ERSATZTEIL-FINDER

Yokomo

Ordnen nach:
Empfohlen
96
Rear C Clip Universal BD9/BD10
YOK-B9-010RAA
(44.5mm Aluminum bone)
CHF49.90
Auf Lager  
+ −
ZERO-S DRIFT Blushless motor 10.5T Black
YOK-YM-S105DBA
Basic brushless motor for drifting "ZERO-S" series! We also have red and purple color alumite specifications, which have been requested by many users, and are the best match with the colors of the YD-2 series. Although it has a slightly torque type output characteristic, it has a smoother...
Motor / AntriebElektro Brushless-Motor HerstellerYokomo
CHF89.90
Auf Lager  
+ −
Lexanschere / Lexan Schere 160mm
YOK-YT-CS1A
Lexanschere Fluorine processing Scissor 160mm
CHF16.90
Auf Lager  
+ −
SLF Aluminum Big Bore shock set for YD-2
YOK-Y2-SBBSA
Super low friction aluminum big bore shock set for YD-2. The cylinder diameter is wider than the conventional shock, and the shock length is also newly designed for drifting. The maximum capacity for on-road shocks enhances the sense of stability. The cylinder is also treated with Kashima Coat...
CHF89.90
Auf Lager  
+ −
Teams Alu Achsschenkel hinten 3teilig für YD2
YOK-Y2-415ART
This aluminum rear hub carrier can be used commonly with the YD-2 series. The universal shaft with a short axle shaft for narrow scrubs is used, and the universal joint pin is positioned as far outward as possible, closer to the outer suspension arm pin, to activate the suspension movement and...
CHF89.90
Auf Lager  
+ −
Aluminum Shock Cap Ball (Hard coat 4pcs)
YOK-YS-8BHA
entspricht: YS-8BH
CHF8.50
Auf Lager  
+ −
Alum.Main Chassis for SO2.0
YOK-Z2-002S2
CHF89.90
Auf Lager  
+ −
Slide Rack Set for RD1.0/2.0
YOK-RD-202SR
Slide rack set for use with RD1.0 and 2.0 to further increase the cutting angle.Use the mount on the servo rear side that comes standard with the kit.
CHF89.90
Auf Lager  
+ −
L5 Rear Suspension Arm graphite YZ4-SF
YOK-S4-008RL5A
entspricht: S4-008RL5
CHF13.90
Auf Lager  
+ −
Aluminum SLF Big Bore Shock Set Blue
YOK-Y2-SBBSBL
Super low friction aluminum big bore shock set in blue anodized aluminum color. The cylinder diameter is wider than conventional shocks and the shock length is newly designed for drifting. Large capacity and increased stability.
CHF89.90
Auf Lager  
+ −
Aluminum X shock cap Bmax2/4
YOK-B2-S812AA
entspricht: B2-S812A
CHF12.20
Auf Lager  
+ −
Alu Front Steering Hub Carrier 12.5° YZ-4
YOK-Z4-413125A
 
CHF59.90
Auf Lager  
+ −
Alu Front Arm für MD1.0
YOK-MD-008FUA
CHF59.90
Auf Lager  
+ −
YZ-2 Alu Bell Crank Base
YOK-Z2-201BB3A
entspricht: Z2-201BB3
CHF21.50
Auf Lager  
+ −
Alu Rear Weight H Arm Purple für RD2.0/SD2.0
YOK-Y2-P08RAW
CHF59.90
Auf Lager  
+ −
Front One-Way Housing YD-4
YOK-Y4-641
 
CHF35.00
Auf Lager  
+ −
Drift spring set (6 Types) for RWD Drifting
YOK-D-180A
¦ YOKOMO have developed a new type of spring allowing for further fine tuning of your chassis to suit surface type and track layout!
CHF44.90
Auf Lager  
+ −
Graphite molded front sus-arm YZ2-DTM/CAL 3/3.1
YOK-Z2-008F3GA
entspricht: Z2-008F3G
CHF15.90
Auf Lager  
+ −
Alu F.Lower Sus.Mount 44mm (Chamfer) YZ-4
YOK-Z4-300FL4
 
CHF34.90
Auf Lager  
+ −
Adjustable Rear Lower Short H Suspension Arm set
YOK-Y2-008RASA
The new aluminum adjustable rear lower H arm, which you can apply to the conventional YD-2 / YD- 4 series,will be released at the end of July.
CHF99.90
Auf Lager  
+ −
Multi Weight Plate BD9/BD10
YOK-B9-MWPA
YOKOMO immediately release a weight plate for BD9 which is designed for optimization of the left-right balance and low center of gravity for the BD9 platform.
CHF34.90
Auf Lager  
+ −
YOKOMO Steering Gyro YG-302V2
YOK-YG-302V2
This is a basic steering gyro that can be used in various categories including drift cars. Upgraded to V2 and has improved response than before, allowing for comfortable driving even on slippery roads. Can be used with transmitters and receivers with 2 or more channels, and is used by wiring...
CHF57.90
Auf Lager  
+ −
Ball Diff Kit YZ-2CA/DT/YZ-4 DP48 52T
YOK-Z2-500A
YZ-2CA/DT/YZ-4 DP48 52T Ball differential kit
CHF49.90
Auf Lager  
+ −
Bell crank (1mm longer/F8×F5 bearing assembled)
YOK-B7-202S1
 
CHF42.90
Auf Lager  
+ −
Alu Steering Block YD-4
YOK-Y4-415SC
 
CHF42.90
Auf Lager  
+ −
Steering bell crank/Servo horn/Servo mount DTM3/CA
YOK-Z2-200-3A
entspricht: Z2-200-3
CHF19.90
Auf Lager  
+ −
Neu
Aluminium Suspension Mount Set für RS1.0/RS2.0
YOK-RS-301AS
This aluminum suspension mount is commonly used for the RS series. The rear mount is basically designed to have the same width as the standard one, but the rear rear suspension toe angle can be changed by interchanging the two types of bushings. The kit standard (3 degree) bushing is the center...
CHF84.90
Auf Lager  
+ −
Gull Type Front Susp. Arm L/R (0) YZ-4
YOK-Z4-008FG
CHF8.90
Auf Lager  
+ −
Wing Plate for Off-Road Car
YOK-Z2-110A
entspricht: Z2-110
CHF11.50
Auf Lager  
+ −
Rotary Sensor Set Yokomo M2 Motor
YOK-RP-038A
entspricht: RP-038
CHF41.90
Auf Lager  
+ −
Alum.13 Shock Cap (2pcs.) for SO/MO2.0
YOK-S4-S813A
Aluminum shock cap with drain screw for easy assembly. Easy to quantify settings and absorb road impacts with increased operating efficiency.
CHF20.50
Auf Lager  
+ −
Gear Diff. Case (High capacity) CAL2
YOK-Z2-503GH2A
entspricht: Z2-503GH2
CHF11.50
Auf Lager  
+ −
Factory Team Alu Chassis BD11/BD10
YOK-B11-002FA
This aluminum main chassis is used in the BD11 Factory Team Edition. The chassis is made of hard aluminum material, but with bold wall cutting, mainly around the rear, to provide slightly more rear traction. Traditionally, aluminum chassis are used for high-grip surfaces such as carpet,...
CHF159.90
Auf Lager  
+ −
Alu Chassis BD12
YOK-B12-002A
CHF159.90
Auf Lager  
+ −
Front upper arm mount
YOK-Z2-300FUA
entspricht: Z2-300FU
CHF22.90
Auf Lager  
+ −
MIP Pucks Bi-metal dogbone 67mm for YZ-2 Stock ver
YOK-Z2-18841
CHF79.90
Auf Lager  
+ −
Regler Programmierkarte für BL4 Serie
YOK-BL-YBP4
CHF32.90
Auf Lager  
+ −
Aluminum lightweight front steering block for YD-2
YOK-Y2-415SALA
It is a lightweight steering block that is about 20% lighter than the conventional one by shaping up the aluminum steering block that has been released so far. The upper and lower kingpin positions connected to the A arm are offset, and the kingpin axis can be tilted inward once without a...
CHF79.90
Auf Lager  
+ −
Aluminum Adj. Suspension Mount Set Blau RD2.0
YOK-RD-301ASBL
CHF79.90
Auf Lager  
+ −
YZ-2 Aluminum bell Crank (L/R)
YOK-Z2-201BA3A
entspricht: Z2-201BA3
CHF32.90
Auf Lager  
+ −
B-Max II "Hard" Li-Po Compatible Main Chassis NEW
YOK-BM-002LH
 
CHF39.90
Auf Lager  
+ −
Suspension mount messing separate 42.0mm-7.0gr.
YOK-B7-3120BSB
 
CHF39.90
Auf Lager  
+ −
LMR 27 Rear Wing
YOK-Z2-CAL2WA
entspricht: Z2-CAL2W
CHF14.90
Auf Lager  
+ −
Tubular Graphite Main Drive Shaft for YD-4MR
YOK-Y4-644GMR
 
CHF39.90
Auf Lager  
+ −
BD8/BD7'16 Gear Diff Unit
YOK-B8-500GS
 
CHF52.90
Auf Lager  
+ −
Rear Wheel
YOK-B4-827A
entspricht: B4-827
CHF6.40
Auf Lager  
+ −
Yokomo Pit Mat 100x60cm
YOK-YT-PM26A
Yokomo's pit mat is ideal for pit work on circuits. With a width of 100 cm and a depth of 60 cm, the surface has a smooth satin-like feel, and the Yokomo Racing Factory print logo is placed large to create a competitive image. The back side is made of rubber material to prevent slippage...
CHF52.90
Auf Lager  
+ −
SLF Short Shock Set
YOK-B7-2014S
 
CHF79.00
Auf Lager  
+ −
Alu Motor mount inkl. Fan YD-2
YOK-Y2-304SFA
entspricht: Y2-304SF
CHF49.90
Auf Lager  
+ −
Motor mount
YOK-B7-32L15
 
CHF38.90
Auf Lager  
+ −
Rear Universal Set (Bearing type)
YOK-MS-010RS
Universal Design with bearings mounted on the dogbones to reduce sliding resistance with the joint axle to the upmost limit. This reduces drive loss and stabilizes suspension operation, thereby increasing cornering speed.
CHF77.00
Auf Lager  
+ −
YD-2 Aluminum UL Front Axle (adjustable range 5mm~
YOK-Y2-010FHA
YD-2 Aluminum UL Front Axle (adjustable range 5mm~9mm)
CHF25.90
Auf Lager  
+ −
Alminum Suspension mount (44.9mm·Black)
YOK-B7-3149B
 
CHF21.90
Auf Lager  
+ −
Front brace for YZ-4 Narrow type
YOK-Z4-300FB2
 
CHF13.90
Auf Lager  
+ −
Titanium Turn Buckle Set (9pcs)
YOK-B7-TBSA
CHF45.90
Auf Lager  
+ −
Bellcrank /17mm horn/ Servo mount YZ-4
YOK-Z4-200
CHF18.90
Auf Lager  
+ −
Alu Suspension Mount Set F/R YD-4
YOK-Y4-301AS
 
CHF74.90
Auf Lager  
+ −
Graphite Steering Block BD9/BD10
YOK-B9-415SGA
entspricht: B9-415SG
CHF14.50
Auf Lager  
+ −
Pandem Nissan Fairlady Z RZ34 1:10
YOK-SD-RZ34B
The new body Pandem Nissan Fairlady RZ34 for drifting is now available! The sharp nose and massive form create a powerful silhoutte and the Pandem Spoiler and aero parts create a massive atmosphere. The one-piece molded polycarbonate body easily creates a powerful body. A two-piece light...
MaterialLexan Auswahlhilfe190mm Touring Massstab1:10 EinsatzOn-Road Drift Lackierungunlackiert
CHF74.90
Auf Lager  
+ −
Gear differential set for BD10
YOK-B10-500GSA
A gear differential set used for the rear differential of BD10. # 7500 differential oil is included with the gear differential assembly.
CHF52.90
Auf Lager  
+ −
COROLLA Axio apr GT Body Set
YOK-GT-CAXBS
MaterialLexan Auswahlhilfe1:12 Massstab1:12 EinsatzOn-Road Lackierungunlackiert
CHF49.90
Auf Lager  
+ −
PANDEM 90 Light parts / Wing parts set
YOK-SD-PM90LWA
Light bracket parts and polycarbonate wing for the GR PANDEM 90 bodies are finally here! The fine details are made of high quality polycarbonate. The set comes with the following Headlight, taillight brackets and a 4-split rear wing.
CHF49.90
Auf Lager  
+ −
Front Lower Short T Arm für RD / SD Reihe
YOK-Y2-008FTBL
CHF49.90
Auf Lager  
+ −
Adjustable Suspension Mount Set
YOK-Y2-301ACA
entspricht: Y2-301AC
CHF89.90
Auf Lager  
+ −
O Ring cap/AJ Nut/Shock Cap Nut/AJO Ring
YOK-B9-S4C
CHF24.90
Auf Lager  
+ −
Body Set with Masking for YZ-870C
YOK-YZ-101
CHF49.60
Auf Lager  
+ −
Racing Performer HYPER cooling fan (30mm size comp
YOK-RP-033A
entspricht: RP-033
CHF22.90
Auf Lager  
+ −
Competition Capacitor (Non-Polarity)
YOK-BL-RCPA
entspricht: BL-RCP
CHF49.60
Auf Lager  
+ −
Alu C-hub Carrier for RTC (BD8 und BD7)
YOK-B8-RTC-15
The new C-hub carrier is made by high quality aluminum made and designed with new cantilever type for more light weight while having sufficient strength.
CHF47.90
Auf Lager  
+ −
Alu Rear upper Arm mount YZ-2
YOK-Z2-300RUW
 
CHF46.90
Auf Lager  
+ −
Brass Rear H Arm Weight Base (20g)
YOK-Y2-008RW20
This optional part for the RD2.0/SD2.0 combines an aluminum rear H-arm with a brass weight to systematically increase rear traction. By mounting the weight on the rigid aluminum H-arm, the unsprung weight, which is directly loaded on the rear tires, is increased, effectively increasing tire...
CHF47.90
Auf Lager  
+ −
Rear short ”X30” shock set for YZ-2DTM3/CAL3
YOK-S4-S1MA
A shock set that can be used for the rear of YZ-2DTM3/CAL3 and the front of YZ-2T. The shaft diameter is F3.0mm, which is thinner than the standard F3.3mm, and it is possible to reduce friction and increase the shock absorption effect.
CHF69.90
Auf Lager  
+ −
Karosseriehalter magnetisch hinten
YOK-Y2-016MGRA
Magnet type rear body mount. Attach the aluminum mount post to the rear from the rear shock tower and attach the steel adapter. Even if the body is lifted, it can be firmly fixed so that it will not come off the chassis, and it is safe even if it vibrates or crashes while driving.
CHF28.90
Auf Lager  
+ −
YD-2/BD8 Brass Sus holder B (43.5~46.7mm)
YOK-TS-2150
Please be announced the new items made by brass for BD-8 and YD-2 series.
CHF27.90
Auf Lager  
+ −
Plastic Bevel Gear Dif Assy (with Aluminum Drive c
YOK-Y2-500GSAA
entspricht: Y2-500GSA
CHF49.90
Nicht auf Lager
Aluminum Separate Suspension Mount (43.5mm)
YOK-B7-3135BS
 
CHF19.90
Auf Lager  
+ −
Gear Diff 40T Ring Gear (for S4-503D16) YZ4-SF
YOK-S4-503R16A
entspricht: S4-503R16
CHF34.50
Auf Lager  
+ −
"X33" shock X ring
YOK-Z2-S3XA
entspricht: Z2-S3X
CHF6.50
Auf Lager  
+ −
Aluminum Rear Hub Carrier L/R for SO Series
YOK-SO-415RA
CHF45.90
Auf Lager  
+ −
HVF Shock shaft (19.1mm/Heavy fluorine coat) BD9
YOK-B9-S5SHVFA
entspricht: B9-S5SHVF
CHF27.50
Auf Lager  
+ −
Aluminum cramp servo horn 20mm (for FUTABA)
YOK-ZC-204520A
entspricht: ZC-204520
CHF17.90
Nicht auf Lager
L5 Rear Suspension Arm YZ-4
YOK-Z4-008RL5
CHF9.65
Auf Lager  
+ −
Aluminum Rear Hub Carrier RTC BD11
YOK-B11-RTC-3
Aluminum rear hub carrier that can be used for BD10/11. It is a hub carrier for the RTC (rear toe control system) that is standard on the BD11, and by setting the angle of the kingpin to 4 degrees, which is an increase from the standard reverse caster 2 degrees, it is possible to control...
CHF43.90
Auf Lager  
+ −
Alu Front Bumper Brace YD2/YD4
YOK-Y2-001BA
 
CHF32.90
Auf Lager  
+ −
M4 Serrated Flange Nut 11mm dünn 4stk.
YOK-ZC-N4FLTA
entspricht: ZC-N4FLT
CHF8.90
Auf Lager  
+ −
Racing Performer M3 Motor 4.5T
YOK-RPM-TC45
Motor / AntriebElektro Brushless-Motor HerstellerYokomo
CHF129.90
Auf Lager  
+ −
Racing Performer M3 Motor 5.5T
YOK-RPM-4W55
Motor / AntriebElektro Brushless-Motor HerstellerYokomo
CHF129.90
Auf Lager  
+ −
Yokomo Muffler Cutter
YOK-SD-ACMC2A
entspricht: SD-ACMC2
CHF8.90
Auf Lager  
+ −
Racing Performer M3 Motor 13.5T
YOK-RPM-J135
Motor / AntriebElektro Brushless-Motor HerstellerYokomo
CHF129.90
Auf Lager  
+ −
Racing Performer M3 Motor 13.5T
YOK-RPM-4W135
Motor / AntriebElektro Brushless-Motor HerstellerYokomo
CHF129.90
Auf Lager  
+ −
Graphite Battery Holder set for BD10
YOK-B10-118GA
entspricht: B10-118G
CHF47.90
Auf Lager  
+ −
Titanium Screw Set for SO2.0
YOK-RP-115
This set allows the 104 screws used in the Super Off-Road SO2.0 to be made of titanium. All titanium screws are manufactured by high-precision cutting, so they are well finished when the machine is assembled, allowing for a solid machine build.
CHF129.90
Auf Lager  
+ −
Front double joint univ. shaft (with Bearing) YZ-4
YOK-Z4-010FW
 
CHF64.90
Auf Lager  
+ −
Alu Shim 3x6x1.0mm (Black)
YOK-ZC-A3610BA
entspricht: ZC-A3610B
CHF5.90
Auf Lager  
+ −
Fahrzeug Tasche Team Yokomo
YOK-YT-28MB
A new hand-carry bag with the Yokomo logo is now available for transporting your machine to the race track. The bag is large enough to hold not only touring cars and drift cars, but also wide off-road cars. The bag is also equipped with a belt to easily hold the machine for safe...
CHF64.90
Auf Lager  
+ −
Alu rear hub carrier (Toe-in 1.0°) for B-MAX4III
YOK-B4-415R10
 
CHF42.90
Auf Lager  
+ −
Verfügbarkeit
Verfügbar beim Lieferanten
Abmessungen
Auswahlhilfe
Material
Preis

CHF  –  CHF

  • ‎CHF1.5
  • ‎CHF949
Reifen/Rad-Typ
Servo-Typ
Verwendung
Massstab
Motor / Antrieb
Einsatz
Anspruch
Lackierung
Fertigungsgrad
Max. Geschwindigkeit
Marke
Betriebsspannung
Zurücksetzen (reset)