Deutsch (CH)
ERSATZTEIL-FINDER

Yokomo

Ordnen nach:
Empfohlen
Zeigen:
96
Aluminum main chassis for YRX-12
YOK-YX-02A
High quality, top range aluminum material has been selected for more rigid with 2.0mm thick main chassis and rear brace.
CHF 94.50
Auf Lager  
+ −
Aluminum Wing Stay (Black)
YOK-D-057MA
entspricht: D-057M
CHF 12.90
Auf Lager  
+ −
Short Shock Set for MS1.0
YOK-MS-SSS
These short Aluminum Shocks are used in the MS1.0 standard. The Shock length is set to match the latest touring cars to lower the center of gravity as much as possible. The lower spring bearing is fitted with a bearing to release torsion of the coil spring during stroke and bring out neutral...
CHF 94.10
Auf Lager  
+ −
Hard Main Chassis(CG) for BD8-2018
YOK-B8-00218H
2.5mm Carbon Graphite Hard Main Chassis has launched for the race at high grip surface condition.
CHF 92.90
Auf Lager  
+ −
Battery Plate (CG) YZ-4
YOK-Z4-118P
 
CHF 18.50
Auf Lager  
+ −
Titanium coat shock shaft YD-4
YOK-Y4-S5TA
entspricht: Y4-S5T
CHF 21.50
Auf Lager  
+ −
Alu Adjust. Susp. Mount Set YD2 (Purple/Bevel edge
YOK-Y2-301APA
entspricht: Y2-301AP
CHF 92.50
Auf Lager  
+ −
Rear ESC mount for YD-2 series (Purple)
YOK-Y2-REM-PA
A ESC mount set that can change the weight balance of the chassis by mounting the ESC on the rear overhang and greatly enhance the rear traction. Especially effective on roads with low grip, the load applied to the rear tires at the corner exit is overwhelming! It is possible to get a...
CHF 42.90
Auf Lager  
+ −
Alu Hight mount front shock Tower
YOK-Y2-017AFL
CHF 45.90
Auf Lager  
+ −
Karosserie GReedy R35 Spec D ohne Decals 1:10
YOK-SD-GR35BA
entspricht: SD-GR35B
Auswahlhilfe190mm Touring MaterialLexan Massstab1:10 EinsatzOn-Road Drift Lackierungunlackiert
CHF 54.90
Auf Lager  
+ −
Aluminum Rear Hub Carrier L/R for SO Series
YOK-SO-415RA
CHF 45.90
Auf Lager  
+ −
Aluminium Front Shock Tower (Blue) RD/SD Series
YOK-Y2-017AFEBL
Newly released are the Hybrid Front Shock Tower (Blue), an optional part for the RD/SD series, and the standard aluminum shock tower for the SD3.0 Blue version. Both are designed for the same series and can be bolted on to the RD2.0 chassis and other chassis.
CHF 45.90
Auf Lager  
+ −
Graphite Battery Holder Set for YD-2 Series
YOK-Y2-118CG2A
The graphite battery holder for the YD-2 series has a new design. The graphite plate has been delicately cut to reduce weight, making it a perfect match for high traction chassis. The graphite plate has been delicately cut to reduce weight, making it ideal for use with high...
CHF 75.90
Nicht auf Lager
Upper Deck for B7-FMC
YOK-B7-00315
 
CHF 22.90
Auf Lager  
+ −
Suspension Mount messing 44.2mm 12.4gr.
YOK-B7-3142FRB
Brass -1mm lower front suspension mount (Rear side 44.2mm·12.4g)
CHF 22.90
Auf Lager  
+ −
DP48/84T SpurGear of Dual Pad forB-YZ4S
YOK-S4-SG84DA
entspricht: S4-SG84D
CHF 6.50
Auf Lager  
+ −
Graphite Rear Shock Tower SO3.0
YOK-SO-018
CHF 22.90
Auf Lager  
+ −
Clump Wheel Hub (5.0mm·Black)
YOK-BD-011CBA
entspricht: BD-011CB
CHF 12.90
Auf Lager  
+ −
Front Steering Hub Carrier 8degrees YZ4-SF
YOK-S4-413-8A
entspricht: S4-413-8
CHF 9.90
Auf Lager  
+ −
Stabi Set (werden 2x für 1 Fahrzeug benötigt) YZ-4
YOK-Z4-412
CHF 22.50
Auf Lager  
+ −
Front Susp. Mount messing (rear side 43.5mm 12.2gr)
YOK-B7-3135FRB
 
CHF 22.50
Auf Lager  
+ −
10×6mm Bearing
YOK-BB-106-4A
entspricht: BB-106-4
CHF 13.90
Auf Lager  
+ −
Sparen Sie 50%
Sparen Sie 50%
BL-EP6 Brushless speed controller (programmer incl
YOK-BL-EP6A
It is a brushless speed controller that comes with a programmer and realizes a reasonable price while supporting each category of on, off, and drift. In addition to Yokomo's sensor-type brushless motors, it is also possible to drive general-purpose sensorless motors. Of course, it is recommended...
CHF 45.00 CHF 89.90 -50%
Auf Lager  
+ −
Main chassis (Hard alumite) for YZ-4SF2
YOK-S4-002S2A
entspricht: S4-002S2
CHF 89.90
Auf Lager  
+ −
Light weight slide rack für YD-2Z
YOK-Y2-202SZA
A slide rack set that fits the YD-2Z chassis. Teams products with rails that have been reshaped and milled, and are effective in improving steering response and kinetic performance by reducing weight.
CHF 89.90
Auf Lager  
+ −
Aluminum frame 30mm Cooling fan (Silver)
YOK-D-CFSA
A cooling fan that uses a luxurious aluminum frame. With a 30mm size that is ideal for cooling the motor, having a lineup of three colors, silver, red, and purple, which would match with variations of the YD-2 series. The connector is a pin shaped that will be easy to connect with the power...
CHF 33.90
Auf Lager  
+ −
Slide Rack Set for RD1.0/2.0
YOK-RD-202SR
Slide rack set for use with RD1.0 and 2.0 to further increase the cutting angle.Use the mount on the servo rear side that comes standard with the kit.
CHF 89.90
Auf Lager  
+ −
Steering block L/R
YOK-Z2-415SH3A
Hard type
CHF 7.90
Auf Lager  
+ −
Full counter solid axle set (Rear×1.8/Red)
YOK-IB-FCD18R
 
CHF 44.90
Auf Lager  
+ −
Rotor Magnet D12.3xd5.00 M3 Motor
YOK-RP-058
 
CHF 44.90
Auf Lager  
+ −
Hard coat pivot ball for BD7 shock cap/end (4pcs)
YOK-B7-S8HA
entspricht: B7-S8H
CHF 12.95
Auf Lager  
+ −
Graphite Bumper für YD-2
YOK-Y2-001GBA
entspricht: Y2-001GB
CHF 44.90
Auf Lager  
+ −
DRIFT Oil
YOK-D-013A
Bearing oil made by Liqui Moly. Less friction and reduced wear.
CHF 13.90
Auf Lager  
+ −
Messing Front Gewicht L/R 35gr. für BDFWD/BD10F
YOK-B10-BWF35
This front weight effectively increases the front traction of FWD cars. Made of black coated brass, weighing approx. 35g per side or approx. 70g on both sides, they can be screwed on for both BDFWD and BD10F, so there is no need to worry about them falling off while driving or in a...
CHF 44.90
Auf Lager  
+ −
Shock Body
YOK-B9-S4S
CHF 29.90
Auf Lager  
+ −
RP Driftfelge High Tract.(6mm Offset) weiss 1paar
YOK-RP-6313W6A
In reflect with the demand for more road trace feels at low traction track surface, Yokomo will release new high traction wheels under Racing Performer brand. T
Auswahlhilfe190mm Touring MaterialDrift Reifen/Rad-TypFelgen Massstab1:10 EinsatzOn-Road Drift
CHF 9.50
Auf Lager  
+ −
BD-10 Cross Plate (Cross Plate Post
YOK-B10-118CPA
entspricht: B10-118CP
CHF 29.90
Auf Lager  
+ −
3-pad Slipper Set für YZ-2
YOK-Z2-670C3
This is a set of additional parts to convert the YZ-2 series slipper system to a 3-pad system. The effect is smoother than that of the standard 2-pad system, and allows for more delicate adjustment. This improves driving stability, especially on high-grip surfaces, and reduces the...
CHF 29.90
Auf Lager  
+ −
Ventilated Dual Slipper Set YZ-2/B-Max2
YOK-Z2-670V
CHF 39.90
Auf Lager  
+ −
Aluminum Heat Sink Motor Plate RS2.0
YOK-RS-302HM
This is an optional part for RS2.0, aluminum motor plate. It is shaped like a heat sink and improves the cooling effect of the motor. It suppresses heat leakage of the motor during driving and improves power efficiency. Effective when the temperature rises or when running outdoors during the day.
CHF 29.90
Auf Lager  
+ −
Graphite molded LC Gearbox SO1.0/2.0
YOK-Z2-302TLCG
This is the LC gearbox for the SO series of 2WD off-road cars. Graphite-mixed resin, which is harder than standard, is used to increase the rigidity of the rear area. Especially when the throttle is turned on, there is less yawing and snagging, allowing for sharper cornering.
CHF 17.90
Auf Lager  
+ −
LCG short Li-po enabled Graphite Battery Holder
YOK-B10-118G1A
entspricht: B10-118G1
CHF 87.90
Auf Lager  
+ −
LED Set für BN Sports Toyota JZX100 Mark2
YOK-SD-JZXBNL
This LED set is designed for the BN Sport Mark II. The set includes 6 each of white/red/yellow bullet-type LEDs for headlights, tail lights, and position/wind indicators, and comes with a wiring terminal, extension cable, and connector cable. By drilling holes with a reamer, etc. in the light...
CHF 43.90
Auf Lager  
+ −
Front Balance Weight (L/R 1 each·10g)
YOK-B7-BWF10
CHF 29.90
Auf Lager  
+ −
Rear Shock Tower 2016
YOK-B7-01816
 
CHF 21.90
Auf Lager  
+ −
Suspension Mount messing 44.9mm 13.3gr.
YOK-B7-3149BB
Brass -1mm lower suspension mount (44.9mm·13.3g)
CHF 21.90
Auf Lager  
+ −
Steering hub carrier / bushing YZ-2 DTM3.1/CAL3.1
YOK-Z2-413G3A
Graphite molded steering hub carrier for YZ-2 DTM3.1 / CAL3.1. The kingpin position has been changed to the front side compared to the past, and the shape has been changed to attach the steering stopper. Uses graphite resin, which is harder than the standard, and improves steering response.
CHF 17.90
Auf Lager  
+ −
Center Balance Weight
YOK-B9-BW30A
30g
CHF 21.90
Auf Lager  
+ −
BD-919/BD10/BD10LC Axle/Spacer for AXON Super Hub
YOK-B10-WHAS1A
BD-919/BD10/BD10LC Axle/Spacer for AXON Super Hub Axle
CHF 21.90
Auf Lager  
+ −
Steering Block BD9/BD10
YOK-B9-415SA
entspricht: B9-415S
CHF 11.50
Auf Lager  
+ −
Rear Roll Damper Mount (Left) YR-22L
YOK-YR-22L
 
CHF 17.50
Auf Lager  
+ −
Rear Lower Suspension Arm 39.5mm Extra Hard BD-8
YOK-BD-008RE1
This is intended for increasing the steering response in order to increase the cornering speed at high grip surface condition.
CHF 12.50
Auf Lager  
+ −
Rear hub carrier/Bushing (F3 pin/Hard type) DTM3/C
YOK-Z2-415RDCA
Hard type
CHF 11.50
Auf Lager  
+ −
Aluminum steering belcrunk
YOK-Z2-201BA
 
CHF 28.90
Auf Lager  
+ −
Rear suspension arm Type-B (F3 outer pin) for YZ-2
YOK-Z2-008R3A
F3 Outer pin spec
CHF 7.90
Auf Lager  
+ −
YD-4 Solid/One Way FCD Gear Set (Front x 0.59)
YOK-Y4-64359
 
CHF 28.90
Auf Lager  
+ −
Aluminum Servo Mount SO3.0
YOK-SO-203
CHF 28.90
Auf Lager  
+ −
steel rear suspension mount for YZ-2T / YZ-2 (fron
YOK-Z2-300RFSA
This is a steel suspension mount for the YZ-2 series.
CHF 26.90
Auf Lager  
+ −
Graphite Rear Axle for World conversion
YOK-R12-24SN
 
CHF 42.90
Auf Lager  
+ −
Titanium turn buckle set for YZ-2DTM3
YOK-Z2-TBSD3A
with Wrench
CHF 42.90
Auf Lager  
+ −
Chassis balance weight for YZ-2T
YOK-Z2-002RWTA
entspricht: Z2-002RWT
CHF 16.50
Nicht auf Lager
Rear ESC mount for YD-2 series
YOK-Y2-REM-RA
A ESC mount set that can change the weight balance of the chassis by mounting the ESC on the rear overhang and greatly enhance the rear traction. Especially effective on roads with low grip, the load applied to the rear tires at the corner exit is overwhelming! It is possible to get a...
CHF 42.90
Auf Lager  
+ −
Alu Servohebel 23mm Clamp 25T Spline
YOK-Y2-204523A
entspricht: Y2-204523
CHF 18.90
Auf Lager  
+ −
Aluminum suspension mount set for RD2.0
YOK-RD-301AS
This aluminum suspension mount set for RD2.0 further enhances driving performance. The B width for the front is 43.5mm standard, and the D width for the rear is 57.2mm standard for both the front and rear sides, but the suspension pin width can be fine-tuned by changing the suspension mount...
CHF 85.50
Auf Lager  
+ −
Aluminum center mount for BD10F
YOK-B10-302CMA
entspricht: B10-302CM
CHF 84.90
Auf Lager  
+ −
Aluminum Susp M Spacer 1.0mm BD7/BD8/BD9/BD10
YOK-B7-SS10A
entspricht: B7-SS10
CHF 17.90
Auf Lager  
+ −
Alum.Main Chassis for MO Series
YOK-MO-002
CHF 84.90
Auf Lager  
+ −
Alum.Main Chassis for MO3.0
YOK-MO-002-3
CHF 84.90
Auf Lager  
+ −
Kingpin set YZ-2
YOK-Z2-414A
 
CHF 7.90
Auf Lager  
+ −
Aluminum Separate Suspension Mount (44.2mm)
YOK-B7-30142
 
CHF 16.90
Auf Lager  
+ −
Brass Rear H Arm Weight A (10g)
YOK-Y2-008RW10
This optional part for the RD2.0/SD2.0 combines an aluminum rear H-arm with a brass weight to systematically increase rear traction. By mounting the weight on the rigid aluminum H-arm, the unsprung weight, which is directly loaded on the rear tires, is increased, effectively increasing tire...
CHF 41.90
Auf Lager  
+ −
Side diffuser set for YD-2S
YOK-Y2-001SDA
Sideways grip feel will be improved.
CHF 19.90
Auf Lager  
+ −
Turnbucke Upper Arm Set for MS1.0
YOK-MS-008T
This is a turnbuckle adjustable upper arm set that makes the most of the MS1.0's greatest feature, the linkage-type upper A-arm. This single set of front and rear upper arms allows for camber changes as well as fine caster angle adjustments.
CHF 41.90
Auf Lager  
+ −
Front W/J Universal Set (Bearing type)
YOK-MS-010FWS
Universal Design with bearings mounted on the dogbones to reduce sliding resistance with the joint axle to the upmost limit. This reduces drive loss and stabilizes suspension operation, thereby increasing cornering speed.
CHF 83.80
Auf Lager  
+ −
Steering Block L/R YZ-4
YOK-Z4-415SA
 
CHF 8.90
Auf Lager  
+ −
Aluminium Radträger 2Stk. MS2.0
YOK-MS-415A-2
CHF 41.90
Auf Lager  
+ −
YD-2/BD8 Brass Sus holder A (39.5~42.7mm)
YOK-TS-2149
Please be announced the new items made by brass for BD-8 and YD-2 series.
CHF 27.90
Auf Lager  
+ −
Front/Rear wing mount for YZ-2DTM3/CAL3
YOK-Z2-001W3A
entspricht: Z2-001W3
CHF 10.90
Auf Lager  
+ −
Aluminum Center Link BD9/BD10
YOK-B9-201LBAA
including Ball bearing
CHF 27.90
Auf Lager  
+ −
BD-10 Rear stabilizer wire set  (f (f1.1/1.2/1.3mm)
YOK-B10-412RWA
entspricht: B10-412RW
CHF 27.90
Auf Lager  
+ −
Yokomo Alu Wing Stay silber
YOK-D-056A
entspricht: D-056
CHF 12.90
Auf Lager  
+ −
Rear stabilizer wire set for B-MAX4III
YOK-B4-412RW
 
CHF 13.90
Auf Lager  
+ −
Flex Gear Differential Oil(35cc) DOT2
YOK-CS-DOT2
Oel-Vergleichstabelle #650 = DOT1 #800 = DOT2 #1000 = DOT3 #1200 = DOT4 #1600 = DOT5 #2100 = DOT6 #3000 = DOT7
CHF 11.90
Auf Lager  
+ −
Aluminium 8.0mm cramp wheel hub for YD-2
YOK-Y2-011CB8A
entspricht: Y2-011CB8
CHF 12.90
Auf Lager  
+ −
Alu F/R Upper Arm Mount L/R YZ4-SF
YOK-S4-300UMA
entspricht: S4-300UM
CHF 41.50
Auf Lager  
+ −
Front Wheel
YOK-B4-821A
entspricht: B4-821
AuswahlhilfeBuggy MaterialKunststoff Reifen/Rad-TypFelgen Massstab1:10 EinsatzOff-Road
CHF 5.90
Auf Lager  
+ −
F3.5 Suspension arm pin bush for YZ-2DTM3/CAL3
YOK-Z2-300BSA
for F3.5 inner pin
CHF 12.90
Auf Lager  
+ −
YOKOMO Factory T-Shirt XL size
YOK-ZC-T27XLA
entspricht: ZC-T27XL
CHF 27.40
Auf Lager  
+ −
Graphite Front Upper Arm Support YR-10US
YOK-YR-10US
 
CHF 13.50
Auf Lager  
+ −
YZ-2 CAL2 S2 LW Karosserie (w. masking)
YOK-Z2-DTMBLA
entspricht: Z2-DTMBL
CHF 27.90
Auf Lager  
+ −
Upper Deck
YOK-B7-00314
 
CHF 26.90
Auf Lager  
+ −
Bulk Head A (Front Left/Rear Right/Black)
YOK-B7-302A15
 
CHF 26.90
Auf Lager  
+ −
Alu Cap for Gear Diff Case YD-2/YZ-2
YOK-Z2-503GHCA
entspricht: Z2-503GHC
CHF 15.90
Auf Lager  
+ −
Bell Crank Bridge black
YOK-B7-201B6
 
CHF 26.90
Auf Lager  
+ −
BD-10 Front stabilizer wire set  (f (f1.2/1.3/1.4mm)
YOK-B10-412FWA
entspricht: B10-412FW
CHF 26.90
Auf Lager  
+ −
3holes Spur Gear 80T YZ-2
YOK-Z2-SG80SDA
entspricht: Z2-SG80SD
CHF 8.50
Auf Lager  
+ −
Verfügbarkeit
Verfügbar beim Lieferanten
Abmessungen
Auswahlhilfe
Material
Preis
CHF
–
CHF
  • CHF 1.5
  • CHF 849
Reifen/Rad-Typ
Servo-Typ
Verwendung
Massstab
Motor / Antrieb
Einsatz
Anspruch
Lackierung
Fertigungsgrad
Max. Geschwindigkeit
Marke
Betriebsspannung