Français (CH)
ERSATZTEIL-FINDER

Yokomo

Trier par:
Recommandé
Montrer:
96
13Shock Piston f1.6x2x2.0mmfor SO/MO2.0
YOK-S4-S16213
Piston for F13mm shock. The hole diameter is 1.6mm and there are 2 holes. The thickness of the piston is 2.0mm. Contains 2 pieces.
CHF 7.90
En stock  
+ −
13Shock Piston f1.7x2x2.0mmfor SO/MO2.0
YOK-S4-S17213
Piston for F13mm shock. The hole diameter is 1.7mm with 2 holes. The thickness of the piston is 2.0mm. Contains 2 pieces.
CHF 7.90
En stock  
+ −
13Shock Piston f1.8x2x2.0mmfor SO/MO2.0
YOK-S4-S18213
Piston for F13mm shock. The hole diameter is 1.8mm and there are 2 holes. The thickness of the piston is 2.0mm. Contains 2 pieces.
CHF 7.90
En stock  
+ −
Graphite RTC Axle Block Spacer (2.4mm)
YOK-B12-RTC-7
This graphite plate is mounted on the front bumper to strengthen the bumper. By catching crashes and other impacts with the bulkhead, it prevents damage to the front part of the main chassis.
CHF 12.90
En stock  
+ −
Graphite Bumper Support (2.4mm
YOK-B12-001BS
This graphite plate is mounted on the front bumper to strengthen the bumper. By catching crashes and other impacts with the bulkhead, it prevents damage to the front part of the main chassis.
CHF 9.90
En stock  
+ −
Graphite Front Shock Tower Stiffner (2.4mm)
YOK-B12-017S
This graphite plate connects the lower portion of the front shock tower to increase rigidity. It increases the rigidity of the shock tower and improves the shock's operating precision, while leaving the bulkhead surrounding it supple.
CHF 9.90
En stock  
+ −
Graphite Separate Battery Holder
YOK-B12-118S
Lightweight graphite battery holder. Split front and rear sections allow the chassis to remain flexible for torsion. Spacers are included to adjust to the battery thickness.
CHF 20.90
En stock  
+ −
Graphite Steering Block Arm L (2.4mm)
YOK-B12-RTC-5L
Graphite arm plate with an extended tie rod mounting position compared to the RTC standard arm to reduce toe-in change during suspension stroke. It improves turning performance especially on high grip surfaces.
CHF 11.90
En stock  
+ −
Yokomo Off-Road 13mm Feder DOT8 (6.25t) 2stk.
YOK-YS-12625F
These springs are compatible with the F13mm high-capacity shocks adopted from the SO2.0 off-road car. The hardness of the spring is laser-engraved according to the number of turns the higher the number of DOT, the harder the spring. There are 5 types of front releases and 4 types of...
CHF 9.90
En stock  
+ −
Yokomo Off-Road 13mm Feder DOT7 (6.50t) 2stk.
YOK-YS-12650F
These springs are compatible with the F13mm high-capacity shocks adopted from the SO2.0 off-road car. The hardness of the spring is laser-engraved according to the number of turns the higher the number of DOT, the harder the spring. There are 5 types of front releases and 4 types of...
CHF 9.90
En stock  
+ −
Yokomo Off-Road 13mm Feder DOT6 (6.75t) 2stk.
YOK-YS12675F
These springs are compatible with the F13mm high-capacity shocks adopted from the SO2.0 off-road car. The hardness of the spring is laser-engraved according to the number of turns the higher the number of DOT, the harder the spring. There are 5 types of front releases and 4 types of...
CHF 9.90
En stock  
+ −
Yokomo Off-Road 13mm Feder DOT5 (7.00t) 2stk.
YOK-YS-12700F
These springs are compatible with the F13mm high-capacity shocks adopted from the SO2.0 off-road car. The hardness of the spring is laser-engraved according to the number of turns the higher the number of DOT, the harder the spring. There are 5 types of front releases and 4 types of...
CHF 9.90
En stock  
+ −
Yokomo Off-Road 13mm Feder DOT4 (7.25t) 2stk.
YOK-YS-12725F
These springs are compatible with the F13mm high-capacity shocks adopted from the SO2.0 off-road car. The hardness of the spring is laser-engraved according to the number of turns the higher the number of DOT, the harder the spring. There are 5 types of front releases and 4 types of...
CHF 9.90
En stock  
+ −
Yokomo Off-Road 13mm Feder DOT6 (10.0t) 2stk.
YOK-YS-12100R
These springs are compatible with the F13mm high-capacity shocks adopted from the SO2.0 off-road car. The hardness of the spring is laser-engraved according to the number of turns the higher the number of DOT, the harder the spring. There are 5 types of front releases and 4 types of...
CHF 9.90
En stock  
+ −
Yokomo Off-Road 13mm Feder DOT5 (10.5t) 2stk.
YOK-YS-12105R
These springs are compatible with the F13mm high-capacity shocks adopted from the SO2.0 off-road car. The hardness of the spring is laser-engraved according to the number of turns the higher the number of DOT, the harder the spring. There are 5 types of front releases and 4 types of...
CHF 9.90
En stock  
+ −
Yokomo Off-Road 13mm Feder DOT4 (11.0t) 2stk.
YOK-YS-12110R
These springs are compatible with the F13mm high-capacity shocks adopted from the SO2.0 off-road car. The hardness of the spring is laser-engraved according to the number of turns the higher the number of DOT, the harder the spring. There are 5 types of front releases and 4 types of...
CHF 9.90
En stock  
+ −
Yokomo Off-Road 13mm Feder DOT3 (11.5t) 2stk.
YOK-YS-12115R
These springs are compatible with the F13mm high-capacity shocks adopted from the SO2.0 off-road car. The hardness of the spring is laser-engraved according to the number of turns the higher the number of DOT, the harder the spring. There are 5 types of front releases and 4 types of...
CHF 9.90
En stock  
+ −
Alum.Rear Bulk Head (Left) for MO Series
YOK-MO-002RL
CHF 24.90
En stock  
+ −
Alum.Rear Bulk Head (Right) for MO Series
YOK-MO-002RR
CHF 24.90
En stock  
+ −
Front Sus_arm L/R for MO Series
YOK-MO-008F
CHF 10.90
En stock  
+ −
Center Bone 100mm for MO2.0
YOK-MO-010B10
CHF 8.50
En stock  
+ −
Center Bone 51mm for MO2.0
YOK-MO-010B51
CHF 8.50
En stock  
+ −
Center Bone 67mm for MO2.0
YOK-MO-010B67
CHF 8.50
En stock  
+ −
Graphite Front Shock Tower for MO Series
YOK-MO-017
CHF 18.90
En stock  
+ −
Graphite Rear Shock Tower for MO Series
YOK-MO-018
CHF 22.90
En stock  
+ −
MO2.0 Body Shell w/Mask. (Std.) for MO Series
YOK-MO-101
CHF 26.90
En stock  
+ −
Graphite Battery Plate for MO2.0
YOK-MO-118P
CHF 6.90
En stock  
+ −
Graphite Servo Mount Plate for MO2.0
YOK-MO-203P
CHF 9.90
En stock  
+ −
Alum.Center Mount for MO2.0
YOK-MO-302CM
CHF 21.50
En stock  
+ −
Slipper Nuts/Spring for MO2.0
YOK-MO-303AJ
CHF 8.90
En stock  
+ −
Center Diff. Bearing Collar for MO2.0
YOK-MO-303BC
CHF 4.90
En stock  
+ −
Front Drive Plate for MO2.0
YOK-MO-303DP
CHF 7.90
En stock  
+ −
Main Drive Shaft for MO2.0
YOK-MO-303MS
CHF 8.90
En stock  
+ −
Slipper Outer Plate for MO2.0
YOK-MO-303OP
CHF 8.90
En stock  
+ −
Graphite Center Mount Plate for MO2.0
YOK-MO-304CP
CHF 10.90
En stock  
+ −
Graph.Steering Block Plate DOT1 for MO Series
YOK-MO-415P1
CHF 11.90
En stock  
+ −
COL Adjusting Screw Set for MO2.0
YOK-MO-303AJS
CHF 4.90
En stock  
+ −
f12xf18x4mm Ball Bearing (2 pcs.)
YOK-BB-1812-2
CHF 9.90
En stock  
+ −
Front Steering Hub Carrier
YOK-B12-413
CHF 10.90
En stock  
+ −
Battery Stopper
YOK-RS-118
CHF 4.90
En stock  
+ −
FRP F/R Upper Deck (2.0mm)
YOK-RS-003
CHF 12.50
En stock  
+ −
FRP Center Upper Deck (2.0mm)
YOK-RS-003B
CHF 5.90
En stock  
+ −
Aluminum Center Upper Deck Support
YOK-RS-003BP
CHF 11.90
En stock  
+ −
Aluminum Upper Deck Post
YOK-RS-003P
CHF 5.20
En stock  
+ −
F/R Universal Drive Shaft (45.5mm)
YOK-RS-010
CHF 24.50
En stock  
+ −
Plastic Wheel Hub (4pcs)
YOK-RS-011H
CHF 3.90
En stock  
+ −
Plastic F/R Shock Tower
YOK-RS-017
CHF 6.90
En stock  
+ −
Bell Crank LR Center Link
YOK-RS-202
CHF 7.90
En stock  
+ −
Bell Crank Post (2pcs)
YOK-RS-202P
CHF 6.90
En stock  
+ −
Aluminum Servo Stay
YOK-RS-203A
CHF 13.50
En stock  
+ −
Aluminum Outer Servo Stay
YOK-RS-203P
CHF 6.90
En stock  
+ −
FRP Servo Stay Plate
YOK-RS-203PL
CHF 6.90
En stock  
+ −
Front/Rear Suspension Mount
YOK-RS-301
CHF 7.90
En stock  
+ −
Bulkhead A/B
YOK-RS-302
CHF 6.90
En stock  
+ −
Front/Rear Bulkhead Cap
YOK-RS-302C
CHF 6.90
En stock  
+ −
Aluminum Motor Plate
YOK-RS-302M
CHF 16.90
En stock  
+ −
117T F/R Drive Belt
YOK-RS-351L
CHF 7.90
En stock  
+ −
Joint Protector
YOK-RS-500DP
CHF 4.90
En stock  
+ −
Maintenance Kit for Gear Diff
YOK-RS-500GM
CHF 7.90
En stock  
+ −
Aluminum Gear Diff Drive Cup (4pcs)
YOK-RS-501GA
CHF 16.90
En stock  
+ −
Gear Diff Gasket
YOK-RS-501GG
CHF 3.90
En stock  
+ −
40T Diff Pully / Diff Case
YOK-RS-503GH
CHF 7.90
En stock  
+ −
Gear Diff Bevel Set
YOK-RS-503GP
CHF 10.90
En stock  
+ −
F/R Pully
YOK-RS-630
CHF 4.90
En stock  
+ −
Main Shaft
YOK-RS-644
CHF 4.90
En stock  
+ −
Plastic Belt Tension Cam (4pcs)
YOK-RS-BTC
CHF 5.90
En stock  
+ −
86T Spur Gear (DP48)
YOK-RS-SG4886
CHF 5.90
En stock  
+ −
F/R Shock Spring (4pcs)
YOK-YS-RSS
CHF 8.90
En stock  
+ −
M3x5mm FTHS Screw (4pcs)
YOK-ZC-FT35
CHF 4.50
En stock  
+ −
Aluminum steering bell crank 20mm for BD10/9
YOK-B10-202SBLA
This is an optional steering bell crank that changes the steering characteristics of BD10. The length from the center of the steering post to the linkage pivot at the tip is 20mm, which is 1.5mm longer than the BD10 standard bell crank (18.5mm). The Ackermann ratio changes and the turning...
CHF 24.90
En stock  
+ −
Yokomo Racing Tool Turnbuckle Wrench 4.0mm (Carbon
YOK-YT-TBWRA
This is a tool that makes it easier to turn the 4.0mm size turnbuckle used in Yokomo machines. The carbon handle has a red anodized accent, giving it a lacy look. This is an essential tool when setting camber and toe-in.
CHF 18.90
En stock  
+ −
Cooling fan mount for SO1.0/2.0/YZ-2
YOK-Z2-CFM
CHF 22.90
En stock  
+ −
Cooling fan mount for YZ-4SF
YOK-S4-CFMA
entspricht: S4-CFM
CHF 24.50
En stock  
+ −
Molded Suspension Parts Set for RO1.0
YOK-Z2-300RO
CHF 15.90
En stock  
+ −
Horizontal Body Mount für BD12
YOK-B12-016HB
Compatible with rear body posts that protrude rearward, such as BD12, these mounting parts reliably receive downforce and increase rear traction. Compatible with Twister/Twister Special bodies, the mounting parts are secured to the body using the wing fixing screws. Offset can be...
CHF 8.90
En stock  
+ −
16mm Titanium Turn Buckle (2pcs)
YOK-ZC-TB16T
This special screw is manufactured with a reverse thread on one side of the screw at both ends, allowing the distance between parts at both ends to be adjusted when the screw is rotated in one direction. It is mainly used for upper arms and tie rods to facilitate adjustment of camber...
CHF 8.90
Rupture de stock
18mm Titanium Turn Buckle (2pcs)
YOK-ZC-TB18T
This special screw is manufactured with a reverse thread on one side of the screw at both ends, allowing the distance between parts at both ends to be adjusted when the screw is rotated in one direction. It is mainly used for upper arms and tie rods to facilitate adjustment of camber...
CHF 8.90
En stock  
+ −
20mm Titanium Turn Buckle (2pcs)
YOK-ZC-TB20T
This special screw is manufactured with a reverse thread on one side of the screw at both ends, allowing the distance between parts at both ends to be adjusted when the screw is rotated in one direction. It is mainly used for upper arms and tie rods to facilitate adjustment of camber...
CHF 9.90
En stock  
+ −
25mm Titanium Turn Buckle (2pcs)
YOK-ZC-TB25T
This special screw is manufactured with a reverse thread on one side of the screw at both ends, allowing the distance between parts at both ends to be adjusted when the screw is rotated in one direction. It is mainly used for upper arms and tie rods to facilitate adjustment of camber...
CHF 9.90
En stock  
+ −
27mm Titanium Turn Buckle (2pcs)
YOK-ZC-TB27T
This special screw is manufactured with a reverse thread on one side of the screw at both ends, allowing the distance between parts at both ends to be adjusted when the screw is rotated in one direction. It is mainly used for upper arms and tie rods to facilitate adjustment of camber...
CHF 9.90
En stock  
+ −
30mm Titanium Turn Buckle (2pcs)
YOK-ZC-TB30T
This special screw is manufactured with a reverse thread on one side of the screw at both ends, allowing the distance between parts at both ends to be adjusted when the screw is rotated in one direction. It is mainly used for upper arms and tie rods to facilitate adjustment of camber...
CHF 11.90
En stock  
+ −
33mm Titanium Turn Buckle (2pcs)
YOK-ZC-TB33T
This special screw is manufactured with a reverse thread on one side of the screw at both ends, allowing the distance between parts at both ends to be adjusted when the screw is rotated in one direction. It is mainly used for upper arms and tie rods to facilitate adjustment of camber...
CHF 11.90
En stock  
+ −
36mm Titanium Turn Buckle (2pcs)
YOK-ZC-TB36T
This special screw is manufactured with a reverse thread on one side of the screw at both ends, allowing the distance between parts at both ends to be adjusted when the screw is rotated in one direction. It is mainly used for upper arms and tie rods to facilitate adjustment of camber...
CHF 11.90
En stock  
+ −
39mm Titanium Turn Buckle (2pcs)
YOK-ZC-TB39T
This special screw is manufactured with a reverse thread on one side of the screw at both ends, allowing the distance between parts at both ends to be adjusted when the screw is rotated in one direction. It is mainly used for upper arms and tie rods to facilitate adjustment of camber...
CHF 11.90
En stock  
+ −
42mm Titanium Turn Buckle (2pcs)
YOK-ZC-TB42T
This special screw is manufactured with a reverse thread on one side of the screw at both ends, allowing the distance between parts at both ends to be adjusted when the screw is rotated in one direction. It is mainly used for upper arms and tie rods to facilitate adjustment of camber...
CHF 12.90
En stock  
+ −
50mm Titanium Turn Buckle (2pcs)
YOK-ZC-TB50T
This special screw is manufactured with a reverse thread on one side of the screw at both ends, allowing the distance between parts at both ends to be adjusted when the screw is rotated in one direction. It is mainly used for upper arms and tie rods to facilitate adjustment of camber...
CHF 13.90
En stock  
+ −
Aluminum Bellcrank Base for RD2.0
YOK-Y2-202BB
This aluminum base increases the mounting rigidity of the bellcrank post and allows the offset of the bellcrank to be changed. It expands the options for the Ackermann ratio, which is most important for drift cars.
CHF 14.90
En stock  
+ −
Motor Brushes (2pcs)
YOK-YM-086
Replacement motor brushes for Yokomo Pro Stock and Drift series brush motors. 5mm x 4mm size.
CHF 4.90
En stock  
+ −
Graphite Scale (150mm)
YOK-YT-CS15
This scale is manufactured with real carbon material. Keep it in your tool case to help you in various situations.
CHF 17.90
Rupture de stock
RP Ultra Shock Oil #40 (Red)
YOK-RP-113400
CHF 8.90
En stock  
+ −
Front Tire for YZ-870C
YOK-TF-8
CHF 13.90
En stock  
+ −
Rear Tire for YZ-870C
YOK-TR-8
CHF 14.90
En stock  
+ −
Bumper/Wire Plate for YZ-870C
YOK-YZ-001
CHF 7.40
Rupture de stock
Univ. Drive Shaft (2pcs) for YZ-870C
YOK-YZ-010
CHF 38.90
En stock  
+ −
Front Shock Set (2pcs) for RO1.0
YOK-Z2-S1FS
CHF 22.90
En stock  
+ −
Front suspension mount plate for RO1.0 (steel/2 pi
YOK-Z2-300FBS
CHF 7.90
En stock  
+ −
Verfügbarkeit
Verfügbar beim Lieferanten
Abmessungen
Auswahlhilfe
Material
Prix
CHF
–
CHF
  • CHF 1.5
  • CHF 949
Reifen/Rad-Typ
Servo-Typ
Verwendung
Massstab
Motor / Antrieb
Einsatz
Anspruch
Lackierung
Fertigungsgrad
Max. Geschwindigkeit
Marke
Betriebsspannung
Effacer