Français (CH)
ERSATZTEIL-FINDER

Yokomo

Trier par:
Recommandé
Montrer:
96
Gear Cover / Rear Wing Mount RO2.0
YOK-RO-304GC
CHF 7.90
En stock
+ −
Resin Shock Cap Balls für RS2.0
YOK-RS-8B
Plastic shock cap balls used in RookieSpeed RS2.0. 4pcs.
CHF 3.90
En stock
+ −
1.8mm 2-Hole Pistons für 13mm Shocks SO/MO
YOK-S4-S182-25
This is a piston for SO/MO series 13mm big bore shocks. The hole diameter is 2 holes of 1.8 to 2.0mm, but the piston thickness is set to 2.5mm to obtain firm damping due to hydrodynamic action. Packed 2 pieces each.
CHF 6.90
En stock
+ −
1.9mm 2-Hole Piston für 13mm Shocks SO/MO
YOK-S4-S192-25
This is a piston for SO/MO series 13mm big bore shocks. The hole diameter is 2 holes of 1.8 to 2.0mm, but the piston thickness is set to 2.5mm to obtain firm damping due to hydrodynamic action. Packed 2 pieces each.
CHF 6.90
En stock
+ −
2.0mm 2-Hole Pistons für 13mm Shocks SO/MO
YOK-S4-S202-25
This is a piston for SO/MO series 13mm big bore shocks. The hole diameter is 2 holes of 1.8 to 2.0mm, but the piston thickness is set to 2.5mm to obtain firm damping due to hydrodynamic action. Packed 2 pieces each.
CHF 6.90
En stock
+ −
Front Sway Bar 0.9mm for SO Series (1pcs)
YOK-SO-412F09
Front sway bar for SO series, available in 3 types from Φ0.9 to 1.1mm, one each for easy purchase.
CHF 3.90
En stock
+ −
Front Sway Bar 1.0mm for SO Series (1pcs)
YOK-SO-412F10
Front sway bar for SO series, available in 3 types from Φ0.9 to 1.1mm, one each for easy purchase.
CHF 3.90
En stock
+ −
Front Sway Bar 1.1mm for SO Series (1pcs)
YOK-SO-412F11
Front sway bar for SO series, available in 3 types from Φ0.9 to 1.1mm, one each for easy purchase.
CHF 3.90
Steel Front Axle for double Bearing
YOK-RD-010FDA
This is a front axle sold separately, used for the double-bearing design that provides the ultimate in front tire rolling. While made of steel for increased strength, the 3mm shaft and hub shape provide a lightweight finish.
CHF 14.90
En stock
+ −
40mm Fan Shroud for Mid Motor MS1.0
YOK-YM-FS40
This fan shroud is designed to be used in conjunction with a cooling fan on a touring car chassis to effectively increase the cooling effect of the motor. The 40mm fan shroud is attached to the chassis with double-sided tape to direct the airflow from the fan to the engine, and can be used not...
CHF 13.90
En stock
+ −
40T Pulley for Front Solid Axle RS1.0/RS2.0
YOK-RS-501SP
CHF 6.90
En stock
+ −
Body Wax 35cc
YOK-CS-WB
Dieses Karosseriewachs ist für Polycarbonat- und Kunststoffkarosserien von RC-Fahrzeugen geeignet und wird in einer praktischen Quetschflasche geliefert. Einfach etwas Wachs herausdrücken und mit einem weichen Tuch auftragen – so lassen sich Staub und Schmutz leicht entfernen und der Glanz der...
CHF 14.90
En stock
+ −
Machine Cut 38T Pulley for Aluminium Gear Diff
YOK-MS-503GP
CHF 21.90
En stock
+ −
O-Ring for Aluminium Gear Diff BD11/BD12/MS1.0
YOK-MS-503GO
CHF 2.90
En stock
+ −
Universal 30mm Fan Shroud
YOK-YM-FS30
This fan shroud is fitted to a 30mm fan to increase cooling efficiency through the channel effect. It is mounted on an adjustable angle bracket and can be installed on a variety of machines. It is particularly suitable for drift cars that require engine cooling and can be attached to the upper...
CHF 14.90
En stock
+ −
Shock Diaphragm (soft) MS1.0/Big Bore Shocks
YOK-YS-8DS2
Diaphragm for MS series and big bore shocks for drifting. The weak resilience of the soft type is effective in increasing traction on low-grip surfaces.
CHF 7.90
En stock
+ −
Aluminum Height Gauge for Touring Car (3-7.5mm)
YOK-YT-HGTC2
Height gauge for touring cars that require detailed measurements. Made from high precision aluminium, the front and back can be used separately to measure in 0.1mm increments. The engraving is large and easy to read, allowing quick readings even during busy race intervals.
CHF 20.90
En stock
+ −
Aluminum Lower Bulkhead (A) FL/RR RS1.0/RS2.0
YOK-RS-32ALA
CHF 26.90
En stock
+ −
Sway Bar Holder RS2.0
YOK-RS-412SH
CHF 9.90
En stock
+ −
Felgen Drift 6-Spoke 5mm Offset Weiss (2stk.)
YOK-TW-5313W5
New design wheels for drifting. Offsets will be available in 5mm and 7mm, each in black and white. Rubber bands for mounting tires are included. Depending on the road conditions, these wheels have the effect of increasing traction and are especially compatible with P-tile road surfaces. Packed...
CHF 9.90
En stock
+ −
Felgen Drift 6-Spoke 5mm Offset Schwarz (2stk.)
YOK-TW-5313B5
New design wheels for drifting. Offsets will be available in 5mm and 7mm, each in black and white. Rubber bands for mounting tires are included. Depending on the road conditions, these wheels have the effect of increasing traction and are especially compatible with P-tile road surfaces. Packed...
CHF 9.90
En stock
+ −
Felgen Drift 6-Spoke 7mm Offset Weiss (2stk.)
YOK-TW-5313W7
New design wheels for drifting. Offsets will be available in 5mm and 7mm, each in black and white. Rubber bands for mounting tires are included. Depending on the road conditions, these wheels have the effect of increasing traction and are especially compatible with P-tile road surfaces. Packed...
CHF 9.90
En stock
+ −
Felgen Drift 6-Spoke 7mm Offset Schwarz (2stk.)
YOK-TW-5313B7
New design wheels for drifting. Offsets will be available in 5mm and 7mm, each in black and white. Rubber bands for mounting tires are included. Depending on the road conditions, these wheels have the effect of increasing traction and are especially compatible with P-tile road surfaces. Packed...
CHF 9.90
En stock
+ −
Alu lightweight SP Steering Block RD/SD Purple
YOK-Y2-415SAP
This is a color version of the Offset 0 steering block for the RD/SD series, which has been well- eceived for its neutral characteristics, and now comes in three new colors: blue, purple, and red to match the machine color. Compared to the standard plastic blocks, the aluminum version is much...
CHF 37.90
En stock
+ −
Offset Rear Universal Joint Bearing Adapter
YOK-RD-415BA
CHF 9.90
En stock
+ −
Rotor Racing Performer DX2 Motor 12.3x7.25x24mm
YOK-RP-119
This rotor is used in the latest motor for drifting, the Racing Performer DX2 Type-R. The magnets are equipped with rings to prevent damage and are highly durable. There are two types of rotors: 12.3mm diameter for 11.5/13.5T and 12.5mm diameter for 15.5T. The rotors can be used as spare rotors...
CHF 69.90
Rotor Racing Performer DX2 12.5x7.25x24mm
YOK-RP-120
This rotor is used in the latest motor for drifting, the Racing Performer DX2 Type-R. The magnets are equipped with rings to prevent damage and are highly durable. There are two types of rotors: 12.3mm diameter for 11.5/13.5T and 12.5mm diameter for 15.5T. The rotors can be used as spare rotors...
CHF 69.90
Servo Saver (3 Adapters)
YOK-ZC-204P
This servo saver prevents damage to the servo gear from crashes. The coil spring construction ensures smooth and reliable operation. Three types of adapters are provided to match the servo axis, so it can be used with servos from various manufacturers.
CHF 11.90
En stock
+ −
Aluminium Front Shock Tower (Blue) RD/SD Series
YOK-Y2-017AFEBL
Newly released are the Hybrid Front Shock Tower (Blue), an optional part for the RD/SD series, and the standard aluminum shock tower for the SD3.0 Blue version. Both are designed for the same series and can be bolted on to the RD2.0 chassis and other chassis.
CHF 45.90
En stock
+ −
Aluminium Wire Guide for 12AWG (Black / 2 Holes)
YOK-ZC-WGB2
This is an aluminum wire guide that neatly organizes motor and battery wiring. It is especially useful for off-road cars and drift cars where the motor and battery are far away from the ESC, and allows you to compensate for cable variations for a clean finish. The size allows for use with the...
CHF 10.90
En stock
+ −
Aluminium Wire Guide for 12AWG (Black / 3 Holes)
YOK-ZC-WGB3
This is an aluminum wire guide that neatly organizes motor and battery wiring. It is especially useful for off-road cars and drift cars where the motor and battery are far away from the ESC, and allows you to compensate for cable variations for a clean finish. The size allows for use with the...
CHF 10.90
En stock
+ −
Diaphragm for Standard Shock (4pcs)
YOK-YS-8DN
These silicon diaphragms are ideal for use with resin shocks such as the RS and RD series. 4 diaphragms are included in a set, so they can be used for maintenance.
CHF 4.90
En stock
+ −
Kohlefaser Oberdeck Vorne 2.0mm MS2.0
YOK-MS-003F-2
CHF 27.90
En stock
+ −
Kohlefaser Oberdeck hinten 2.0mm MS2.0
YOK-MS-003R-2
CHF 27.90
En stock
+ −
Kohlefaser Querlenker Hinten Unten 2.4mm MS2.0
YOK-MS-008R-2
CHF 27.90
En stock
+ −
Kohlefaser Dämpferbrücke Vorne 3.0mm MS2.0
YOK-MS-017-2
CHF 23.90
En stock
+ −
Aluminium Lenkungspfosten 2Stk. MS2.0
YOK-MS-201P-2
CHF 15.90
En stock
+ −
Aluminium Motorhalter MS2.0
YOK-MS-302M-2
CHF 37.90
En stock
+ −
Aluminium Bulkhead Vorne Links MS2.0
YOK-MS-32FLL-2
CHF 27.90
Aluminium Bulkhead Vorne Rechts MS2.0
YOK-MS-32FLR-2
CHF 27.90
Aluminium Bulkhead Hinten Links MS2.0
YOK-MS-32RLL-2
CHF 31.90
Aluminium Bulkhead Hinten Rechts MS2.0
YOK-MS-32RLR-2
CHF 30.90
Stabilisator Vorne 1.0 MS2.0
YOK-MS-412F0-2
CHF 8.90
En stock
+ −
Stabilisator Vorne 1.1 MS2.0
YOK-MS-412F1-2
CHF 8.90
En stock
+ −
Stabilisator Vorne 1.2 MS2.0
YOK-MS-412F2-2
CHF 8.90
Stabilisator Hinten 1.0 MS2.0
YOK-MS-412R0-2
CHF 8.90
Stabilisator Hinten 1.1 MS2.0
YOK-MS-412R1-2
CHF 8.90
En stock
+ −
Stabilisator Hinten 1.2 MS2.0
YOK-MS-412R2-2
CHF 8.90
En stock
+ −
Nachlauf Messzeiger MS2.0
YOK-MS-CMJ
CHF 9.90
En stock
+ −
Feder Linear Grün 2.40 17mm MS2.0
YOK-MS-SLS240
CHF 11.90
En stock
+ −
Feder Linear Orange 2.5 17mm MS2.0
YOK-MS-SLS250
CHF 11.90
En stock
+ −
Hauptzahnrad DTS 90T 64DP Hart
YOK-SG-A6490W
CHF 6.90
En stock
+ −
M3x4mm FH Stufenschraube Schwarz 1.9mm 4Stk.
YOK-ZC-F34SB
CHF 7.90
En stock
+ −
M3x4mm FH Stufenschraube Silber 1.7mm 4Stk.
YOK-ZC-F34SS
CHF 7.90
En stock
+ −
Riemen Vorne/Hinten 120T MS2.0
YOK-BD-360L
CHF 9.90
En stock
+ −
Center Bone 100mm for MO3.0
YOK-MO-010B10-3
CHF 9.90
En stock
+ −
Center Bone 50mm for MO3.0
YOK-MO-010B50
CHF 8.90
En stock
+ −
Center Drive Joint for MO3.0
YOK-MO-010DC-3
CHF 9.90
En stock
+ −
Graphite Front Shock Tower for MO3.0
YOK-MO-017-3
CHF 19.90
En stock
+ −
Graphite Rear Shock Tower for MO3.0
YOK-MO-018-3
CHF 25.90
Alum.Bellcrank Post for MO3.0
YOK-MO-201P-3
CHF 7.90
En stock
+ −
Alum.Servo Mount for MO3.0
YOK-MO-203A-3
CHF 22.90
En stock
+ −
Graphite Servo Mount Plate for MO3.0
YOK-MO-203P-3
CHF 9.90
En stock
+ −
Alum.Rear Sus Mount(Front) for MO3.0
YOK-MO-300RF-3
CHF 22.90
En stock
+ −
Alum.Rear Sus Mount(Rear) for MO3.0
YOK-MO-300RR-3
CHF 22.90
En stock
+ −
Plastic Main Chassis Wonder Dog Fighter
YOK-ZB-002W
CHF 39.90
Plastic Front Suspension Arm Wonder Dog Fighter
YOK-ZB-008FW
CHF 8.90
Plastic Trailing Arm / Rear Shock Crank Wonder Dog
YOK-ZB-008RW
CHF 8.90
Body Set Wonder Dog Fighter (with Masking)
YOK-ZB-101WD
CHF 35.90
Torque Limited Pad (2Pcs) Wonder Dog Fighter
YOK-ZB-630CW
CHF 5.90
Torque Limiter Plate (2Pcs) Wonder Dog Fighter
YOK-ZB-630PW
CHF 9.90
Torque Limiter Spring Wonder Dog Fighter
YOK-ZB-630SW
CHF 3.90
Torque Limiter Rear Sprocket 12T Wonder Dog
YOK-ZB-630W
CHF 12.90
Torque Limiter Shaft Wonder Dog Fighter
YOK-ZB-631W
CHF 6.90
Aluminium Roll Bar Wonder Dog Fighter
YOK-ZB-RBW
CHF 15.90
Aluminium Front Shock Body (Silver) Wonder Dog
YOK-ZB-S4F
CHF 8.90
Aluminium Rear Shock Body (Gold) Wonder Dog
YOK-ZB-S4RW
CHF 9.90
Wonder Dog Fighter Decal
YOK-ZB-WDD
CHF 6.90
En stock
+ −
M3x6 High Precision FH Screw (120°) MS2.0 4Stk.
YOK-ZC-F36SH
These FH socket screws are designed for use with MS2.0 aluminum chassis. Their pan head taper is 120 degrees (standard pan heads are 90 degrees), making them the optimal shape for 1.5mm thick MS2.0 aluminum chassis. Made of steel, they enable precise part fixation through high-precision...
CHF 6.90
En stock
+ −
M3x6 High Precision FH Screw (120°) MS2.0 10Stk.
YOK-ZC-F36SH-10
These FH socket screws are designed for use with MS2.0 aluminum chassis. Their pan head taper is 120 degrees (standard pan heads are 90 degrees), making them the optimal shape for 1.5mm thick MS2.0 aluminum chassis. Made of steel, they enable precise part fixation through high-precision...
CHF 13.90
En stock
+ −
M3x8 High Precision FH Screw (120°) MS2.0 4Stk.
YOK-ZC-F38SH
These FH socket screws are designed for use with MS2.0 aluminum chassis. Their pan head taper is 120 degrees (standard pan heads are 90 degrees), making them the optimal shape for 1.5mm thick MS2.0 aluminum chassis. Made of steel, they enable precise part fixation through high-precision...
CHF 6.90
En stock
+ −
M3x8 High Precision FH Screw (120°) MS2.0 10Stk.
YOK-ZC-F38SH-10
These FH socket screws are designed for use with MS2.0 aluminum chassis. Their pan head taper is 120 degrees (standard pan heads are 90 degrees), making them the optimal shape for 1.5mm thick MS2.0 aluminum chassis. Made of steel, they enable precise part fixation through high-precision...
CHF 13.90
En stock
+ −
Bando 120T Riemen MS2.0
YOK-BD-360LB
This is a BANDO brand drive belt for the MS2.0. It uses a stiffer material than standard belts, significantly enhancing durability. It resists tooth slippage even when used with high-power motors like those in the Modified category, ensuring reliable power transmission. It has 120 teeth and is...
CHF 12.90
En stock
+ −
High Precision FH Screw Set (120°/31pcs) MS2.0
YOK-MS-SSA20
The aluminium chassis is ideal for high-grip surfaces, such as carpet. However, the MS2.0 aluminium chassis has a reduced plate thickness of 1.5 mm, allowing for greater flexibility in setup. Standard flat-head screws protrude beyond the chassis surface due to their 90-degree head taper, which...
CHF 39.90
Fan Shroud for S4-CFMA Fan Mount
YOK-MO-FSL
This is a fan shroud for the MO series. It enhances the efficiency of the motor cooling fan, enabling power delivery even under demanding conditions. Compatible with 30mm fans, the range includes types compatible with two types of cooling fan mounts for the MO series
CHF 12.90
En stock
+ −
Fan Shroud for S4-CFMU Fan Mount
YOK-MO-FSU
CHF 12.90
En stock
+ −
MO3.0 Alu Centre Bone 47mm (Front/for COL Slipper)
YOK-MO-010B47A
CHF 10.90
En stock
+ −
MO3.0 Alu Center Bone 65mm (Front/for Centre Diff)
YOK-MO-010B65A
CHF 10.90
En stock
+ −
Alu Front Sus-Mount RO/SO Series (0/up+1mm)
YOK-SO-300FLA
CHF 22.90
En stock
+ −
Cooling Fan for RPX4 ESC
YOK-BL-RPX4CF
CHF 16.50
En stock
+ −
Hard-Coated Aluminium Suspension Ball Set MS2.0
YOK-MS-B60AS
CHF 21.90
En stock
+ −
Steel Wrench (8mm)
YOK-YT-303
CHF 10.90
En stock
+ −
Wide Drive Belt for MD3.0 (48T/5.0mm width)
YOK-MD-144LW
This wide-type drive belt further enhances throttle response on the MD3.0. With a width of 5mm ‒ equivalent to 1.6 times the standard 3mm width ‒ it reduces belt stretch for an even more direct feel. It also minimises belt skipping, improving durability. Applying slightly more tension to the...
CHF 9.90
En stock
+ −
Graphite Molded Rear Shock Tower/Rear Upper Mount
YOK-RO-018RDG
This is a rear shock tower for the RO2.0 model. Using high-strength, graphite-infused resin for the rear shock tower and upper arm mounts, where suspension forces are transmitted, improves suspension responsiveness, enhancing rear traction and increasing crash resistance.
CHF 18.90
En stock
+ −
Nouveau
Aluminium Idler Gear Post für MD3.0
YOK-MD-303P
This is an aluminum post that holds the MD3.0 counter gear. The gear mounting section is Φ5mm with a length of 10mm.
CHF 3.90
Nouveau
MS Series Aluminum Gear Differential Case O-Ring
YOK-MS-503GO-1
O-ring for MS1.0/2.0 aluminum gear differential cases. Installs on the cap retaining screw to prevent oil leaks. For periodic replacement. Pack of 10.
CHF 2.90
En stock
+ −
Verfügbarkeit
Verfügbar beim Lieferanten
Abmessungen
Auswahlhilfe
Material
Prix
CHF
–
CHF
  • CHF 1.5
  • CHF 849
Reifen/Rad-Typ
Servo-Typ
Verwendung
Massstab
Motor / Antrieb
Einsatz
Anspruch
Lackierung
Fertigungsgrad
Max. Geschwindigkeit
Marke
Betriebsspannung