Français (CH)
ERSATZTEIL-FINDER

Yokomo

Trier par:
Recommandé
Montrer:
96
Alu Shim 3x6x1.0mm (Black)
YOK-ZC-A3610BA
entspricht: ZC-A3610B
CHF 5.90
En stock
+ −
Aluminum Rear Hub Carrier RTC BD11
YOK-B11-RTC-3
Aluminum rear hub carrier that can be used for BD10/11. It is a hub carrier for the RTC (rear toe control system) that is standard on the BD11, and by setting the angle of the kingpin to 4 degrees, which is an increase from the standard reverse caster 2 degrees, it is possible to control...
CHF 43.90
En stock
+ −
Bearing F5 x F10 x 4mm
YOK-BB-105-2A
entspricht: BB-105-2
CHF 6.90
En stock
+ −
Aluminium Center Pulley 21T MS2.0
YOK-MS-630-2
CHF 43.90
En stock
+ −
Alu Front Bumper Brace YD2/YD4
YOK-Y2-001BA
 
CHF 32.90
En stock
+ −
Alu Rear Suspension Mount in Rear (w. S4-300BS)
YOK-Z2-300RR4A
entspricht: Z2-300RR4
CHF 22.90
En stock
+ −
Titanium Screw Set for SO2.0
YOK-RP-115
This set allows the 104 screws used in the Super Off-Road SO2.0 to be made of titanium. All titanium screws are manufactured by high-precision cutting, so they are well finished when the machine is assembled, allowing for a solid machine build.
CHF 129.90
En stock
+ −
Front double joint univ. shaft (with Bearing) YZ-4
YOK-Z4-010FW
 
CHF 64.90
En stock
+ −
Rear“X30”shock set
YOK-S4-S1LA
entspricht: S4-S1L
CHF 69.90
En stock
+ −
Alu rear hub carrier (Toe-in 1.0°) for B-MAX4III
YOK-B4-415R10
 
CHF 42.90
En stock
+ −
Aluminium Servohalter MS2.0
YOK-MS-203-2
CHF 63.90
En stock
+ −
Program card for SP-02DV2/SP-03DV2 servo
YOK-SP-03DPC-1
This is a dedicated programmer that can be connected to programmable servos such as SP-02DV2/SP-03DV2 for drifting and rewrite settings. The main unit is powered from a USB connector, etc., and by connecting the servo cable directly, the power, torque, hunting suppression value,...
CHF 34.90
En stock
+ −
Steering Limiter Screw 8/8.5/9 stck je
YOK-B7-201LS
CHF 21.00
En stock
+ −
Alu Transmission Case (edge trimmed) upper YD-4
YOK-Y4-302UC
 
CHF 62.90
En stock
+ −
Front“X30”shock shaft (Titanium coat)
YOK-S4-S2STA
entspricht: S4-S2ST
CHF 15.90
En stock
+ −
Center gear diff set for YZ-4SF2
YOK-S4-504-2A
entspricht: S4-504-2
CHF 62.90
En stock
+ −
“X30” 13 shock set (rear)
YOK-S4-S1L13
This is a F13mm big bore shock set. The L size is ideal for the rear of the SO/MO series, and the shaft diameter is 3.0mm.
CHF 62.90
En stock
+ −
Gear differential drive cup (Steel) for MR/RS
YOK-B2-501GSA
entspricht: B2-501GS
CHF 13.90
En stock
+ −
Full counter solid axle set (Rear×1.5/Blue)
YOK-IB-FCD15
 
CHF 41.90
En stock
+ −
Bell Crank (8x5 bearing assembled)
YOK-B7-202SBA
 
CHF 41.90
En stock
+ −
Univ. Drive Shaft 49mm YD-2
YOK-Y2-010A
entspricht: Y2-010
CHF 32.50
En stock
+ −
Alu Chassis für BDFWD/BD10F
YOK-BD-002FA
CHF 124.90
En stock
+ −
Graphite Front ST Hub Carieer BD9/BD10
YOK-B9-413GA
entspricht: B9-413G
CHF 14.90
En stock
+ −
Alum.Steering Block Set (2pcs.) for MS1.0
YOK-MS-415AS
This aluminum steering block improves machine response and traction by replacing the plastic steering block.Graphite arm plates provide ample rigidity, and by replacing the plates up and down, various bump steer settings are possible. Each product comes in a pack of two, but the aluminum...
CHF 61.60
En stock
+ −
Front/Rear Sway Bar Set for RS1.0
YOK-RS-412
This stabilizer set controls the roll of the RS1.0 and improves its turning performance on high-grip surfaces and other surfaces to enhance driving performance. It comes as a front and rear set, with 3 types of stabilizer bars from 1.2mm to 1.4mm, so you can enjoy setting it up according to the...
CHF 41.00
En stock
+ −
Gear Differential Set
YOK-B9-500GS
(38T)
CHF 49.90
En stock
+ −
Carbon Graphite main chassis YD-4MR
YOK-Y4-002MR
 
CHF 119.90
En stock
+ −
SD1.0/YD-2Z/YD-2ZS Alu Chassis
YOK-Y2-002AL
This aluminum main chassis is used as the standard chassis in SD1.0, and its 2.0mm thickness provides high rigidity and stability. It also provides more traction to the front, resulting in better control on corner exits and preventing understeer, which can cause significant demerit...
CHF 119.90
En stock
+ −
Front susp. arm(TypeB/2hole/F3.5pin) for YZ-4SF2
YOK-S4-008F2A
entspricht: S4-008F2
CHF 12.50
En stock
+ −
Rear X Shock Ver II Set
YOK-B2-S1L
 
CHF 59.90
En stock
+ −
Front X Shock Ver II Set
YOK-B2-S1S
 
CHF 59.90
En stock
+ −
3×6×2.0mm Alu Shim (8pcs·Black)
YOK-ZC-A3620BA
entspricht: ZC-A3620B
CHF 5.90
En stock
+ −
V4 Steering Gyro Blue Version
YOK-DPP-302V4BL
This is the blue version of the V3 Gyro, which is used by a high percentage of top drivers. Four modes are provided for different levels of operation, allowing you to select the level of interference with which the gyro will operate. Endponts can also be set for easy adjustment to your...
CHF 59.90
En stock
+ −
Steel front lower suspension mount for YZ-2CAL 3.1
YOK-Z2-300FLSA
entspricht: Z2-300FLS
CHF 29.50
En stock
+ −
Alu Rear Weight H Arm Blau für RD2.0/SD2.0
YOK-Y2-BL8RAW
CHF 59.90
En stock
+ −
Alu Rear Weight H Arm Purple für RD2.0/SD2.0
YOK-Y2-P08RAW
CHF 59.90
En stock
+ −
YZ-4SF Light Wheigt Body (J-Concept)
YOK-S4-101LWA
entspricht: S4-101LW
CHF 37.90
En stock
+ −
Alu Rear Weight H Arm Rot für RD2.0/SD2.0
YOK-Y2-R08RAW
CHF 59.90
En stock
+ −
Body Set (with Masking) Super Dog Fighter Works 91
YOK-YZ-101W1
CHF 59.90
En stock
+ −
Graphite Front Shock Tower YZ4-SF
YOK-S4-017A
entspricht: S4-017
CHF 18.90
En stock
+ −
Aluminum Rear Hub Carrier Red für RD2.0/SD3.0
YOK-RD-415ARR
Aluminum rear hub carrier for RD/SD series. It is more rigid than the standard plastic one, and improves rear traction and slide control. Upper arm fixing positions allow for more precise adjustment of camber change due to suspension stroke. The lower suspension arm pins can also be selected from...
CHF 59.90
En stock
+ −
Main chassis for MR/RS
YOK-B2-002MR
 
CHF 39.90
En stock
+ −
BD8/BD7'16 Gear Diff Unit
YOK-B8-500GS
 
CHF 52.90
En stock
+ −
Universal shaft for YZ-2T
YOK-Z2-01075TA
entspricht: Z2-01075T
CHF 39.90
En stock
+ −
Alu High mount upper mount spacer
YOK-Y2-202USL
CHF 39.90
En stock
+ −
Alu steering hub carrier für YZ-4SF2
YOK-S4-41306A
An aluminum front steering hub carrier that further enhances the cornering performance of YZ-4SF2 on high grip road surfaces such as carpets or artificial grass. Comparing with standard caster angle (8 degrees), the caster angle of 6 degrees is specialized for high grip road surfaces....
CHF 52.90
En stock
+ −
Aluminium / Graphite Servo Halterung für RS2.0
YOK-RS-203AS
This servo mount is a hybrid structure that enhances the steering response of the RS2.0. The stay connecting it to the chassis is made of aluminum, and a lightweight graphite plate is used on the upper side of the chassis to prevent excessive changes in the center of gravity. The servo itself is...
CHF 39.90
En stock
+ −
Offset Rear Universal Joint Set RD/SD/MD RD-415AR
YOK-RD-010ROS
This set lengthens the axle section of the universal shaft to further enhance the effect of increased traction created when driving. The axle's inner bearing is 1050, which is attached to the aluminum rear hub carrier with an adapter. (RD-415AR only)
CHF 39.90
En stock
+ −
Metal gear diff kit (High capacity) for YZ-2 serie
YOK-Z2-500MG3A
High capacity
CHF 43.90
En stock
+ −
Graphite battery holder for MR/RS Midship
YOK-B2-118MA
 
CHF 29.90
En stock
+ −
Alu Front Susp.Mount for BD7 (Rear side 43.5mm)
YOK-B7-3135FR
the new block has increased steering response as well as
CHF 23.90
En stock
+ −
Plastic molded X shock cap
YOK-BM-S812RA
entspricht: BM-S812R
CHF 6.50
En stock
+ −
Flex Gear Differential Oil(35cc) DOT1
YOK-CS-DOT1
Oel-Vergleichstabelle #650 = DOT1 #800 = DOT2 #1000 = DOT3 #1200 = DOT4 #1600 = DOT5 #2100 = DOT6 #3000 = DOT7
CHF 11.90
En stock
+ −
Graphite molded S3/LD rear sus-arm YZ2-DTM/CAL
YOK-Z2-008R3GA
For YZ-2 DTM/CAL 3/3.1
CHF 16.90
En stock
+ −
Aluminum Special Servo Mount
YOK-B7-203B
 
CHF 39.90
En stock
+ −
Karosserie 1:10 FWD Type-A
YOK-SP-FWDABA
A polycarbonate FWD touring car body Type-A that matches the 1/10 size FWD touring car category held around the world. The wide overfender creates strength, and the short overhang and front nose spoiler provide high exercise performance. In addition, it is equipped with a large rear wing to...
AuswahlhilfeFWD 1:10 MaterialLexan Massstab1:10 EinsatzOn-Road Lackierungunlackiert
CHF 57.90
En stock
+ −
Alu Main Shaft (Anodized) YZ-4
YOK-Z4-644H
 
CHF 8.90
En stock
+ −
J Concept F2 Truck body for YZ-2T
YOK-Z2-101TA
entspricht: Z2-101T
AuswahlhilfeTruck Massstab1:10 EinsatzOff-Road Lackierungunlackiert HerstellerYokomo
CHF 57.50
En stock
+ −
High Grade O-Ring (oil resistant blue, 8stk.)
YOK-YS-7HG2
CHF 8.90
En stock
+ −
Front Wheel (White)
YOK-B4-821WA
entspricht: B4-821W
AuswahlhilfeBuggy MaterialKunststoff Reifen/Rad-TypFelgen Massstab1:10 EinsatzOff-Road
CHF 6.40
En stock
+ −
Racing performer Rotor M4 D12.2 x d7.25 titan
YOK-RP-095A
entspricht: RP-095
CHF 57.50
En stock
+ −
Clear lexan front wing (Wide/Narrow) for YZ-2
YOK-Z2-107FWA
entspricht: Z2-107FW
CHF 8.90
En stock
+ −
Racing Performer Rotor M4 D12.5 x 7.25 titan
YOK-RP-096A
entspricht: RP-096
CHF 57.50
En stock
+ −
Alu Transmission Case edge trimmed YD-4
YOK-Y4-302C
 
CHF 114.90
En stock
+ −
Aluminum rear brace support YD2
YOK-Y2-303ARA
entspricht: Y2-303AR
CHF 26.90
En stock
+ −
Alu Center Mount (Chamfer) YZ-4
YOK-Z4-304LC
 
CHF 22.90
En stock
+ −
Aluminum Light Weight SP Steering Block RD/SD
YOK-Y2-415SAA
The 0 offset steering block adopted from SD2.0, which has been well-received for its neutral steering characteristics, is now made of aluminum to enhance steering response.
CHF 37.90
En stock
+ −
Alu lightweight SP Steering Block RD/SD Red
YOK-Y2-415SAR
This is a color version of the Offset 0 steering block for the RD/SD series, which has been well-received for its neutral characteristics, and now comes in three new colors: blue, purple, and red to match the machine color. Compared to the standard plastic blocks, the aluminum version is much...
CHF 37.90
En stock
+ −
Hex Socket Rod End Ball (M size / 12.8mm length)
YOK-ZC-206MHA
entspricht: ZC-206MH
CHF 6.90
En stock
+ −
Front & Rear Shock Tower/Spacer YZ-4
YOK-Z4-017
 
CHF 18.90
En stock
+ −
Alu Chassis US Spec für BD12
YOK-B12-002AU
Aluminum main chassis for the BD12 competition touring car. It is a highly rigid US specification with little wall removal, making it ideal for high-grip carpeted surfaces. The center of gravity is lowered, which is also effective as a high-side countermeasure.
CHF 112.90
En stock
+ −
Graphite molded L5/LD rear sus-Arm YZ-4SF2/YZ-2
YOK-S4-008R5GA
For YZ-4SF2/YZ-2CAL DTM3 and 3.1
CHF 15.90
En stock
+ −
Alu Steering Bell Crank für 2WD Drift
YOK-D-163
 
CHF 55.90
En stock
+ −
Motor Mount für PCS
YOK-B8-302M2
 
CHF 55.90
En stock
+ −
Aluminum front shock tower for YD-2 EX
YOK-Y2-017AFEA
 
CHF 49.90
En stock
+ −
YD-2/BD8 Brass Sus holder C (46.4~49.6mm)
YOK-TS-2151
Please be announced the new items made by brass for BD-8 and YD-2 series. This new suspension holder has released under Team Suzuki brand. It is the same shape but made by brass for gaining more weight to be functioned as vehicle weight balance items. By replacing with the standard...
CHF 27.90
En stock
+ −
Center Balance Weight
YOK-B9-BW50A
50g
CHF 27.90
En stock
+ −
LC Transmission Case for YZ-2 Series
YOK-Z2-302TLCA
Yokomo is excited to release our New LC (Laydown/Carpet) Transmission Case for Carpet, Astro, and hi-traction Dirt surfaces made specially for our YZ-2 series of vehicles. The New LC Transmission Case is a 3-piece construction that allows for quick/easy diff access. This also uses the...
CHF 12.90
En stock
+ −
Gear Differential Bevel Gear Set
YOK-BD-503G
 
CHF 15.90
En stock
+ −
Aluminum Height Gauge for Off-Road (3-42mm)
YOK-YT-HGOC
This aluminium height gauge is ideal for off-road vehicles. The long reach of the measuring section makes it easy to measure the inside of the chassis, which is difficult to measure with ordinary gauges. The wide measuring range of 3mm to 42mm makes it suitable for racing strollers and off-road...
CHF 36.90
En stock
+ −
Chassis Platte BD12 Carbon
YOK-B12-002
CHF 109.90
En stock
+ −
Front/Rear Body Mount YD-4
YOK-Y4-016A
entspricht: Y4-016
CHF 7.50
En stock
+ −
Rear Double Joint Universal Shaft
YOK-BD-010RW
 
CHF 54.90
En stock
+ −
Rear toe control system for BD8-2018
YOK-B8-RTC18
CHF 54.90
En stock
+ −
MIP Puck Drive cup protector rebuild kit for YZ-2
YOK-Z2-17045
CHF 54.90
En stock
+ −
Aluminum lightweight front steering block for YD-2
YOK-Y2-415SALA
It is a lightweight steering block that is about 20% lighter than the conventional one by shaping up the aluminum steering block that has been released so far. The upper and lower kingpin positions connected to the A arm are offset, and the kingpin axis can be tilted inward once without a...
CHF 79.90
En stock
+ −
Aluminum Front Bulkhead Bridge SD3.0
YOK-SD-302S3
CHF 54.90
En stock
+ −
Alu Front Suspension Mount for BD7 (FR 42.7mm)
YOK-B7-3127FR
the new block has increased steering response as well as
CHF 21.90
En stock
+ −
L5/LD Rear suspension arm(TypeB/F3.5pin) YZ-4SF2
YOK-S4-008R5BA
entspricht: S4-008R5B
CHF 11.90
Alu Front Suspension Mount (Rear/44.2mm)
YOK-B7-3142FR
This one piece designed aluminum suspension mount in 44.2mm for rear side at front suspension.
CHF 21.90
En stock
+ −
Racing Performer M4 BL Motor 17.5T für Touring
YOK-RPM-MS175A
Rotor F12.0×7.25×24.2
CHF 109.00
En stock
+ −
Graphite main chassis BD11
YOK-B11-002A
entspricht: B11-002
CHF 109.00
En stock
+ −
RP Driftfelge High Tract.(6mm Offset) titan 1paar
YOK-RP-6313T6A
In reflect with the demand for more road trace feels at low traction track surface, Yokomo will release new high traction wheels under Racing Performer brand. The new high traction wheels are all 6mm offsets and with 3 selectable colors, Titanium, Yellow and White. Besides, the edge of...
Auswahlhilfe190mm Touring MaterialDrift Reifen/Rad-TypFelgen Massstab1:10 EinsatzOn-Road Drift
CHF 9.50
En stock
+ −
Matte Graphite Main Chassis YZ-870C
YOK-YZ-002G
Graphite parts that further enhance the performance of the YZ-870c Super Dogfighter are now available. The lightweight and highly rigid graphite material has a matte black surface finish that does not detract from the machine's image. In addition to parts that upgrade existing FRP parts such as...
CHF 109.00
En stock
+ −
Graphite Main Chassis (2.4mm) for SD2.0
YOK-Y2-002S2
CHF 109.00
En stock
+ −
Titanium coat shock shaft YD-4
YOK-Y4-S5TA
entspricht: Y4-S5T
CHF 21.50
En stock
+ −
Verfügbarkeit
Verfügbar beim Lieferanten
Abmessungen
Auswahlhilfe
Material
Prix
CHF
–
CHF
  • CHF 1.5
  • CHF 849
Reifen/Rad-Typ
Servo-Typ
Verwendung
Massstab
Motor / Antrieb
Einsatz
Anspruch
Lackierung
Fertigungsgrad
Max. Geschwindigkeit
Marke
Betriebsspannung