ERSATZTEIL-FINDER

Yokomo

Ordnen nach:
Empfohlen
96
RTC Aluminum hub carrier for BD10/9
YOK-B10-RTC-3A
entspricht: B10-RTC-3
CHF37.90
Auf Lager  
+ −
Aluminum Light Weight SP Steering Block RD/SD
YOK-Y2-415SAA
The 0 offset steering block adopted from SD2.0, which has been well-received for its neutral steering characteristics, is now made of aluminum to enhance steering response.
CHF37.90
Auf Lager  
+ −
Steering Block L/R YZ-4
YOK-Z4-415SA
 
CHF8.90
Auf Lager  
+ −
Front Double Joint/Pin
YOK-B7-010TWC
CHF18.90
Auf Lager  
+ −
Alu Separate Susp. Mount 44.2mm
YOK-B7-3142BS
 
CHF18.90
Auf Lager  
+ −
Aero S Type Rear Wing DTM2
YOK-Z2-DTM2WA
entspricht: Z2-DTM2W
CHF14.90
Auf Lager  
+ −
Graphite Main Chassis YR-02
YOK-YR-02
 
CHF74.90
Auf Lager  
+ −
Aluminium Center Link YZ-4
YOK-Z4-201CL
 
CHF32.50
Auf Lager  
+ −
Center Gear Giff.Assembbly for B-YZ4SF
YOK-S4-504
CHF74.90
Auf Lager  
+ −
Aluminum motor mount BD11
YOK-B11-302MA
entspricht: B11-302M
CHF74.90
Auf Lager  
+ −
Rear suspension arm (Graphite molded) YZ4SF
YOK-S4-008RS4A
entspricht: S4-008RS4
CHF12.50
Auf Lager  
+ −
Brass rear hub carrier for YD-2 series
YOK-Y2-415RBA
It is a rear hub carrier that can be used in common with the YD-2 series. Made from heavy brass, it greatly increases the unsprung weight that directly loads the tire, increasing rear traction.
CHF74.90
Auf Lager  
+ −
YZ-4 High Flex Graphite upper deck
YOK-Z4-003S
 
CHF24.90
Auf Lager  
+ −
Aluminum Gear Differential Case (with 38T pulley)
YOK-MS-503GHA
Used in place of the standard plastic gear diff case, this aluminum diff case increases diff oil heat dissipation and stabilizes operating effectiveness. Especially during the summer season, it can prevent oversteer due to low differential oil viscosity and stabilize lap times. The pulley part is...
CHF64.90
Auf Lager  
+ −
BD-10 Rear Stiffner (Steel)
YOK-B10-302SA
entspricht: B10-302S
CHF24.90
Auf Lager  
+ −
Alum.Front Bulk Head (Right) for MO Series
YOK-MO-002FR
CHF24.90
Auf Lager  
+ −
Main Gear Shaft Titanium Coated BD8
YOK-B8-644T
 
CHF14.90
Auf Lager  
+ −
Hex socket Rod End Ball (L Size/14.7mm)
YOK-ZC-206LHA
entspricht: ZC-206LH
CHF6.90
Auf Lager  
+ −
Shock adjust nut/O ring/O ring cap BD9/BD10
YOK-B9-S4C2A
entspricht: B9-S4C2
CHF14.90
Auf Lager  
+ −
Alu bulk head C for 40T pulley
YOK-B8-32C40
 
CHF36.90
Auf Lager  
+ −
Aluminum suspension mount for YZ-2T
YOK-Z2-300RFTA
entspricht: Z2-300RFT
CHF22.90
Auf Lager  
+ −
Graphite front lower suspension arms (left) BD11
YOK-B11-008FLA
entspricht: B11-008FL
CHF36.90
Auf Lager  
+ −
Front Wheel (White)
YOK-B4-821WA
entspricht: B4-821W
CHF6.40
Auf Lager  
+ −
Graphite rear lower suspension arms (left) BD11
YOK-B11-008RLA
entspricht: B11-008RL
CHF36.90
Auf Lager  
+ −
Graphite rear lower suspension arms (right) BD11
YOK-B11-008RRA
entspricht: B11-008RR
CHF36.90
Auf Lager  
+ −
Aluminium Servo Mount YD-4
YOK-Y4-203AA
 
CHF23.90
Auf Lager  
+ −
Graphite front lower suspension arm (L) +0.5mm
YOK-B11-008FL1
This suspension arm was used by team drivers and achieved good results at the 2023 IFMAR World Championship. The front is 0.5mm longer than the standard of the first generation BD11, improving steering response and turning performance. It also reduces the burden on the front tires, so it is...
CHF36.90
Auf Lager  
+ −
Graphite rear lower suspension arm (R) -1.0mm
YOK-B11-008RR1
This suspension arm was used by team drivers and achieved good results at the 2023 IFMAR World Championship. It is 1mm shorter than standard, making it easier for the roll force to work to improve traction. It is especially suitable for road conditions with low grip, such as outdoor asphalt,...
CHF36.90
Auf Lager  
+ −
Rear Drive Belt
YOK-BD-189LA
entspricht: BD-189L
CHF6.75
Auf Lager  
+ −
Graphite rear lower suspension arm (L)-1.0mm
YOK-B11-008RL1
This suspension arm was used by team drivers and achieved good results at the 2023 IFMAR World Championship. It is 1mm shorter than standard, making it easier for the roll force to work to improve traction. It is especially suitable for road conditions with low grip, such as outdoor asphalt,...
CHF36.90
Auf Lager  
+ −
Bell crank (F8×F5 bearing assembled)
YOK-B7-202SB
 
CHF35.90
Auf Lager  
+ −
Aluminum wing plate
YOK-B7-110A
entspricht: B7-110
CHF12.90
Auf Lager  
+ −
Front Univ. Shaft 79mm YZ-4
YOK-Z4-01079
 
CHF35.90
Auf Lager  
+ −
Slide Rack YD-4
YOK-Y4-202R
 
CHF35.90
Auf Lager  
+ −
F3.5 Suspension arm pin bush for YZ-2DTM3/CAL3
YOK-Z2-300BSA
for F3.5 inner pin
CHF12.90
Auf Lager  
+ −
Aluminum front lower bulkhead (A) BD11
YOK-B11-32FLAA
entspricht: B11-32FLA
CHF35.90
Auf Lager  
+ −
Aluminum front lower bulkhead (B) BD11
YOK-B11-32FLBA
entspricht: B11-32FLB
CHF35.90
Auf Lager  
+ −
Rear suspension arm for YZ-2T
YOK-Z2-008RTA
entspricht: Z2-008RT
CHF14.00
Auf Lager  
+ −
Brass center stiffener for BD12
YOK-B12-302CSB
CHF35.90
Auf Lager  
+ −
Front W/J Universal Assy. (Bearing type/1pcs.)
YOK-MS-010FW
CHF35.90
Auf Lager  
+ −
GOKURAKU wing 4.0
YOK-B7-GW40A
entspricht: B7-GW40
CHF9.90
Auf Lager  
+ −
Alum.St.Bellcrank set for RO1.0/SO1.0
YOK-Z2-201SBS
This is an aluminum bell crank set that gives the RO1.0/SO1.0 steering even sharper.
CHF71.80
Auf Lager  
+ −
Aluminum Steering Bell Crank L/R SD3.0
YOK-SD-202S3
CHF35.90
Auf Lager  
+ −
Ball End Cap YD-4
YOK-Y4-207A
entspricht: Y4-207
CHF9.90
Auf Lager  
+ −
Alum.Servo Mount for MO2.0
YOK-MO-203A
CHF23.90
Auf Lager  
+ −
Aluminum Rear Shock Lower Adapter RD2.0
YOK-RD-008RS
This Aluminum mounting Adapter holds the lower rear shock of the RD2.0. By increasing the rigidity of the shock mounting, it improves operationg precision and increaser road-following performance against minor vibrations. It is also heavier than the standard plastic one, which tends to increase...
CHF23.90
Auf Lager  
+ −
Alu Shim 3x6x3.0mm (Black)
YOK-ZC-A3630BA
entspricht: ZC-A3630B
CHF5.90
Auf Lager  
+ −
Alminum Suspension mount (43.5mm·Black)
YOK-B7-3135B
 
CHF17.90
Auf Lager  
+ −
Aluminum Separate Suspension Mount (42.0mm)
YOK-B7-3120BS
 
CHF17.90
Auf Lager  
+ −
Fluorine Rubber Diaphragm für SLF Short Shock II
YOK-B7-8DF16
CHF5.90
Auf Lager  
+ −
Graphite molded front steering hub carrier BD12
YOK-B12-413G
CHF17.90
Auf Lager  
+ −
Camber Gauge PRO (Black)
YOK-YT-CGPA
entspricht: YT-CGP
CHF16.90
Auf Lager  
+ −
Graphite molded LC Gearbox SO1.0/2.0
YOK-Z2-302TLCG
This is the LC gearbox for the SO series of 2WD off-road cars. Graphite-mixed resin, which is harder than standard, is used to increase the rigidity of the rear area. Especially when the throttle is turned on, there is less yawing and snagging, allowing for sharper cornering.
CHF17.90
Auf Lager  
+ −
Flex Gear Differential Oil(35cc) DOT5
YOK-CS-DOT5
Oel-Vergleichstabelle #650 = DOT1 #800 = DOT2 #1000 = DOT3 #1200 = DOT4 #1600 = DOT5 #2100 = DOT6 #3000 = DOT7
CHF11.90
Auf Lager  
+ −
Nickel hard steel turn buckle 48mm 2stk.
YOK-SD-TB48NA
entspricht: SD-TB48N
CHF4.50
Nicht auf Lager
Front Shock Tower B7 2016
YOK-B7-01716
 
CHF17.50
Auf Lager  
+ −
Rear Roll Damper mount (right Side) YR-22R
YOK-YR-22R
 
CHF17.50
Auf Lager  
+ −
Ball differential kit for MR/RS
YOK-B2-500MR
 
CHF49.90
Auf Lager  
+ −
Sparen Sie 41%
Sparen Sie 41%
SCR-BL Fahrtenregler für brushed Motoren
YOK-SCR-BL
AKTION SOLANGE VORRAT This is a speed controller dedicated to brush motors, which is very popular among beginners and intermediate players. This model was also used in Yokomo's pre-assembled competition off-road car, and it is equipped with a large heat sink, making it a tough performance...
CHF59.00 CHF35.00
Sie sparen: CHF24.00
Auf Lager  
+ −
Double Joint Front Universal
YOK-B7-010FWC
Yokomo released new Double Joint Front Universal for our 1/10 sized touring car BD7.
CHF69.90
Auf Lager  
+ −
Hybrid front shock tower YD-2 rot
YOK-Y2-017AGRA
A front shock tower that fits into all YD-2 series cars. The upper shock tower ensures sufficient rigidity by being lightweight and highly rigid graphite with 3 mm thick. The upper arm holder is made of aluminum to increase rigidity and accuracy. The lineup includes three colors of black / red /...
CHF49.90
Auf Lager  
+ −
Front ”X33” Shock set for YZ-2 series
YOK-Z2-S1S2A
entspricht: Z2-S1S2
CHF69.90
Auf Lager  
+ −
Drive Cup Protector BD9/BD10
YOK-B9-500DPA
(Hard)
CHF6.50
Auf Lager  
+ −
BD-10 Motor (Motor Mount
YOK-B10-302MA
entspricht: B10-302M
CHF69.90
Auf Lager  
+ −
Case for Parts (190×225×40mm)
YOK-YC-7A
entspricht: YC-7
CHF19.90
Auf Lager  
+ −
Main Chassis B-Max
YOK-BM-002
 
CHF34.90
Auf Lager  
+ −
Battery holder set
YOK-B7-11815
 
CHF34.90
Auf Lager  
+ −
Body Mount Set
YOK-BD-016
CHF6.90
Auf Lager  
+ −
Center Bulkhead (Right)
YOK-B9-302RA
entspricht: B9-302R
CHF34.90
Auf Lager  
+ −
Racing Performer F3.5 Bullet/Female Connecter set
YOK-RP-107A
3.5mm diameter banana connector used for motor connection. Set of 3 male/female set
CHF8.00
Nicht auf Lager
Special motor mount for YD-2Z series (red)
YOK-Y2-304ZSRA
Special motor mount for YD-2Z series. The aluminum heat sink shape has a high cooling effect and efficiently cools the motor during drift driving, which tends to heat up. By rotating around the top shaft, the YD-2Z can select the motor position from 13 places depending on the chassis...
CHF34.90
Auf Lager  
+ −
Front/Rear wing mount for YZ-2DTM3/CAL3
YOK-Z2-001W3A
entspricht: Z2-001W3
CHF10.90
Auf Lager  
+ −
Graphite high mount battery plate
YOK-Y2-118PL
CHF34.90
Auf Lager  
+ −
Matte Graphite Upper Deck YZ-870C
YOK-YZ-003G
Graphite parts that further enhance the performance of the YZ-870c Super Dogfighter are now available. The lightweight and highly rigid graphite material has a matte black surface finish that does not detract from the machine's image. In addition to parts that upgrade existing FRP parts such as...
CHF34.90
Auf Lager  
+ −
Front inner suspension pin
YOK-B2-009BFA
entspricht: B2-009BF
CHF5.50
Auf Lager  
+ −
Slipper Drive Cup
YOK-BM-670D
 
CHF13.90
Auf Lager  
+ −
TOYOTA 86 Wheel 1:10 2stk. 24mm
YOK-TW-SS86
 
Auswahlhilfe190mm Touring MaterialGummi Reifen/Rad-TypFelgen Massstab1:10 EinsatzOn-Road
CHF9.90
Auf Lager  
+ −
Graphite upper deck for BD10F
YOK-B10-003FA
entspricht: B10-003F
CHF23.10
Auf Lager  
+ −
Suspension Mount Bush / Bamper / B Mount
YOK-B4-300B
 
CHF12.10
Auf Lager  
+ −
Racing Performer Charger Cable 5mm/4mm
YOK-RP-094A
entspricht: RP-094
CHF22.90
Auf Lager  
+ −
Graphite rear shock tower for YZ-2DTM3/CAL3
YOK-Z2-018-3A
3mm Lowered
CHF22.90
Auf Lager  
+ −
Front Wheel
YOK-B4-821A
entspricht: B4-821
CHF5.90
Auf Lager  
+ −
Alum.Bulk Head Cap for MO Series
YOK-MO-002BC
CHF22.90
Auf Lager  
+ −
Titanium Turnbuckle Set for YZ-870C
YOK-YZ-TBS87
Titanium turnbuckle set for the vintage off-road car YZ-870C Super Dogfighter. Set includes 6 x 36mm for upper arms and tie rods, and 30mm for servo rods.
CHF34.20
Auf Lager  
+ −
Aluminum Susp M Spacer(0.5mm)BD7/BD8/BD9/BD10
YOK-B7-SS05A
 
CHF16.90
Auf Lager  
+ −
Steering Block
YOK-SD-415SA
entspricht: SD-415S
CHF8.50
Auf Lager  
+ −
Aluminum Steering Bell Crunk (Dirt Version)
YOK-Z2-201BSD
CHF67.90
Auf Lager  
+ −
Aluminum Suspension Mount Spacer(0.8mm)
YOK-B7-SS08A
entspricht: B7-SS08
CHF16.90
Auf Lager  
+ −
Aluminum front lower short A arm set (Purple/Bevel
YOK-Y2-P08FSCA
CHF67.90
Auf Lager  
+ −
Bulkhead C (Front Right/Rear left black) 2016
YOK-B7-302C16
 
CHF33.90
Auf Lager  
+ −
Karosserie YZ-4 inkl. Maskierfolie
YOK-Z4-101
 
AuswahlhilfeBuggy Massstab1:10 EinsatzOff-Road Lackierungunlackiert HerstellerYokomo
CHF31.90
Auf Lager  
+ −
Upper Bulkhead (A) BD9/BD10
YOK-B9-32UA19A
(F Left /R Right)
CHF33.90
Auf Lager  
+ −
Upper Bulkhead (B) BD9/BD10
YOK-B9-32UB19A
(F rRiht /R Left)
CHF33.90
Auf Lager  
+ −
Rear short shock shaft (titanium coat) for YZ-2DTM
YOK-S4-S2MTA
A shock shaft that can be used on the rear of the YZ-2DTM3 / CAL3 and the front of the YZ-2T. The shaft diameter is F3.0mm, which is thinner than the standard F3.3mm, and it is possible to reduce friction and enhance the shock absorption effect. Since the shaft surface is coated with titanium,...
CHF23.50
Auf Lager  
+ −
Short spring cup for BD8 SLF short shock II (4pcs/
YOK-B8-S3S
This new short sprig has intended for the combination with new Racing performer Ultra Spring series.
CHF16.90
Auf Lager  
+ −
3holes Spur Gear 80T YZ-2
YOK-Z2-SG80SDA
entspricht: Z2-SG80SD
CHF8.50
Auf Lager  
+ −
Verfügbarkeit
Verfügbar beim Lieferanten
Abmessungen
Auswahlhilfe
Material
Preis

CHF  –  CHF

  • ‎CHF1.5
  • ‎CHF999
Reifen/Rad-Typ
Servo-Typ
Verwendung
Massstab
Motor / Antrieb
Einsatz
Anspruch
Lackierung
Fertigungsgrad
Max. Geschwindigkeit
Marke
Betriebsspannung
Zurücksetzen (reset)