ERSATZTEIL-FINDER

Yokomo

Ordnen nach:
Empfohlen
96
Alu Front Steering Hub Carrier 12.5° YZ-4
YOK-Z4-413125A
 
CHF59.90
Auf Lager  
+ −
Alu Front Arm für MD1.0
YOK-MD-008FUA
CHF59.90
Auf Lager  
+ −
Aluminum main chassis for BD10
YOK-B10-002AA
Aluminum main chassis for BD10. It is heavier than graphite and can lower its center of gravity. It is especially effective for high grip situations such as carpet surfaces.
CHF124.90
Auf Lager  
+ −
Front One-Way Housing YD-4
YOK-Y4-641
 
CHF35.00
Auf Lager  
+ −
Alu F.Lower Sus.Mount 44mm (Chamfer) YZ-4
YOK-Z4-300FL4
 
CHF34.90
Auf Lager  
+ −
Rear C Clip Universal BD9/BD10
YOK-B9-010RAA
(44.5mm Aluminum bone)
CHF49.90
Auf Lager  
+ −
Multi Weight Plate BD9/BD10
YOK-B9-MWPA
YOKOMO immediately release a weight plate for BD9 which is designed for optimization of the left-right balance and low center of gravity for the BD9 platform.
CHF34.90
Auf Lager  
+ −
YOKOMO Steering Gyro YG-302V2
YOK-YG-302V2
This is a basic steering gyro that can be used in various categories including drift cars. Upgraded to V2 and has improved response than before, allowing for comfortable driving even on slippery roads. Can be used with transmitters and receivers with 2 or more channels, and is used by wiring...
CHF57.90
Auf Lager  
+ −
Lexanschere / Lexan Schere 160mm
YOK-YT-CS1A
Lexanschere Fluorine processing Scissor 160mm
CHF16.90
Auf Lager  
+ −
Bell crank (1mm longer/F8×F5 bearing assembled)
YOK-B7-202S1
 
CHF42.90
Auf Lager  
+ −
Alu Steering Block YD-4
YOK-Y4-415SC
 
CHF42.90
Auf Lager  
+ −
Aluminum Shock Cap Ball (Hard coat 4pcs)
YOK-YS-8BHA
entspricht: YS-8BH
CHF8.50
Auf Lager  
+ −
Gull Type Front Susp. Arm L/R (0) YZ-4
YOK-Z4-008FG
CHF8.90
Auf Lager  
+ −
SP-03DV2 Programmable brushless servo (Blue)
YOK-SP-03DV2BL
A blue Version of the high-spec Servo SP-03DV2, a favorite of many top drivers, is now abailable. It is compatible with a 7.4V power supply to maximize the performance of the brushless motor that is the key to its operation and while greatly improving basic performance, it also greatly improves...
AbmessungenStandard GetriebeMetall Servo-TypDigital/Brushless Servogewicht (g)49 HerstellerYokomo
CHF169.00
Auf Lager  
+ −
L5 Rear Suspension Arm graphite YZ4-SF
YOK-S4-008RL5A
entspricht: S4-008RL5
CHF13.90
Auf Lager  
+ −
Rotary Sensor Set Yokomo M2 Motor
YOK-RP-038A
entspricht: RP-038
CHF41.90
Auf Lager  
+ −
Alum.13 Shock Cap (2pcs.) for SO/MO2.0
YOK-S4-S813A
Aluminum shock cap with drain screw for easy assembly. Easy to quantify settings and absorb road impacts with increased operating efficiency.
CHF20.50
Auf Lager  
+ −
Aluminum X shock cap Bmax2/4
YOK-B2-S812AA
entspricht: B2-S812A
CHF12.20
Auf Lager  
+ −
Factory Team Alu Chassis BD11/BD10
YOK-B11-002FA
This aluminum main chassis is used in the BD11 Factory Team Edition. The chassis is made of hard aluminum material, but with bold wall cutting, mainly around the rear, to provide slightly more rear traction. Traditionally, aluminum chassis are used for high-grip surfaces such as carpet,...
CHF159.90
Auf Lager  
+ −
Alu Chassis BD12
YOK-B12-002A
CHF159.90
Auf Lager  
+ −
YZ-2 Alu Bell Crank Base
YOK-Z2-201BB3A
entspricht: Z2-201BB3
CHF21.50
Auf Lager  
+ −
MIP Pucks Bi-metal dogbone 67mm for YZ-2 Stock ver
YOK-Z2-18841
CHF79.90
Auf Lager  
+ −
Aluminum lightweight front steering block for YD-2
YOK-Y2-415SALA
It is a lightweight steering block that is about 20% lighter than the conventional one by shaping up the aluminum steering block that has been released so far. The upper and lower kingpin positions connected to the A arm are offset, and the kingpin axis can be tilted inward once without a...
CHF79.90
Auf Lager  
+ −
Drift spring set (6 Types) for RWD Drifting
YOK-D-180A
¦ YOKOMO have developed a new type of spring allowing for further fine tuning of your chassis to suit surface type and track layout!
CHF44.90
Auf Lager  
+ −
Aluminum Adj. Suspension Mount Set Blau RD2.0
YOK-RD-301ASBL
CHF79.90
Auf Lager  
+ −
B-Max II "Hard" Li-Po Compatible Main Chassis NEW
YOK-BM-002LH
 
CHF39.90
Auf Lager  
+ −
Adjustable Rear Lower Short H Suspension Arm set
YOK-Y2-008RASA
The new aluminum adjustable rear lower H arm, which you can apply to the conventional YD-2 / YD- 4 series,will be released at the end of July.
CHF99.90
Auf Lager  
+ −
Suspension mount messing separate 42.0mm-7.0gr.
YOK-B7-3120BSB
 
CHF39.90
Auf Lager  
+ −
Tubular Graphite Main Drive Shaft for YD-4MR
YOK-Y4-644GMR
 
CHF39.90
Auf Lager  
+ −
Ball Diff Kit YZ-2CA/DT/YZ-4 DP48 52T
YOK-Z2-500A
YZ-2CA/DT/YZ-4 DP48 52T Ball differential kit
CHF49.90
Auf Lager  
+ −
BD8/BD7'16 Gear Diff Unit
YOK-B8-500GS
 
CHF52.90
Auf Lager  
+ −
SLF Short Shock Set
YOK-B7-2014S
 
CHF79.00
Auf Lager  
+ −
Steering bell crank/Servo horn/Servo mount DTM3/CA
YOK-Z2-200-3A
entspricht: Z2-200-3
CHF19.90
Auf Lager  
+ −
Motor mount
YOK-B7-32L15
 
CHF38.90
Auf Lager  
+ −
Rear Universal Set (Bearing type)
YOK-MS-010RS
Universal Design with bearings mounted on the dogbones to reduce sliding resistance with the joint axle to the upmost limit. This reduces drive loss and stabilizes suspension operation, thereby increasing cornering speed.
CHF77.00
Auf Lager  
+ −
Wing Plate for Off-Road Car
YOK-Z2-110A
entspricht: Z2-110
CHF11.50
Auf Lager  
+ −
Alminum Suspension mount (44.9mm·Black)
YOK-B7-3149B
 
CHF21.90
Auf Lager  
+ −
Front brace for YZ-4 Narrow type
YOK-Z4-300FB2
 
CHF13.90
Auf Lager  
+ −
Gear Diff. Case (High capacity) CAL2
YOK-Z2-503GH2A
entspricht: Z2-503GH2
CHF11.50
Auf Lager  
+ −
Bellcrank /17mm horn/ Servo mount YZ-4
YOK-Z4-200
CHF18.90
Auf Lager  
+ −
Alu Suspension Mount Set F/R YD-4
YOK-Y4-301AS
 
CHF74.90
Auf Lager  
+ −
Graphite molded front sus-arm YZ2-DTM/CAL 3/3.1
YOK-Z2-008F3GA
entspricht: Z2-008F3G
CHF15.90
Auf Lager  
+ −
COROLLA Axio apr GT Body Set
YOK-GT-CAXBS
MaterialLexan Auswahlhilfe1:12 Massstab1:12 EinsatzOn-Road Lackierungunlackiert
CHF49.90
Auf Lager  
+ −
PANDEM 90 Light parts / Wing parts set
YOK-SD-PM90LWA
Light bracket parts and polycarbonate wing for the GR PANDEM 90 bodies are finally here! The fine details are made of high quality polycarbonate. The set comes with the following Headlight, taillight brackets and a 4-split rear wing.
CHF49.90
Auf Lager  
+ −
Front Lower Short T Arm für RD / SD Reihe
YOK-Y2-008FTBL
CHF49.90
Auf Lager  
+ −
Front upper arm mount
YOK-Z2-300FUA
entspricht: Z2-300FU
CHF22.90
Auf Lager  
+ −
O Ring cap/AJ Nut/Shock Cap Nut/AJO Ring
YOK-B9-S4C
CHF24.90
Auf Lager  
+ −
Body Set with Masking for YZ-870C
YOK-YZ-101
CHF49.60
Auf Lager  
+ −
Regler Programmierkarte für BL4 Serie
YOK-BL-YBP4
CHF32.90
Auf Lager  
+ −
Competition Capacitor (Non-Polarity)
YOK-BL-RCPA
entspricht: BL-RCP
CHF49.60
Auf Lager  
+ −
Brass Rear H Arm Weight Base (20g)
YOK-Y2-008RW20
This optional part for the RD2.0/SD2.0 combines an aluminum rear H-arm with a brass weight to systematically increase rear traction. By mounting the weight on the rigid aluminum H-arm, the unsprung weight, which is directly loaded on the rear tires, is increased, effectively increasing tire...
CHF47.90
Auf Lager  
+ −
YZ-2 Aluminum bell Crank (L/R)
YOK-Z2-201BA3A
entspricht: Z2-201BA3
CHF32.90
Auf Lager  
+ −
Alu Rear upper Arm mount YZ-2
YOK-Z2-300RUW
 
CHF46.90
Auf Lager  
+ −
Rear short ”X30” shock set for YZ-2DTM3/CAL3
YOK-S4-S1MA
A shock set that can be used for the rear of YZ-2DTM3/CAL3 and the front of YZ-2T. The shaft diameter is F3.0mm, which is thinner than the standard F3.3mm, and it is possible to reduce friction and increase the shock absorption effect.
CHF69.90
Auf Lager  
+ −
LMR 27 Rear Wing
YOK-Z2-CAL2WA
entspricht: Z2-CAL2W
CHF14.90
Auf Lager  
+ −
Yokomo Pit Bag IV
YOK-YT-24BK4
Hand-held pit bag convenient for storing machines and peripheral equipment, with a large capacity to hold a 1/10-size drift car with the body attached, and a two-tiered inner box. Outer dimensions: about 26 x 31 x 52 cm Inner box dimensions: about 246 x 146 x 482 mm
CHF69.90
Auf Lager  
+ −
YD-2/BD8 Brass Sus holder B (43.5~46.7mm)
YOK-TS-2150
Please be announced the new items made by brass for BD-8 and YD-2 series.
CHF27.90
Auf Lager  
+ −
Aluminum Separate Suspension Mount (43.5mm)
YOK-B7-3135BS
 
CHF19.90
Auf Lager  
+ −
Rear Wheel
YOK-B4-827A
entspricht: B4-827
CHF6.40
Auf Lager  
+ −
Gear Diff 40T Ring Gear (for S4-503D16) YZ4-SF
YOK-S4-503R16A
entspricht: S4-503R16
CHF34.50
Auf Lager  
+ −
Aluminum Rear Hub Carrier L/R for SO Series
YOK-SO-415RA
CHF45.90
Auf Lager  
+ −
Alu Motor mount inkl. Fan YD-2
YOK-Y2-304SFA
entspricht: Y2-304SF
CHF49.90
Auf Lager  
+ −
HVF Shock shaft (19.1mm/Heavy fluorine coat) BD9
YOK-B9-S5SHVFA
entspricht: B9-S5SHVF
CHF27.50
Auf Lager  
+ −
L5 Rear Suspension Arm YZ-4
YOK-Z4-008RL5
CHF9.65
Auf Lager  
+ −
Titanium Turn Buckle Set (9pcs)
YOK-B7-TBSA
CHF45.90
Auf Lager  
+ −
Aluminum Rear Hub Carrier RTC BD11
YOK-B11-RTC-3
Aluminum rear hub carrier that can be used for BD10/11. It is a hub carrier for the RTC (rear toe control system) that is standard on the BD11, and by setting the angle of the kingpin to 4 degrees, which is an increase from the standard reverse caster 2 degrees, it is possible to control...
CHF43.90
Auf Lager  
+ −
Graphite Steering Block BD9/BD10
YOK-B9-415SGA
entspricht: B9-415SG
CHF14.50
Auf Lager  
+ −
Alu Front Bumper Brace YD2/YD4
YOK-Y2-001BA
 
CHF32.90
Auf Lager  
+ −
Racing Performer M3 Motor 4.5T
YOK-RPM-TC45
Motor / AntriebElektro Brushless-Motor HerstellerYokomo
CHF129.90
Auf Lager  
+ −
Gear differential set for BD10
YOK-B10-500GSA
A gear differential set used for the rear differential of BD10. # 7500 differential oil is included with the gear differential assembly.
CHF52.90
Auf Lager  
+ −
Racing Performer M3 Motor 5.5T
YOK-RPM-4W55
Motor / AntriebElektro Brushless-Motor HerstellerYokomo
CHF129.90
Auf Lager  
+ −
Racing Performer M3 Motor 13.5T
YOK-RPM-J135
Motor / AntriebElektro Brushless-Motor HerstellerYokomo
CHF129.90
Auf Lager  
+ −
Adjustable Suspension Mount Set
YOK-Y2-301ACA
entspricht: Y2-301AC
CHF89.90
Auf Lager  
+ −
Racing Performer M3 Motor 13.5T
YOK-RPM-4W135
Motor / AntriebElektro Brushless-Motor HerstellerYokomo
CHF129.90
Auf Lager  
+ −
Titanium Screw Set for SO2.0
YOK-RP-115
This set allows the 104 screws used in the Super Off-Road SO2.0 to be made of titanium. All titanium screws are manufactured by high-precision cutting, so they are well finished when the machine is assembled, allowing for a solid machine build.
CHF129.90
Auf Lager  
+ −
Racing Performer HYPER cooling fan (30mm size comp
YOK-RP-033A
entspricht: RP-033
CHF22.90
Auf Lager  
+ −
Front double joint univ. shaft (with Bearing) YZ-4
YOK-Z4-010FW
 
CHF64.90
Auf Lager  
+ −
Alu rear hub carrier (Toe-in 1.0°) for B-MAX4III
YOK-B4-415R10
 
CHF42.90
Auf Lager  
+ −
Karosseriehalter magnetisch hinten
YOK-Y2-016MGRA
Magnet type rear body mount. Attach the aluminum mount post to the rear from the rear shock tower and attach the steel adapter. Even if the body is lifted, it can be firmly fixed so that it will not come off the chassis, and it is safe even if it vibrates or crashes while driving.
CHF28.90
Auf Lager  
+ −
Graphite Molded Front Bulkhead for RO/SO
YOK-Z2-002BG
This stabilizer set controls the roll of the RS1.0 and improves its turning performance on high-grip surfaces and other surfaces to enhance driving performance. It comes as a front and rear set, with 3 types of stabilizer bars from 1.2mm to 1.4mm, so you can enjoy setting it up according to the...
CHF12.80
Auf Lager  
+ −
Steering bell crank (with bearing) for BD8-2018
YOK-B8-202SS
CHF63.90
Auf Lager  
+ −
"X33" shock X ring
YOK-Z2-S3XA
entspricht: Z2-S3X
CHF6.50
Auf Lager  
+ −
Graphite molded L5/LD rear sus-Arm YZ-4SF2/YZ-2
YOK-S4-008R5GA
For YZ-4SF2/YZ-2CAL DTM3 and 3.1
CHF15.90
Auf Lager  
+ −
Steering Limiter Screw 8/8.5/9 stck je
YOK-B7-201LS
CHF21.00
Auf Lager  
+ −
YD-2 Aluminum UL Front Axle (adjustable range 5mm~
YOK-Y2-010FHA
YD-2 Aluminum UL Front Axle (adjustable range 5mm~9mm)
CHF25.90
Auf Lager  
+ −
Alu Transmission Case (edge trimmed) upper YD-4
YOK-Y4-302UC
 
CHF62.90
Auf Lager  
+ −
Yokomo Muffler Cutter
YOK-SD-ACMC2A
entspricht: SD-ACMC2
CHF8.90
Auf Lager  
+ −
“X30” 13 shock set (rear)
YOK-S4-S1L13
This is a F13mm big bore shock set. The L size is ideal for the rear of the SO/MO series, and the shaft diameter is 3.0mm.
CHF62.90
Auf Lager  
+ −
Full counter solid axle set (Rear×1.5/Blue)
YOK-IB-FCD15
 
CHF41.90
Auf Lager  
+ −
M4 Serrated Flange Nut 11mm dünn 4stk.
YOK-ZC-N4FLTA
entspricht: ZC-N4FLT
CHF8.90
Auf Lager  
+ −
Bell Crank (8x5 bearing assembled)
YOK-B7-202SBA
 
CHF41.90
Auf Lager  
+ −
Alu Chassis für BDFWD/BD10F
YOK-BD-002FA
CHF124.90
Auf Lager  
+ −
Front/Rear Sway Bar Set for RS1.0
YOK-RS-412
This stabilizer set controls the roll of the RS1.0 and improves its turning performance on high-grip surfaces and other surfaces to enhance driving performance. It comes as a front and rear set, with 3 types of stabilizer bars from 1.2mm to 1.4mm, so you can enjoy setting it up according to the...
CHF41.00
Auf Lager  
+ −
Graphite Battery Holder set for BD10
YOK-B10-118GA
entspricht: B10-118G
CHF47.90
Auf Lager  
+ −
Carbon Graphite main chassis YD-4MR
YOK-Y4-002MR
 
CHF119.90
Auf Lager  
+ −
DX1R series Brushless motor (10.5T) rot
YOK-RPM-DX105RR
The DX1 Type-R motor, one of the most popular brushless motors for drifting, is now available in a new color anodized version! The two color variations are of course red anodized and purple anodized, which best match the YD-2 series, and of course, match the chassis perfectly. This is a...
CHF119.90
Auf Lager  
+ −
Verfügbarkeit
Verfügbar beim Lieferanten
Abmessungen
Auswahlhilfe
Material
Preis

CHF  –  CHF

  • ‎CHF1.5
  • ‎CHF999
Reifen/Rad-Typ
Servo-Typ
Verwendung
Massstab
Motor / Antrieb
Einsatz
Anspruch
Lackierung
Fertigungsgrad
Max. Geschwindigkeit
Marke
Betriebsspannung
Zurücksetzen (reset)