF 95.00
En stock  
+ −
Aluminum Chassis SO3.0
YOK-SO-002
CHF 94.90
En stock  
+ −
Aluminum ball diff kit for YD-2 series
YOK-Y2-500AA
entspricht: Y2-500A
CHF 34.90
Rupture de stock
Karosserie Mercury Sayaka Spl. S15 Drift 1:10 klar
YOK-SD-MS15B
The MERCURY SAYAKA SPECIAL S15 driven by popular ladies driver Sayaka Shimoda is now available as a body for drifting! The wide form with powerful over fenders and the GT wing with aluminum stays create a racing atmosphere
MaterialLexan Auswahlhilfe190mm Touring Massstab1:10 EinsatzOn-Road Drift Lackierungunlackiert
CHF 89.90
En stock  
+ −
BL-RPX2 Competition ESC (Purple) for Drift
YOK-BL-RPX2DP
VerwendungRC Auto Motor / AntriebElektro Brushless-Motor HerstellerYokomo
CHF 259.90
En stock  
+ −
BL-RPX2 Competition ESC (Red) for Drift
YOK-BL-RPX2DR
VerwendungRC Auto Motor / AntriebElektro Brushless-Motor HerstellerYokomo
CHF 259.90
En stock  
+ −
HD f5.5mm Ball end cap for YZ-2/YZ-4
YOK-Z2-206DM2A
entspricht: Z2-206DM2
CHF 9.90
En stock  
+ −
Aluminum Gear Differential Case (with 38T pulley)
YOK-MS-503GHA
Used in place of the standard plastic gear diff case, this aluminum diff case increases diff oil heat dissipation and stabilizes operating effectiveness. Especially during the summer season, it can prevent oversteer due to low differential oil viscosity and stabilize lap times. The pulley part is...
CHF 64.90
En stock  
+ −
Alu Rear Susp. Mount Spacer Set (for rear side)
YOK-Z4-300RRS
 
CHF 18.50
En stock  
+ −
Aluminum cramp servo horn 17mm (for FUTABA)
YOK-ZC-204517A
entspricht: ZC-204517
CHF 17.90
En stock  
+ −
Yokomo Pit Bag S
YOK-YT-30
This pit bag conveniently stores your drift or speed car, transmitter, charger, and parts in one place. It features a handle and an adjustable shoulder strap for easy carrying, and its compact size makes transporting it to the circuit easy. It is made from thick nylon fabric with sturdy...
CHF 129.00
En stock  
+ −
Pitching Control System BD8
YOK-B8-PCS
Yokomo are continually evolving the World Championship winning BD8 Platform
CHF 84.90
En stock  
+ −
Rear ESC Mount for YD-2 series
YOK-Y2-REMA
Please be informed that Introducing new ESC Rear mount option for our YD-2 series drift chassis. The final design is a result of extensive field testing by Team Yokomo drivers. It has the best balance between mounting position and weight distribution/transfer. The new option is a 2 piece...
CHF 42.90
En stock  
+ −
Brass Motor Mount for BD10
YOK-B10-302MBA
The new brass motor mount will increase the weight by 34g compare to the original aluminum unit. It will help to meet race ready weight regulations without upsetting the left/right balance weight distribution by centering the weight at the middle of the chassis.
CHF 84.90
En stock  
+ −
Aluminium Suspension Mount Set für RS1.0/RS2.0
YOK-RS-301AS
This aluminum suspension mount is commonly used for the RS series. The rear mount is basically designed to have the same width as the standard one, but the rear rear suspension toe angle can be changed by interchanging the two types of bushings. The kit standard (3 degree) bushing is the center...
CHF 84.90
En stock  
+ −
YC-1134 Parts Case Set
YOK-YC-1134A
Parts Case Set 255x190x60mm
CHF 28.90
En stock  
+ −
Alu Main Chassis BD8
YOK-B8-002A
 
CHF 125.90
En stock  
+ −
Team Yokomo Rookie Off-Road 2WD Buggy 1:10 Bausatz
YOK-ROR-010
We are pleased to announce the release of the new RO1.0 chassis kit, ideal for beginners and intermediate off-road racers. The kit is reasonably priced and comes with pre-assembled dampers, turnbuckle tie rods, etc., as well as a pre-cut body for easy assembly. The body is also pre-cut for...
Massstab1:10 Motor / AntriebElektro Brushless-Motor, Elektro Bürstenmotor EinsatzOff-Road AnspruchAnfänger/Einsteiger FertigungsgradBausatz
CHF 249.90
En stock  
+ −
Alu Rear Brace with Cooling Fan YD-2
YOK-Y2-303RBFA
entspricht: Y2-303RBF
CHF 54.90
En stock  
+ −
Optional parts set for YD-2 series Upgrade 4
YOK-Y2-OP4A
By increasing the rigidity of the shock tower, the suspension will move even better. Considering the lightweight finish on the front side, we chose a graphite hybrid shock tower and a lightweight integrated bulkhead.
CHF 124.90
En stock  
+ −
Aluminum Main Chassis U.S. Version BD11
YOK-B11-002AU
BD11US specification aluminum main chassis. By not removing meat, it increases rigidity, promotes a low center of gravity, and is suitable for high-grip road surfaces.
CHF 124.90
En stock  
+ −
Universal Shaft 68mm Bone DTM2
YOK-Z2-01068A
entspricht: Z2-01068
CHF 34.90
En stock  
+ −
Main Drive Shaft graphite YD-4
YOK-Y4-644G
 
CHF 41.50
En stock  
+ −
Competition Brushless ESC RPX4
YOK-BL-RPX4
The ultimate speed controller, which exceeds the power of the RPX2 and the ease of handling of the RPX3, is now available in an updated version! The state-of-the-art power MOS FETs have been rigorously tested in racing environments. It maximises the performance of stock motors and allows the...
CHF 249.00
En stock  
+ −
YZ-2 F2 light-Weight Body (with Masking)
YOK-Z2-DTMWBA
entspricht: Z2-DTMWB
MaterialLexan AuswahlhilfeBuggy Massstab1:10 EinsatzOff-Road Lackierungunlackiert
CHF 24.90
En stock  
+ −
Aluminum rear hub carrier for YZ-4SF2
YOK-S4-415RS2A
Aluminum rear hub carrier compatible with the sturdy F3mm outer suspension arm pin. Four types of bushes for passing suspension pin are attached, and the height can be adjusted in 7 steps by switching the height. Also, it also has the effect of increasing rear traction due to rise of...
CHF 82.90
En stock  
+ −
Alu front upper A arm holder rear YD4
YOK-Y4-302UR
 
CHF 34.90
En stock  
+ −
Aluminum front short A arm set for YD-2 (Red/Bevel
YOK-Y2-R08FSCA
entspricht: Y2-R08FSC
CHF 69.90
Rupture de stock
Aluminum Adj. Suspension Mount Set Purple RD2.0
YOK-RD-301ASP
CHF 79.90
En stock  
+ −
Aluminum Lower Bulkhead Set RS1.0/RS2.0
YOK-RS-32ALS
Aluminum lower bulkhead for RS1.0/2.0. It is anodized in blue, the optional image color of the RS series, and is very effective in improving the looks of the machine. Can be combined with optional stabilizer.
CHF 79.90
En stock  
+ −
Alu Steering Hub Carrier YZ-2
YOK-Z2-413A
 
CHF 59.90
En stock  
+ −
Drift Package 2WD Pandem GR86 Kit (White)
YOK-DP-GR86W
This is a kit with pre-painted body of the Drift Package 2WD based on the RD2.0. By pre-painting and cutting the body, which can be difficult for beginners, the kit production time and effort is greatly reduced, allowing you to enjoy the fun of chassis assembly while also making it easier to...
CHF 239.00
En stock  
+ −
Drift Package 2WD Pandem GR Supra Kit (Red)
YOK-DP-GRA90R
This is a kit with pre-painted body of the Drift Package 2WD based on the RD2.0. By pre-painting and cutting the body, which can be difficult for beginners, the kit production time and effort is greatly reduced, allowing you to enjoy the fun of chassis assembly while also making it easier to...
CHF 239.00
En stock  
+ −
Front Double Joint Universal Driveshaft BD9/BD10
YOK-B9-010FWA
entspricht: B9-010FW
CHF 59.90
En stock  
+ −
Nouveau
Drift Package Pandem RZ34 Kit rot Pre-Cut 1:10
YOK-DP-RZ34R
Dies ist ein Baukasten mit Karosserie für ein 2WD-Drift-Package auf Basis des RD2.0. Die markant gestaltete PANDEM NISSAN Fairlady Z (RZ34) ist wahlweise als klare Karosserie oder bereits vorlackiert (rot/blau) erhältlich. Die PANDEM-Aerodynamikteile unterstreichen zusätzlich die imposante...
Massstab1:10 Motor / AntriebElektro Bürstenmotor EinsatzOn-Road Drift AnspruchAnfänger/Einsteiger FertigungsgradBausatz
CHF 239.00
En stock  
+ −
Graphite Main Chassis YD-4
YOK-Y4-002
 
CHF 119.00
En stock  
+ −
Yokomo Transmitter Bag V2
YOK-YT-27TB2A
Yokomo's new propo bag has been redesigned! The design has been changed to the Racing Factory logo, and it is a propo bag with cushioning to protect your precious radio from shocks when traveling to the RC circuit. The image of the bag is the same as that of the pit bag, and the total...
CHF 55.90
En stock  
+ −
BD8/BD7'16 Rear Toe Control system kit (ARS)
YOK-B8-RTC
CHF 57.90
En stock  
+ −
YD-2Z Front Upgrade Set schwarz
YOK-Y2-FUSBA
A new parts set to easily upgrade your YD-2Z chassis! This upgrade set balances front end weight reduction with increased precision and sharp looks at a very competitive price. The front shock towers have aluminum upper arm holders for high precision, and graphite shock mountings for...
CHF 115.00
En stock  
+ −
Front bulk head for YZ-2T
YOK-Z2-002BTA
entspricht: Z2-002BT
CHF 9.50
En stock  
+ −
Aluminium Rear Susp. Mount (Rear/L5 Arm) YZ-4
YOK-Z4-300LRR
 
CHF 32.50
En stock  
+ −
3gear idler gear für CA
YOK-Z2-503ICA
entspricht: Z2-503IC
CHF 6.90
En stock  
+ −
YD-4 MR Conversion kit
YOK-DP-YD4MRC
*** Nur Umbausatz. Sie benötigen ein normales YD-4, um dieses zu YD-4 MR Spec zu konvertieren. ***
Massstab1:10 Motor / AntriebElektro Brushless-Motor EinsatzOn-Road Drift AnspruchAnfänger/Einsteiger FertigungsgradBausatz
CHF 225.00
En stock  
+ −
Front upper arm mount ”S” (Standard) for YZ-2 seri
YOK-Z2-300FUSA
entspricht: Z2-300FUS
CHF 25.90
En stock  
+ −
Differenzialgehäuse mit 42T Pulley MS2.0
YOK-MS-503GH-2
CHF 74.90
En stock  
+ −
Sway Bar Set RS2.0 (Only Aluminum Bulkhead)
YOK-RS-412AS
These stabilizers can be mounted on RS2.0 aluminum lower bulkheads. The set comes with three different bars, front and rear, each with ball bearing support for smooth operation and increased stabilizing effect.
CHF 55.90
En stock  
+ −
Alu Offset Rear Hub Carrier 0 degree Set YZ4/Z2ca
YOK-Z2-415RS
This is intended for the variable set up for upper arm by replacement for several kind of track surface.
CHF 89.90
En stock  
+ −
Alu Front upper A arm holder legt YD-4
YOK-Y4-302UHL
 
CHF 31.90
En stock  
+ −
Alu Front upper A arm holder right YD-4
YOK-Y4-302UHR
 
CHF 31.90
En stock  
+ −
Ceramic Kugellager 10x15x4mm 2stk.
YOK-BB-1510CBA
entspricht: BB-1510CB
CHF 16.90
En stock  
+ −
BD7-2016 High Traction Graphite Main Chassis
YOK-B7-00216S
High Traction Graphite Main Chassis (Increase Traction)
CHF 109.90
En stock  
+ −
Graphite main chassis (Hard) for BD9
YOK-B9-00219H
A new hard main chassis for the BD9 is now available!
CHF 109.90
En stock  
+ −
Type B, Front suspension arm
YOK-Z2-008F3A
F3 Outer pin spec
CHF 11.00
En stock  
+ −
Optional parts set for YD-2 series Upgrade 2
YOK-Y2-OP2A
Axles and bearings that lightly finish the rotation of the tire. It is possible to prevent spin by improving the running of the front. In addition, the variable kingpin angle steering block provides optimal wheel alignment for drift driving.
CHF 109.90
En stock  
+ −
Drift Package 2WD Pandem GR86 Kit (Clear)
YOK-DP-GR86
The famous "DRIFT PACKAGE", the pioneer of drift RC cars and synonymous with drift RC cars, is back in 2WD form! Based on a conventional assembly kit, this reasonably priced package includes a clear body and tires/wheels. If you purchase the steering gyro and running set, you can enjoy...
CHF 219.00
En stock  
+ −
Drift competition tire for carpet/P-tile DRC 4stk.
YOK-ZR-DRCA
For Carpet/Polished Tile These HDPE tires have a flatter surface compared to the asphalt variant. By increasing the contact patch these tires let you drift on carpet/polished tile with an increased sense of grip and driving performance
Auswahlhilfe200mm Touring, 190mm Touring MaterialDrift Reifen/Rad-TypReifen Massstab1:10 EinsatzOn-Road Drift
CHF 11.00
En stock  
+ −
Upper Arm Mount Rear YZ-4
YOK-Z4-300RU
 
CHF 9.90
En stock  
+ −
Front Suspension Arm (Graphite)Flat +1? long YZ-4
YOK-Z4-008F1
 
CHF 13.50
En stock  
+ −
Front Lower Short A Arm YD2 YD4
YOK-Y2-008FSCA
Yokomo will release a new optional parts [Front lower short A arm] for more freedom on counter steering for existing customer who enjoy AWD and RWD drifting with YD-4 & YD-2 series in the end of this month, May 31st. Short Suspension Arm will be a kind of highlight at all the option...
CHF 64.90
En stock  
+ −
Rear Belt 103T YZ-4
YOK-Z4-309-8
CHF 17.90
En stock  
+ −
Hard main chassis (Short type)
YOK-Z2-002DA
For Dirt track
CHF 105.00
En stock  
+ −
Alu 15.5mm clamp Servo Horn 25T Futaba
YOK-Z2-20425A
entspricht: Z2-20425
CHF 16.90
En stock  
+ −
Alu Conversion Kit für Yokomo SD
HSH-YOK-ALUCONV
Alu Conversion Kit für Yokomo SD Aluminium blau, inkl. Kugellager
CHF 69.90
En stock  
+ −
"Teams" Light weight FLEX Chassis Set für YD-2
YOK-Y2-002TSA
Team Yokomo's competition drift brand, Teams, is proud to announce the release of the new light weight flex chassis set for the YD-2 series. The lightweight graphite main chassis plate and special lightweight battery holder provide the right amount of rigidity and traction for a more...
CHF 209.00
En stock  
+ −
Alu adjustable steering bell crunk set for YD-2
YOK-Y2-202VA
It is a variable aluminum steering bell crank that can be used in common with the YD - 2 series. Corresponding to the wide tread of the front which is the mainstream of recent RWD drift, we set the width of the tie rod pivot part of the center link right and left, and widely set the...
CHF 99.90
En stock  
+ −
Motor Mount
YOK-B9-302MA
entspricht: B9-302M
CHF 49.50
En stock  
+ −
RTC Separate Suspension mount (B)
YOK-B9-RTC-05A
entspricht: B9-RTC-05
CHF 32.90
En stock  
+ −
Plastic Bevel Gear Dif Assy (with Aluminum Drive c
YOK-Y2-500GSAA
entspricht: Y2-500GSA
CHF 49.90
Rupture de stock
BD10F Front balance weight L / R 40g
YOK-B10-BWF40A
A front balance weight that enhances the traction of the BD10F. A total weight increase of 80g can be achieved with 40g each on the left and right, reducing wheel spin that tends to occur during acceleration. The acceleration from the corner will be improved and the time will be improved. By...
CHF 65.00
En stock  
+ −
Front double-joint universal BD11
YOK-B11-010FWA
entspricht: B11-010FW
CHF 64.90
En stock  
+ −
YZ-2 Alu Bell Crank Base
YOK-Z2-201BB3A
entspricht: Z2-201BB3
CHF 21.50
En stock  
+ −
Alu Front upper A Arm YD-4
YOK-Y4-008FUC
 
CHF 47.90
En stock  
+ −
Aluminum main chassis for YZ-2T
YOK-Z2-002TA
entspricht: Z2-002T
CHF 95.00
En stock  
+ −
Carbon Graphite Main Chassis
YOK-B9-00219
CHF 95.00
En stock  
+ −
Lexanschere / Lexan Schere
YOK-YT-CS2A
entspricht: YT-CS2
CHF 15.90
En stock  
+ −
Narrow Graphite Main Chassis Set für YD-2R inline
YOK-Y2-002RXVA
This graphite chassis set is designed to further fine tune the YD-2R series for high rear traction. The overall silhouette has been slimmed down and rebalanced for rigidity, and the chassis has also been lightened for a more supple chassis twist. The roll motion softens the load on the...
CHF 189.90
En stock  
+ −
Alu main Chassis (Midship) YZ CAL2 / DTM2S
YOK-Z2-0023
CHF 94.90
En stock  
+ −
Gear Diff. Case (High capacity) CAL2
YOK-Z2-503GH2A
entspricht: Z2-503GH2
CHF 11.50
En stock  
+ −
Front HD Double Joint Univ. Shaft
YOK-B7-010FW
 
CHF 62.90
En stock  
+ −
Lexanschere / Lexan Schere 160mm
YOK-YT-CS1A
Lexanschere Fluorine processing Scissor 160mm
CHF 16.90
En stock  
+ −
Karosserie Toyo S15 Silvia klar
YOK-SD-TY15BB
MaterialLexan Auswahlhilfe190mm Touring Massstab1:10 EinsatzOn-Road Drift Lackierungunlackiert
CHF 62.90
En stock  
+ −
Alum. Short Shock Conversion Set for RS1.0
YOK-RS-SSC
New Short Shock Conversion Kit is now available to further improve the performance of the RookieSpeed RS1.0 to racing specs. This set of carbon shock towers and aluminum short shocks provide a sharp ride with minimal roll. The shock length has been shortened by more than 7mm to achieve an...
CHF 94.10
En stock  
+ −
“X30” 13 shock set (front)
YOK-S4-S1S13
This is a F13mm big bore shock set. The S size is ideal for the front of the SO/MO series, and the shaft diameter is 3.0mm.
CHF 62.90
En stock  
+ −
Graphite molded S3/LD rear sus-arm YZ2-DTM/CAL
YOK-Z2-008R3GA
For YZ-2 DTM/CAL 3/3.1
CHF 16.90
En stock  
+ −
Graphite Rear Shock Tower YD-4
YOK-Y4-018
 
CHF 22.90
En stock  
+ −
Karosserie Extrem PS13 SILVIA 1:10
YOK-SD-PS13BA
entspricht: SD-PS13B
MaterialLexan Auswahlhilfe190mm Touring Massstab1:10 EinsatzOn-Road Drift Lackierungunlackiert
CHF 46.90
En stock  
+ −
Main Chassis YZ-2
YOK-Z2-002
 
CHF 89.90
En stock  
+ −
Aluminum main chassis for BD10
YOK-B10-002AA
Aluminum main chassis for BD10. It is heavier than graphite and can lower its center of gravity. It is especially effective for high grip situations such as carpet surfaces.
CHF 124.90
En stock  
+ −
SLF Aluminum Big Bore shock set for YD-2
YOK-Y2-SBBSA
Super low friction aluminum big bore shock set for YD-2. The cylinder diameter is wider than the conventional shock, and the shock length is also newly designed for drifting. The maximum capacity for on-road shocks enhances the sense of stability. The cylinder is also treated with Kashima Coat...
CHF 89.90
En stock  
+ −
Rear C Clip Universal BD9/BD10
YOK-B9-010RAA
(44.5mm Aluminum bone)
CHF 49.90
En stock  
+ −
Verfügbarkeit
Verfügbar beim Lieferanten
Abmessungen
Auswahlhilfe
Material
Prix
CHF
–
CHF
  • CHF 1.5
  • CHF 849
Reifen/Rad-Typ
Servo-Typ
Verwendung
Massstab
Motor / Antrieb
Einsatz
Anspruch
Lackierung
Fertigungsgrad
Max. Geschwindigkeit
Marke
Betriebsspannung