ERSATZTEIL-FINDER

Yokomo

Ordnen nach:
Empfohlen
96
Graphite Steering Block Arm L (2.4mm)
YOK-B12-RTC-5L
Graphite arm plate with an extended tie rod mounting position compared to the RTC standard arm to reduce toe-in change during suspension stroke. It improves turning performance especially on high grip surfaces.
CHF11.90
Auf Lager  
+ −
Yokomo Off-Road 13mm Feder DOT8 (6.25t) 2stk.
YOK-YS-12625F
These springs are compatible with the F13mm high-capacity shocks adopted from the SO2.0 off-road car. The hardness of the spring is laser-engraved according to the number of turns the higher the number of DOT, the harder the spring. There are 5 types of front releases and 4 types of...
CHF9.90
Auf Lager  
+ −
Yokomo Off-Road 13mm Feder DOT7 (6.50t) 2stk.
YOK-YS-12650F
These springs are compatible with the F13mm high-capacity shocks adopted from the SO2.0 off-road car. The hardness of the spring is laser-engraved according to the number of turns the higher the number of DOT, the harder the spring. There are 5 types of front releases and 4 types of...
CHF9.90
Auf Lager  
+ −
Yokomo Off-Road 13mm Feder DOT6 (6.75t) 2stk.
YOK-YS12675F
These springs are compatible with the F13mm high-capacity shocks adopted from the SO2.0 off-road car. The hardness of the spring is laser-engraved according to the number of turns the higher the number of DOT, the harder the spring. There are 5 types of front releases and 4 types of...
CHF9.90
Auf Lager  
+ −
Yokomo Off-Road 13mm Feder DOT5 (7.00t) 2stk.
YOK-YS-12700F
These springs are compatible with the F13mm high-capacity shocks adopted from the SO2.0 off-road car. The hardness of the spring is laser-engraved according to the number of turns the higher the number of DOT, the harder the spring. There are 5 types of front releases and 4 types of...
CHF9.90
Auf Lager  
+ −
Yokomo Off-Road 13mm Feder DOT4 (7.25t) 2stk.
YOK-YS-12725F
These springs are compatible with the F13mm high-capacity shocks adopted from the SO2.0 off-road car. The hardness of the spring is laser-engraved according to the number of turns the higher the number of DOT, the harder the spring. There are 5 types of front releases and 4 types of...
CHF9.90
Auf Lager  
+ −
Yokomo Off-Road 13mm Feder DOT6 (10.0t) 2stk.
YOK-YS-12100R
These springs are compatible with the F13mm high-capacity shocks adopted from the SO2.0 off-road car. The hardness of the spring is laser-engraved according to the number of turns the higher the number of DOT, the harder the spring. There are 5 types of front releases and 4 types of...
CHF9.90
Auf Lager  
+ −
Yokomo Off-Road 13mm Feder DOT5 (10.5t) 2stk.
YOK-YS-12105R
These springs are compatible with the F13mm high-capacity shocks adopted from the SO2.0 off-road car. The hardness of the spring is laser-engraved according to the number of turns the higher the number of DOT, the harder the spring. There are 5 types of front releases and 4 types of...
CHF9.90
Auf Lager  
+ −
Yokomo Off-Road 13mm Feder DOT4 (11.0t) 2stk.
YOK-YS-12110R
These springs are compatible with the F13mm high-capacity shocks adopted from the SO2.0 off-road car. The hardness of the spring is laser-engraved according to the number of turns the higher the number of DOT, the harder the spring. There are 5 types of front releases and 4 types of...
CHF9.90
Auf Lager  
+ −
Yokomo Off-Road 13mm Feder DOT3 (11.5t) 2stk.
YOK-YS-12115R
These springs are compatible with the F13mm high-capacity shocks adopted from the SO2.0 off-road car. The hardness of the spring is laser-engraved according to the number of turns the higher the number of DOT, the harder the spring. There are 5 types of front releases and 4 types of...
CHF9.90
Auf Lager  
+ −
Front Sus_arm L/R for MO Series
YOK-MO-008F
CHF10.90
Auf Lager  
+ −
Center Bone 100mm for MO2.0
YOK-MO-010B10
CHF8.50
Nicht auf Lager
Center Bone 51mm for MO2.0
YOK-MO-010B51
CHF8.50
Auf Lager  
+ −
Center Bone 67mm for MO2.0
YOK-MO-010B67
CHF8.50
Auf Lager  
+ −
Graphite Front Shock Tower for MO Series
YOK-MO-017
CHF18.90
Auf Lager  
+ −
Graphite Rear Shock Tower for MO Series
YOK-MO-018
CHF22.90
Nicht auf Lager
Graphite Battery Plate for MO2.0
YOK-MO-118P
CHF6.90
Auf Lager  
+ −
Graphite Servo Mount Plate for MO2.0
YOK-MO-203P
CHF9.90
Auf Lager  
+ −
Alum.Center Mount for MO2.0
YOK-MO-302CM
CHF21.50
Auf Lager  
+ −
Slipper Nuts/Spring for MO2.0
YOK-MO-303AJ
CHF8.90
Auf Lager  
+ −
Center Diff. Bearing Collar for MO2.0
YOK-MO-303BC
CHF4.90
Nicht auf Lager
Front Drive Plate for MO2.0
YOK-MO-303DP
CHF7.90
Auf Lager  
+ −
Main Drive Shaft for MO2.0
YOK-MO-303MS
CHF8.90
Auf Lager  
+ −
Slipper Outer Plate for MO2.0
YOK-MO-303OP
CHF8.90
Auf Lager  
+ −
Graphite Center Mount Plate for MO2.0
YOK-MO-304CP
CHF10.90
Auf Lager  
+ −
Graph.Steering Block Plate DOT1 for MO Series
YOK-MO-415P1
CHF11.90
Auf Lager  
+ −
COL Adjusting Screw Set for MO2.0
YOK-MO-303AJS
CHF4.90
Auf Lager  
+ −
f12xf18x4mm Ball Bearing (2 pcs.)
YOK-BB-1812-2
CHF9.90
Auf Lager  
+ −
Front Steering Hub Carrier
YOK-B12-413
CHF10.90
Auf Lager  
+ −
Battery Stopper
YOK-RS-118
CHF4.90
Auf Lager  
+ −
FRP F/R Upper Deck (2.0mm)
YOK-RS-003
CHF12.50
Auf Lager  
+ −
FRP Center Upper Deck (2.0mm)
YOK-RS-003B
CHF5.90
Auf Lager  
+ −
Aluminum Center Upper Deck Support
YOK-RS-003BP
CHF11.90
Auf Lager  
+ −
Aluminum Upper Deck Post
YOK-RS-003P
CHF5.20
Auf Lager  
+ −
Plastic Wheel Hub (4pcs)
YOK-RS-011H
CHF3.90
Auf Lager  
+ −
Plastic F/R Shock Tower
YOK-RS-017
CHF6.90
Auf Lager  
+ −
Bell Crank LR Center Link
YOK-RS-202
CHF7.90
Nicht auf Lager
Bell Crank Post (2pcs)
YOK-RS-202P
CHF6.90
Auf Lager  
+ −
Aluminum Servo Stay
YOK-RS-203A
CHF13.50
Auf Lager  
+ −
Aluminum Outer Servo Stay
YOK-RS-203P
CHF6.90
Auf Lager  
+ −
FRP Servo Stay Plate
YOK-RS-203PL
CHF6.90
Auf Lager  
+ −
Front/Rear Suspension Mount
YOK-RS-301
CHF7.90
Auf Lager  
+ −
Bulkhead A/B
YOK-RS-302
CHF6.90
Auf Lager  
+ −
Front/Rear Bulkhead Cap
YOK-RS-302C
CHF6.90
Auf Lager  
+ −
Aluminum Motor Plate
YOK-RS-302M
CHF16.90
Auf Lager  
+ −
117T F/R Drive Belt
YOK-RS-351L
CHF7.90
Auf Lager  
+ −
Joint Protector
YOK-RS-500DP
CHF4.90
Auf Lager  
+ −
Maintenance Kit for Gear Diff
YOK-RS-500GM
CHF7.90
Auf Lager  
+ −
Aluminum Gear Diff Drive Cup (4pcs)
YOK-RS-501GA
CHF16.90
Auf Lager  
+ −
Gear Diff Gasket
YOK-RS-501GG
CHF3.90
Auf Lager  
+ −
40T Diff Pully / Diff Case
YOK-RS-503GH
CHF7.90
Auf Lager  
+ −
Gear Diff Bevel Set
YOK-RS-503GP
CHF10.90
Auf Lager  
+ −
F/R Pully
YOK-RS-630
CHF4.90
Nicht auf Lager
Main Shaft
YOK-RS-644
CHF4.90
Auf Lager  
+ −
Plastic Belt Tension Cam (4pcs)
YOK-RS-BTC
CHF5.90
Auf Lager  
+ −
86T Spur Gear (DP48)
YOK-RS-SG4886
CHF5.90
Auf Lager  
+ −
F/R Shock Spring (4pcs)
YOK-YS-RSS
CHF8.90
Auf Lager  
+ −
M3x5mm FTHS Screw (4pcs)
YOK-ZC-FT35
CHF4.50
Auf Lager  
+ −
Yokomo Racing Tool Turnbuckle Wrench 4.0mm (Carbon
YOK-YT-TBWRA
This is a tool that makes it easier to turn the 4.0mm size turnbuckle used in Yokomo machines. The carbon handle has a red anodized accent, giving it a lacy look. This is an essential tool when setting camber and toe-in.
CHF18.90
Auf Lager  
+ −
Cooling fan mount for SO1.0/2.0/YZ-2
YOK-Z2-CFM
CHF22.90
Auf Lager  
+ −
Cooling fan mount for YZ-4SF
YOK-S4-CFMA
entspricht: S4-CFM
CHF24.50
Auf Lager  
+ −
Molded Suspension Parts Set for RO1.0
YOK-Z2-300RO
CHF15.90
Auf Lager  
+ −
Yokomo Esprit RPM Motor 27T
YOK-YM-ER27
In conjunction with the reissue of the Super Dogfighter, the Esprit RPM motor that was very active in the off-road scene in the 80's is also being revived! The pink labeling that recalls the image of Yokomo at the time has been perfectly reproduced, and of course, it is the perfect...
Motor / AntriebElektro Bürstenmotor HerstellerYokomo
CHF22.90
Auf Lager  
+ −
Horizontal Body Mount für BD12
YOK-B12-016HB
Compatible with rear body posts that protrude rearward, such as BD12, these mounting parts reliably receive downforce and increase rear traction. Compatible with Twister/Twister Special bodies, the mounting parts are secured to the body using the wing fixing screws. Offset can be...
CHF8.90
Auf Lager  
+ −
16mm Titanium Turn Buckle (2pcs)
YOK-ZC-TB16T
This special screw is manufactured with a reverse thread on one side of the screw at both ends, allowing the distance between parts at both ends to be adjusted when the screw is rotated in one direction. It is mainly used for upper arms and tie rods to facilitate adjustment of camber...
CHF8.90
Auf Lager  
+ −
18mm Titanium Turn Buckle (2pcs)
YOK-ZC-TB18T
This special screw is manufactured with a reverse thread on one side of the screw at both ends, allowing the distance between parts at both ends to be adjusted when the screw is rotated in one direction. It is mainly used for upper arms and tie rods to facilitate adjustment of camber...
CHF8.90
Auf Lager  
+ −
20mm Titanium Turn Buckle (2pcs)
YOK-ZC-TB20T
This special screw is manufactured with a reverse thread on one side of the screw at both ends, allowing the distance between parts at both ends to be adjusted when the screw is rotated in one direction. It is mainly used for upper arms and tie rods to facilitate adjustment of camber...
CHF9.90
Auf Lager  
+ −
25mm Titanium Turn Buckle (2pcs)
YOK-ZC-TB25T
This special screw is manufactured with a reverse thread on one side of the screw at both ends, allowing the distance between parts at both ends to be adjusted when the screw is rotated in one direction. It is mainly used for upper arms and tie rods to facilitate adjustment of camber...
CHF9.90
Auf Lager  
+ −
27mm Titanium Turn Buckle (2pcs)
YOK-ZC-TB27T
This special screw is manufactured with a reverse thread on one side of the screw at both ends, allowing the distance between parts at both ends to be adjusted when the screw is rotated in one direction. It is mainly used for upper arms and tie rods to facilitate adjustment of camber...
CHF9.90
Auf Lager  
+ −
30mm Titanium Turn Buckle (2pcs)
YOK-ZC-TB30T
This special screw is manufactured with a reverse thread on one side of the screw at both ends, allowing the distance between parts at both ends to be adjusted when the screw is rotated in one direction. It is mainly used for upper arms and tie rods to facilitate adjustment of camber...
CHF11.90
Nicht auf Lager
33mm Titanium Turn Buckle (2pcs)
YOK-ZC-TB33T
This special screw is manufactured with a reverse thread on one side of the screw at both ends, allowing the distance between parts at both ends to be adjusted when the screw is rotated in one direction. It is mainly used for upper arms and tie rods to facilitate adjustment of camber...
CHF11.90
Auf Lager  
+ −
36mm Titanium Turn Buckle (2pcs)
YOK-ZC-TB36T
This special screw is manufactured with a reverse thread on one side of the screw at both ends, allowing the distance between parts at both ends to be adjusted when the screw is rotated in one direction. It is mainly used for upper arms and tie rods to facilitate adjustment of camber...
CHF11.90
Auf Lager  
+ −
39mm Titanium Turn Buckle (2pcs)
YOK-ZC-TB39T
This special screw is manufactured with a reverse thread on one side of the screw at both ends, allowing the distance between parts at both ends to be adjusted when the screw is rotated in one direction. It is mainly used for upper arms and tie rods to facilitate adjustment of camber...
CHF11.90
Auf Lager  
+ −
42mm Titanium Turn Buckle (2pcs)
YOK-ZC-TB42T
This special screw is manufactured with a reverse thread on one side of the screw at both ends, allowing the distance between parts at both ends to be adjusted when the screw is rotated in one direction. It is mainly used for upper arms and tie rods to facilitate adjustment of camber...
CHF12.90
Auf Lager  
+ −
50mm Titanium Turn Buckle (2pcs)
YOK-ZC-TB50T
This special screw is manufactured with a reverse thread on one side of the screw at both ends, allowing the distance between parts at both ends to be adjusted when the screw is rotated in one direction. It is mainly used for upper arms and tie rods to facilitate adjustment of camber...
CHF13.90
Auf Lager  
+ −
Aluminum Bellcrank Base for RD2.0
YOK-Y2-202BB
This aluminum base increases the mounting rigidity of the bellcrank post and allows the offset of the bellcrank to be changed. It expands the options for the Ackermann ratio, which is most important for drift cars.
CHF14.90
Auf Lager  
+ −
Motor Brushes (2pcs)
YOK-YM-086
Replacement motor brushes for Yokomo Pro Stock and Drift series brush motors. 5mm x 4mm size.
CHF4.90
Auf Lager  
+ −
Graphite Scale (150mm)
YOK-YT-CS15
This scale is manufactured with real carbon material. Keep it in your tool case to help you in various situations.
CHF17.90
Auf Lager  
+ −
RP Ultra Shock Oil #40 (Red)
YOK-RP-113400
CHF8.90
Auf Lager  
+ −
Front Tire for YZ-870C
YOK-TF-8
CHF13.90
Auf Lager  
+ −
Rear Tire for YZ-870C
YOK-TR-8
CHF14.90
Auf Lager  
+ −
Bumper/Wire Plate for YZ-870C
YOK-YZ-001
CHF7.40
Nicht auf Lager
Univ. Drive Shaft (2pcs) for YZ-870C
YOK-YZ-010
CHF38.90
Auf Lager  
+ −
Front Shock Set (2pcs) for RO1.0
YOK-Z2-S1FS
CHF22.90
Auf Lager  
+ −
Front suspension mount plate for RO1.0 (steel/2 pi
YOK-Z2-300FBS
CHF7.90
Auf Lager  
+ −
Rubber Band for Tire Adhesion (15mm width/20pcs)
YOK-YT-WG3
CHF11.00
Auf Lager  
+ −
FRP Front Shock Tower for YZ-870C
YOK-YZ-017
CHF13.90
Auf Lager  
+ −
Wing for YZ-870C
YOK-YZ-101W
CHF14.90
Auf Lager  
+ −
Steering Hub Carrier for YZ-870C
YOK-YZ-413
CHF7.90
Auf Lager  
+ −
King Pin (2pcs.) for YZ-870C
YOK-YZ-414
CHF5.90
Auf Lager  
+ −
Alum. Steering Block L/R for YZ-870C
YOK-YZ-415
CHF11.90
Auf Lager  
+ −
Front Wheel (Pink) for YZ-870C
YOK-YZ-821
CHF7.90
Auf Lager  
+ −
Rear Wheel (Pink) for YZ-870C
YOK-YZ-827
CHF8.50
Auf Lager  
+ −
O-Ring Set (P3x4/F8x2/F10x2) for YZ-870C
YOK-YZ-S3OS
CHF4.90
Auf Lager  
+ −
Shock Cap (4pcs.) for YZ-870C
YOK-YZ-S8
CHF5.90
Auf Lager  
+ −
Super Dog Fighter Decal
YOK-ZC-D4PI
These Super Dog Fighter decals are reminiscent of the 80s. The lineup includes the same four colors as at the time: pink, red, white, and black, to match the body color.
CHF5.90
Auf Lager  
+ −
Verfügbarkeit
Verfügbar beim Lieferanten
Abmessungen
Auswahlhilfe
Material
Preis

CHF  –  CHF

  • ‎CHF1.5
  • ‎CHF949
Reifen/Rad-Typ
Servo-Typ
Verwendung
Massstab
Motor / Antrieb
Einsatz
Anspruch
Lackierung
Fertigungsgrad
Max. Geschwindigkeit
Marke
Betriebsspannung
Zurücksetzen (reset)