Français (CH)
ERSATZTEIL-FINDER

Yokomo

Recommandés
96 Par page
Alum.Shock set for RO1.0
YOK-Z2-S1SS
CHF 109.00
En stock  
+ −
Front W/J Universal Assy. (Bearing type/1pcs.)
YOK-MS-010FW
CHF 35.90
En stock  
+ −
Aluminum Separate Suspension Mount (43.9mm)
YOK-B7-3139BS
 
CHF 17.90
En stock  
+ −
Alu adjustable suspension mount set for YD-2 red
YOK-Y2-301ARA
entspricht: Y2-301AR
CHF 92.50
En stock  
+ −
Motor mount 2016
YOK-B7-32L16
 
CHF 52.90
En stock  
+ −
Front "A" Arm Conv. for YD-4/YD-4MR
YOK-Y4-AAC
 
CHF 52.90
En stock  
+ −
MIP Puck Aluminum outdrive cups for YZ-2 Stock ver
YOK-Z2-17132
CHF 52.90
En stock  
+ −
Rear shock shaft for YZ-2 V3 Titanium coat
YOK-Z2-S2LTA
entspricht: Z2-S2LT
CHF 14.90
En stock  
+ −
Pandem Nissan Fairlady Z RZ34 LED Light Set
YOK-SD-RZ34L
CHF 52.90
En stock  
+ −
Aluminium Rear Shock Tower (Blue) RD/SD Series
YOK-Y2-018AR2BL
Newly released are the Hybrid Front Shock Tower (Blue), an optional part for the RD/SD series, and the standard aluminum shock tower for the SD3.0 Blue version. Both are designed for the same series and can be bolted on to the RD2.0 chassis and other chassis.
CHF 52.90
En stock  
+ −
Alu Steering Bell Crank L/R YZ4-SF
YOK-S4-200AA
entspricht: S4-200A
CHF 45.90
En stock  
+ −
Front Belt Tensioner Set black
YOK-B7-FBTS16
 
CHF 21.00
En stock  
+ −
Black Alum. Separate Sus. Mount (42.7mm)
YOK-B7-3127BS
 
CHF 21.00
En stock  
+ −
Rear Wheel Hub
YOK-B4-011RA
entspricht: B4-011R
CHF 9.90
En stock  
+ −
YZ-2CAL3.1 Hard main chassis (High grip surface/Lo
YOK-Z2-002C31A
entspricht: Z2-002C31
CHF 105.00
En stock  
+ −
YZ-2DTM3.1 Hard main chassis (Dirt surface/Long ve
YOK-Z2-002D31A
entspricht: Z2-002D31
CHF 105.00
En stock  
+ −
Aluminum top shaft for YZ-2DTM3/CAL3
YOK-Z2-303TA3A
For Z2-670S
CHF 17.90
En stock  
+ −
B-MAX4II Main Chassis (Li-po Battery Correspond)
YOK-BM-002L
 
CHF 34.90
En stock  
+ −
Aluminium Rear Susp. Mount (Rear/S4ARm) YZ-4
YOK-Z4-300SRR
 
CHF 34.90
En stock  
+ −
Steering bell crank (with bearing) for BD8-2018
YOK-B8-202SS
CHF 63.90
En stock  
+ −
Graphite front shock towers BD11
YOK-B11-017A
entspricht: B11-017
CHF 25.90
En stock  
+ −
Upper Suspension Arm Mount (Left & Right)
YOK-B4-300UM
 
CHF 33.50
En stock  
+ −
Ventilated Slipper Plate YZ-2/B-Max2
YOK-Z2-670VPA
entspricht: Z2-670VP
CHF 14.90
En stock  
+ −
Alu adjustable rear short H arm for YD-2 (purple)
YOK-Y2-P08RASA
entspricht: Y2-P08RAS
CHF 99.90
En stock  
+ −
Graphite Main Chassis SD3.0
YOK-SD-002S3
CHF 99.90
En stock  
+ −
Gokuraku Offroad Wing (Narrow size)
YOK-ZS-GWBNA
entspricht: ZS-GWBN
CHF 9.90
En stock  
+ −
Kohlefaser Chassis 2.2mm MS2.0
YOK-MS-002-2
CHF 99.90
En stock  
+ −
Gear Differential Unit
YOK-B7-500GS
CHF 49.90
En stock  
+ −
Front shock shaft for YZ-2 V3 Titanium coat
YOK-Z2-S2STA
entspricht: Z2-S2ST
CHF 13.90
En stock  
+ −
Full counter solid axle set (Rear×1.8/Blue)
YOK-IB-FCD18
 
CHF 49.90
En stock  
+ −
Karosserie GT300 HasePro Prius GT
YOK-GT-AHPBS
MaterialLexan Auswahlhilfe1:12 Massstab1:12 EinsatzOn-Road Lackierungunlackiert
CHF 49.90
En stock  
+ −
5mm spacer shimm (0.05mm·0.1mm·0.2mm)
YOK-ZC-S50SA
entspricht: ZC-S50S
CHF 6.90
En stock  
+ −
Gear Diff Unit (with Input Shaft) YD-4
YOK-Y4-503
 
CHF 49.90
En stock  
+ −
BD8/BD7 Titanium Turnbuckle Set (9pcs)
YOK-B8-TBS
CHF 49.90
En stock  
+ −
Body Mount Set BD9/BD10
YOK-B9-016A
entspricht: B9-016
CHF 11.90
En stock  
+ −
Yokomo Factory team Hoody (S size)
YOK-ZC-P26S
CHF 49.90
En stock  
+ −
Karosserie GReedy R35 Spec D ohne Decals 1:10
YOK-SD-GR35BA
entspricht: SD-GR35B
MaterialLexan Auswahlhilfe190mm Touring Massstab1:10 EinsatzOn-Road Drift Lackierungunlackiert
CHF 54.90
Rupture de stock
Titanium turn buckle set for YZ-4SF2
YOK-S4-TBS2A
entspricht: S4-TBS2
CHF 49.90
En stock  
+ −
Aluminum Front Upper I Arm (Purple) for YD-2
YOK-Y2-P08FUIA
An aluminum I arm used for the front upper arm of the YD-2 series. Red anodized color that matches the red version of the YD-2 series. By moving the spacer, the caster angle can be adjusted in the range of 7mm back and forth. Although it is made of highly rigid aluminum, it has been made as...
CHF 49.90
En stock  
+ −
Front & Undertray diffuser set for YD-2 /4 series
YOK-Y2-001BDA
Greatly improve the front grip and turning performance of the chassis when entering a corner or snapping transitions. The response of the car to the steering operation becomes more of a direct feeling, and the control of the drift can be carried out as expected.
CHF 19.90
En stock  
+ −
Front Lower Short T Arm für RD / SD Reihe
YOK-Y2-008FTBL
CHF 49.90
En stock  
+ −
Front Lower Short T Arm für RD / SD Reihe
YOK-Y2-008FTR
CHF 49.90
En stock  
+ −
Yokomo Racing Performer Ultra Shock Oil 30wt
YOK-RP-085300A
Yokomo Racing Performer Ultra Shock Oil 30wt
CHF 10.80
En stock  
+ −
Aluminum Rear Hub Carrier for MO1.0/2.0
YOK-MO-415RA
Aluminum rear hub carrier for MO series. Previously sold as a set with upper arm mounts, the hub carrier part is now sold separately. The rigidity of the axle area is greatly increased, which improves stability during cornering, jump landings, and other situations where a large load is placed on...
CHF 49.90
En stock  
+ −
Bulk Head B (Front Right/Rear Left·Black)
YOK-B7-302C15
 
CHF 24.90
En stock  
+ −
Rear motor conversion kit for YD-2 series
YOK-Y2-RMCA
Introducing the ultimate option for increasing rear traction and speed! That is already known, Rear motor conversion kit which enable to mount on both YD-2E series and YD-2S series. (S series require to add some other parts) 1)Improving the rotational effect of the motor by reducing the...
CHF 47.90
En stock  
+ −
Alminum Suspension mount (43.9mm·Black)
YOK-B7-3139B
 
CHF 19.90
En stock  
+ −
Alminum Suspension mount (46.4mm·Black)
YOK-B7-3164B
 
CHF 19.90
En stock  
+ −
Graphite front shock tower for YZ-2DTM3/CAL3
YOK-Z2-017-3A
3mm Lowered
CHF 15.90
En stock  
+ −
Body Set with Masking for YZ-870C
YOK-YZ-101
CHF 49.60
En stock  
+ −
Steering hub carrier / bushing YZ-2 DTM3.1/CAL3.1
YOK-Z2-413H3A
entspricht: Z2-413H3
CHF 11.90
En stock  
+ −
Team Yokomo 2016 Jacket Grösse M
YOK-ZC-A23M
CHF 99.00
En stock  
+ −
Team Yokomo 2016 Jacket Grösse L
YOK-ZC-A23L
CHF 99.00
En stock  
+ −
Spool Drive Cup BD9/BD10
YOK-B9-501MCAA
(Aluminum made)
CHF 24.90
En stock  
+ −
YD-2S Plus Conversion Kit
YOK-Y2-YD2SC
This new conversion is intended for the customer who would consider to upgrade for High Mount Motor spec like YD-2S Plus.
CHF 99.00
En stock  
+ −
Alu Vari Kingpin Angle Steering block Set SDR01LTS
YOK-Y2-415SALL
CHF 99.00
En stock  
+ −
HD f5.5mm Rod end ball (Screw 6mm long/4pcs) for Y
YOK-Z2-206-6A
entspricht: Z2-206-6
CHF 6.90
En stock  
+ −
Graphite Main Chassis MS1.0
YOK-MS-002
CHF 99.00
En stock  
+ −
3gear Box Set für CA (Carpet Astroturf)
YOK-Z2-302C3
 
CHF 32.90
En stock  
+ −
Front suspension arm for YZ-2T
YOK-Z2-008FTA
entspricht: Z2-008FT
CHF 14.00
En stock  
+ −
Rear Anti Roll Bar "hard" set YZ-2 new arm compat.
YOK-Z2-412RH2
CHF 32.90
En stock  
+ −
Aluminum frame 30mm cooling fan (Red)
YOK-D-CFRA
A cooling fan that uses a luxurious aluminum frame. With a 30mm size that is ideal for cooling the motor, having a lineup of three colors, silver, red, and purple, which would match with variations of the YD-2 series. The connector is a pin shaped that will be easy to connect with the power...
CHF 32.90
En stock  
+ −
Aluminum Rear Hub Carrier (3mm Pin) CAL3/DTM3
YOK-Z2-415RS2A
entspricht: Z2-415RS2
CHF 97.90
En stock  
+ −
Front“X30”shock set
YOK-S4-S1SA
entspricht: S4-S1S
CHF 69.90
En stock  
+ −
Universal shaft 66.5mm bone
YOK-Z2-010-65
 
CHF 32.50
En stock  
+ −
30mm Fan Shroud SO3.0
YOK-SO-FSS30
This fan shroud is attached to the cooling fan of a 2WD off-road vehicle to increase the cooling effect of the motor. It will greatly contribute to maintaining motor performance and efficiency in the coming season of higher temperatures. A 30mm cooling fan is attached to the chassis via the...
CHF 13.90
En stock  
+ −
Rear hard stabilizer set for YZ-2/4
YOK-Z2-412RH
 
CHF 29.90
En stock  
+ −
Front One-Way Assy (for Right Side Belt/Red)
YOK-BR-640W
 
CHF 47.90
En stock  
+ −
Full counter solid axle set (Rear×2.0/Blue)
YOK-IB-FCD20
 
CHF 47.90
En stock  
+ −
Ceramic Kugellager 5x10x4mm 2stk.
YOK-BB-1050CBA
entspricht: BB-1050CB
CHF 13.90
En stock  
+ −
B-MAX4III Alu Steering Hub Carrier (15 degrees)
YOK-B4-413A15
 
CHF 47.90
En stock  
+ −
MIP Pucks Aluminum diff ring hub for YZ-2 Stock ve
YOK-Z2-18842
CHF 47.90
En stock  
+ −
Front Stabi Set YZ2 6stk.(New arm compatible/6 bar
YOK-Z2-412F3A
entspricht: Z2-412F3
CHF 25.90
En stock  
+ −
Lexus RC GT3 Clear Body for Touring Car
YOK-SP-LFGT3B
This real scale body fits just right for 190mm wide touring cars, and is a scale-down version of the LEXUS RCF GT3, complete with wing and decals,all officially approved by Toyota. The massive form and large rear wing provide a highly stable driving feel. It is also compatible with the...
MaterialLexan Auswahlhilfe190mm Touring Massstab1:10 EinsatzOn-Road, On-Road Drift Lackierungunlackiert
CHF 47.90
En stock  
+ −
Hybrid Shock Tower for RD/SD Series
YOK-Y2-017AGBL
Newly released are the Hybrid Front Shock Tower (Blue), an optional part for the RD/SD series, and the standard aluminum shock tower for the SD3.0 Blue version. Both are designed for the same series and can be bolted on to the RD2.0 chassis and other chassis.
CHF 47.90
En stock  
+ −
HD f5.5mm Rod end ball (Screw 8mm long/4pcs) for Y
YOK-Z2-206-8A
entspricht: Z2-206-8
CHF 6.90
En stock  
+ −
BD-10 Separate Rear Suspension Mount (Front (Brass)
YOK-B10-301SBA
entspricht: B10-301SB
CHF 31.90
En stock  
+ −
SO1.0/2.0 High Traction Offset Rear Graphite
YOK-Z2-008R3GH
SO series rear lower suspension arm. By shortening the wheelbase by up to 7mm on the suspension arm side, The rear load is increased by adding the angle of attack of the bone, and the rear grip is improved. Pitching control is also made easier, which improves...
CHF 23.90
En stock  
+ −
Graphite front shock tower(Gull type)
YOK-Z2-017GA
 
CHF 16.50
En stock  
+ −
Alum. 13 Shock Cap Ball Hard for SO/MO2.0
YOK-YS-8BH13
Shock cap ball for F13mm big bore shock. The surface is hard coated to make it resistant to abrasion. Contains 4 pieces.
CHF 11.90
En stock  
+ −
Shock End Plastic Parts (S/M/L size) YZ-2DTM/YZ-4
YOK-Z2-S6MA
 
CHF 7.90
En stock  
+ −
Grade up conversion 1 for YD-2
YOK-Y2-GC2A
entspricht: Y2-GC2
CHF 95.00
En stock  
+ −
Aluminum main chassis for YRX-12
YOK-YX-02A
High quality, top range aluminum material has been selected for more rigid with 2.0mm thick main chassis and rear brace.
CHF 94.50
En stock  
+ −
Slipper Pad
YOK-B2-670CA
entspricht: B2-670C
CHF 8.90
En stock  
+ −
Short Shock Set for MS1.0
YOK-MS-SSS
These short Aluminum Shocks are used in the MS1.0 standard. The Shock length is set to match the latest touring cars to lower the center of gravity as much as possible. The lower spring bearing is fitted with a bearing to release torsion of the coil spring during stroke and bring out neutral...
CHF 94.10
En stock  
+ −
Hard Main Chassis(CG) for BD8-2018
YOK-B8-00218H
2.5mm Carbon Graphite Hard Main Chassis has launched for the race at high grip surface condition.
CHF 92.90
En stock  
+ −
Titanium coat shock shaft YD-4
YOK-Y4-S5TA
entspricht: Y4-S5T
CHF 21.50
En stock  
+ −
Battery Plate (CG) YZ-4
YOK-Z4-118P
 
CHF 18.50
En stock  
+ −
Alu Adjust. Susp. Mount Set YD2 (Purple/Bevel edge
YOK-Y2-301APA
entspricht: Y2-301AP
CHF 92.50
En stock  
+ −
Alu Hight mount front shock Tower
YOK-Y2-017AFL
CHF 45.90
En stock  
+ −
Aluminum Rear Hub Carrier L/R for SO Series
YOK-SO-415RA
CHF 45.90
En stock  
+ −
B-MAX2MR/RS Light weight body
YOK-B2-101MRL
 
AuswahlhilfeBuggy Massstab1:10 EinsatzOff-Road HerstellerYokomo MarkeDiverse Marken
CHF 26.90
En stock  
+ −
Aluminium Front Shock Tower (Blue) RD/SD Series
YOK-Y2-017AFEBL
Newly released are the Hybrid Front Shock Tower (Blue), an optional part for the RD/SD series, and the standard aluminum shock tower for the SD3.0 Blue version. Both are designed for the same series and can be bolted on to the RD2.0 chassis and other chassis.
CHF 45.90
En stock  
+ −
Upper Deck for B7-FMC
YOK-B7-00315
 
CHF 22.90
En stock  
+ −
Suspension Mount Bushings YZ4-SF
YOK-S4-300BSA
entspricht: S4-300BS
CHF 13.90
En stock  
+ −
Suspension Mount messing 44.2mm 12.4gr.
YOK-B7-3142FRB
Brass -1mm lower front suspension mount (Rear side 44.2mm·12.4g)
CHF 22.90
En stock  
+ −
Verfügbarkeit
Verfügbar beim Lieferanten
Abmessungen
Auswahlhilfe
Material
Prix
CHF
–
CHF
  • CHF 1.5
  • CHF 849
Reifen/Rad-Typ
Servo-Typ
Verwendung
Massstab
Motor / Antrieb
Einsatz
Anspruch
Lackierung
Fertigungsgrad
Max. Geschwindigkeit
Marke
Betriebsspannung