Français (CH)
ERSATZTEIL-FINDER

Yokomo

Trier par:
Recommandé
Montrer:
96
Adapter
YOK-YT-TSG
 
CHF 38.90
En stock
+ −
Alu Front Steering Hub Carrier YD-4
YOK-Y4-413C
 
CHF 38.90
En stock
+ −
F3.5 Suspension arm pin bush for YZ-2DTM3/CAL3
YOK-Z2-300BSA
for F3.5 inner pin
CHF 12.90
En stock
+ −
BD-10 Main Drive (Main Drive Pulley
YOK-B10-630MA
entspricht: B10-630M
CHF 25.90
En stock
+ −
Alu Sturzwinkel und Höhenmesser schwarz
YOK-YT-HCGBA
entspricht: YT-HCGB
CHF 25.90
En stock
+ −
Turnbucke Upper Arm Set for MS1.0
YOK-MS-008T
This is a turnbuckle adjustable upper arm set that makes the most of the MS1.0's greatest feature, the linkage-type upper A-arm. This single set of front and rear upper arms allows for camber changes as well as fine caster angle adjustments.
CHF 41.90
En stock
+ −
MO2.0 Body Shell w/Mask. (LW) for MO Series
YOK-MO-101LW
CHF 25.90
En stock
+ −
RTC Lower Caster block
YOK-B9-RTC-02A
Aluminum made
CHF 38.50
En stock
+ −
Rear Universal Set (Bearing type)
YOK-MS-010RS
Universal Design with bearings mounted on the dogbones to reduce sliding resistance with the joint axle to the upmost limit. This reduces drive loss and stabilizes suspension operation, thereby increasing cornering speed.
CHF 77.00
En stock
+ −
YZ-2 CAL2 S2 LW Karosserie (w. masking)
YOK-Z2-DTMBLA
entspricht: Z2-DTMBL
CHF 27.90
En stock
+ −
Graphite Main Chassis YRX12
YOK-YX-02
 
CHF 76.90
En stock
+ −
Aluminum motor mount for BD12
YOK-B12-302M
CHF 76.90
En stock
+ −
Alu Cap for Gear Diff Case YD-2/YZ-2
YOK-Z2-503GHCA
entspricht: Z2-503GHC
CHF 15.90
En stock
+ −
Steel Spool Drive Cup (Bearing type/1pcs.)
YOK-MS-501MCS
CHF 12.80
En stock
+ −
Front Wheel
YOK-B4-821A
entspricht: B4-821
AuswahlhilfeBuggy MaterialKunststoff Reifen/Rad-TypFelgen Massstab1:10 EinsatzOff-Road
CHF 5.90
En stock
+ −
“X30”shock X ring(3.0mm)
YOK-S4-S3XA
entspricht: S4-S3X
CHF 6.50
En stock
+ −
Alu Top Shaft (Hard anodized) YZ-4
YOK-Z4-303TA
 
CHF 10.90
En stock
+ −
Aluminum Servo Mount BD9/BD10
YOK-B9-203BA
entspricht: B9-203B
CHF 37.90
En stock
+ −
Lower Bulkhead (A) BD9/BD10
YOK-B9-32LA19A
(F Left /R Right)
CHF 37.90
En stock
+ −
Aero S Type Rear Wing DTM2
YOK-Z2-DTM2WA
entspricht: Z2-DTM2W
CHF 14.90
RTC Aluminum hub carrier for BD10/9
YOK-B10-RTC-3A
entspricht: B10-RTC-3
CHF 37.90
En stock
+ −
Aluminum Light Weight SP Steering Block RD/SD
YOK-Y2-415SAA
The 0 offset steering block adopted from SD2.0, which has been well-received for its neutral steering characteristics, is now made of aluminum to enhance steering response.
CHF 37.90
En stock
+ −
Aluminium Center Link YZ-4
YOK-Z4-201CL
 
CHF 32.50
En stock
+ −
Alu lightweight SP Steering Block RD/SD Blue
YOK-Y2-415SABL
This is a color version of the Offset 0 steering block for the RD/SD series, which has been well- eceived for its neutral characteristics, and now comes in three new colors: blue, purple, and red to match the machine color. Compared to the standard plastic blocks, the aluminum version is much...
CHF 37.90
En stock
+ −
Front Double Joint/Pin
YOK-B7-010TWC
CHF 18.90
En stock
+ −
Rear suspension arm (Graphite molded) YZ4SF
YOK-S4-008RS4A
entspricht: S4-008RS4
CHF 12.50
En stock
+ −
Alu Separate Susp. Mount 44.2mm
YOK-B7-3142BS
 
CHF 18.90
En stock
+ −
Graphite Main Chassis YR-02
YOK-YR-02
 
CHF 74.90
En stock
+ −
Center Gear Giff.Assembbly for B-YZ4SF
YOK-S4-504
CHF 74.90
En stock
+ −
Fluorine Rubber Diaphragm für SLF Short Shock II
YOK-B7-8DF16
CHF 5.90
En stock
+ −
Aluminum motor mount BD11
YOK-B11-302MA
entspricht: B11-302M
CHF 74.90
En stock
+ −
Camber Gauge PRO (Black)
YOK-YT-CGPA
entspricht: YT-CGP
CHF 16.90
En stock
+ −
Brass rear hub carrier for YD-2 series
YOK-Y2-415RBA
It is a rear hub carrier that can be used in common with the YD-2 series. Made from heavy brass, it greatly increases the unsprung weight that directly loads the tire, increasing rear traction.
CHF 74.90
En stock
+ −
YZ-4 High Flex Graphite upper deck
YOK-Z4-003S
 
CHF 24.90
En stock
+ −
Aluminum suspension mount for YZ-2T
YOK-Z2-300RFTA
entspricht: Z2-300RFT
CHF 22.90
En stock
+ −
Yokomo T-Shirt Grösse M
YOK-ZC-T27MA
entspricht: ZC-T27M
CHF 24.90
En stock
+ −
Drive Cup Protector BD9/BD10
YOK-B9-500DPA
(Hard)
CHF 6.50
En stock
+ −
BD-10 Rear Stiffner (Steel)
YOK-B10-302SA
entspricht: B10-302S
CHF 24.90
En stock
+ −
Maintenance kit for double joints BD11
YOK-B11-010TWA
entspricht: B11-010TW
CHF 24.90
En stock
+ −
Rear Drive Belt
YOK-BD-189LA
entspricht: BD-189L
CHF 6.75
En stock
+ −
Main Gear Shaft Titanium Coated BD8
YOK-B8-644T
 
CHF 14.90
En stock
+ −
Shock adjust nut/O ring/O ring cap BD9/BD10
YOK-B9-S4C2A
entspricht: B9-S4C2
CHF 14.90
En stock
+ −
Ball End Cap YD-4
YOK-Y4-207A
entspricht: Y4-207
CHF 9.90
En stock
+ −
Racing Tool Allen Driver set /Red
YOK-YT-YRTSRA
entspricht: YT-YRTSR
CHF 24.80
En stock
+ −
Alu bulk head C for 40T pulley
YOK-B8-32C40
 
CHF 36.90
En stock
+ −
Nickel hard steel turn buckle 48mm 2stk.
YOK-SD-TB48NA
entspricht: SD-TB48N
CHF 4.50
Graphite front lower suspension arms (left) BD11
YOK-B11-008FLA
entspricht: B11-008FL
CHF 36.90
En stock
+ −
Graphite rear lower suspension arms (left) BD11
YOK-B11-008RLA
entspricht: B11-008RL
CHF 36.90
En stock
+ −
Aluminium Servo Mount YD-4
YOK-Y4-203AA
 
CHF 23.90
En stock
+ −
Graphite rear lower suspension arms (right) BD11
YOK-B11-008RRA
entspricht: B11-008RR
CHF 36.90
En stock
+ −
Graphite front lower suspension arm (L) +0.5mm
YOK-B11-008FL1
This suspension arm was used by team drivers and achieved good results at the 2023 IFMAR World Championship. The front is 0.5mm longer than the standard of the first generation BD11, improving steering response and turning performance. It also reduces the burden on the front tires, so it is...
CHF 36.90
En stock
+ −
Aluminum wing plate
YOK-B7-110A
entspricht: B7-110
CHF 12.90
En stock
+ −
Graphite rear lower suspension arm (R) -1.0mm
YOK-B11-008RR1
This suspension arm was used by team drivers and achieved good results at the 2023 IFMAR World Championship. It is 1mm shorter than standard, making it easier for the roll force to work to improve traction. It is especially suitable for road conditions with low grip, such as outdoor asphalt,...
CHF 36.90
En stock
+ −
Graphite rear lower suspension arm (L)-1.0mm
YOK-B11-008RL1
This suspension arm was used by team drivers and achieved good results at the 2023 IFMAR World Championship. It is 1mm shorter than standard, making it easier for the roll force to work to improve traction. It is especially suitable for road conditions with low grip, such as outdoor asphalt,...
CHF 36.90
En stock
+ −
Rear suspension arm for YZ-2T
YOK-Z2-008RTA
entspricht: Z2-008RT
CHF 14.00
En stock
+ −
Main Chassis RO2.0
YOK-RO-002
CHF 36.90
En stock
+ −
Bell crank (F8×F5 bearing assembled)
YOK-B7-202SB
 
CHF 35.90
En stock
+ −
GOKURAKU wing 4.0
YOK-B7-GW40A
entspricht: B7-GW40
CHF 9.90
En stock
+ −
Front Univ. Shaft 79mm YZ-4
YOK-Z4-01079
 
CHF 35.90
En stock
+ −
Slide Rack YD-4
YOK-Y4-202R
 
CHF 35.90
En stock
+ −
Alu Shim 3x6x3.0mm (Black)
YOK-ZC-A3630BA
entspricht: ZC-A3630B
CHF 5.90
En stock
+ −
Aluminum front lower bulkhead (A) BD11
YOK-B11-32FLAA
entspricht: B11-32FLA
CHF 35.90
En stock
+ −
Aluminum front lower bulkhead (B) BD11
YOK-B11-32FLBA
entspricht: B11-32FLB
CHF 35.90
En stock
+ −
Rear short shock shaft (titanium coat) for YZ-2DTM
YOK-S4-S2MTA
A shock shaft that can be used on the rear of the YZ-2DTM3 / CAL3 and the front of the YZ-2T. The shaft diameter is F3.0mm, which is thinner than the standard F3.3mm, and it is possible to reduce friction and enhance the shock absorption effect. Since the shaft surface is coated with titanium,...
CHF 23.50
En stock
+ −
Aluminum Steering Bell Crank L/R SD3.0
YOK-SD-202S3
CHF 35.90
En stock
+ −
Pulley 42T MS2.0
YOK-MS-503GP-2
CHF 35.90
En stock
+ −
Front inner suspension pin
YOK-B2-009BFA
entspricht: B2-009BF
CHF 5.50
En stock
+ −
Alum.Servo Mount for MO2.0
YOK-MO-203A
CHF 23.90
En stock
+ −
Magnet Front Body Mount Red
YOK-ZS-016MGFR
We now offer color variations of the magnetic body mounts that drift car users love to use. Previously available only in black anodized aluminum, three new colors are now available: blue, purple, and red to match your machine color. Both the front and rear mounts are attached to the shock towers,...
CHF 23.90
En stock
+ −
Ball differential kit for MR/RS
YOK-B2-500MR
 
CHF 49.90
En stock
+ −
Alminum Suspension mount (43.5mm·Black)
YOK-B7-3135B
 
CHF 17.90
En stock
+ −
Aluminum Separate Suspension Mount (42.0mm)
YOK-B7-3120BS
 
CHF 17.90
En stock
+ −
Case for Parts (190×225×40mm)
YOK-YC-7A
entspricht: YC-7
CHF 19.90
En stock
+ −
Graphite molded front steering hub carrier BD12
YOK-B12-413G
CHF 17.90
En stock
+ −
Flex Gear Differential Oil(35cc) DOT5
YOK-CS-DOT5
Oel-Vergleichstabelle #650 = DOT1 #800 = DOT2 #1000 = DOT3 #1200 = DOT4 #1600 = DOT5 #2100 = DOT6 #3000 = DOT7
CHF 11.90
En stock
+ −
Body Mount Set
YOK-BD-016
CHF 6.90
En stock
+ −
Front Double Joint Universal Maintenance Kit
YOK-MO-010WM
CHF 11.90
En stock
+ −
H12 Front Wheel (Yellow) leucht gelb
YOK-B2-821HYA
AuswahlhilfeBuggy MaterialKunststoff Reifen/Rad-TypFelgen Massstab1:10 EinsatzOff-Road
CHF 6.40
En stock
+ −
Curved Slide Rack Upper Deck for YD-2E series
YOK-Y2-202UDA
entspricht: Y2-202UD
CHF 41.90
En stock
+ −
Front Shock Tower B7 2016
YOK-B7-01716
 
CHF 17.50
En stock
+ −
Rear Roll Damper mount (right Side) YR-22R
YOK-YR-22R
 
CHF 17.50
En stock
+ −
3×7 Bearing (4pcs)
YOK-BB-730-4A
entspricht: BB-730-4
CHF 12.50
En stock
+ −
Double Joint Front Universal
YOK-B7-010FWC
Yokomo released new Double Joint Front Universal for our 1/10 sized touring car BD7.
CHF 69.90
En stock
+ −
BD-10 Motor (Motor Mount
YOK-B10-302MA
entspricht: B10-302M
CHF 69.90
En stock
+ −
Aluminum Susp M Spacer(0.5mm)BD7/BD8/BD9/BD10
YOK-B7-SS05A
 
CHF 16.90
En stock
+ −
Yokomo Pit Bag IV
YOK-YT-24BK4
Hand-held pit bag convenient for storing machines and peripheral equipment, with a large capacity to hold a 1/10-size drift car with the body attached, and a two-tiered inner box. Outer dimensions: about 26 x 31 x 52 cm Inner box dimensions: about 246 x 146 x 482 mm
CHF 69.90
En stock
+ −
Main Chassis B-Max
YOK-BM-002
 
CHF 34.90
En stock
+ −
Aluminum Suspension Mount Spacer(0.8mm)
YOK-B7-SS08A
entspricht: B7-SS08
CHF 16.90
En stock
+ −
Center Bulkhead (Right)
YOK-B9-302RA
entspricht: B9-302R
CHF 34.90
En stock
+ −
Special motor mount for YD-2Z series (red)
YOK-Y2-304ZSRA
Special motor mount for YD-2Z series. The aluminum heat sink shape has a high cooling effect and efficiently cools the motor during drift driving, which tends to heat up. By rotating around the top shaft, the YD-2Z can select the motor position from 13 places depending on the chassis...
CHF 34.90
En stock
+ −
Graphite high mount battery plate
YOK-Y2-118PL
CHF 34.90
En stock
+ −
Karosserie YZ-4 inkl. Maskierfolie
YOK-Z4-101
 
AuswahlhilfeBuggy Massstab1:10 EinsatzOff-Road Lackierungunlackiert HerstellerYokomo
CHF 31.90
En stock
+ −
Matte Graphite Upper Deck YZ-870C
YOK-YZ-003G
Graphite parts that further enhance the performance of the YZ-870c Super Dogfighter are now available. The lightweight and highly rigid graphite material has a matte black surface finish that does not detract from the machine's image. In addition to parts that upgrade existing FRP parts such as...
CHF 34.90
En stock
+ −
Slipper Drive Cup
YOK-BM-670D
 
CHF 13.90
En stock
+ −
Racing Performer Ultra Bearing Oil
YOK-RP-105A
Unlike conventional molybdenum-based oils, ULTRA Bearing Oil easily adheres to metal and can form a smooth and lubricate film on the surface. It has a special molecular structure which is no comparison with previous lubricants and can reduce the frictional resistance with its amazing lubrication...
CHF 14.90
En stock
+ −
Rear stabilizer wire set for B-MAX4III
YOK-B4-412RW
 
CHF 13.90
En stock
+ −
Verfügbarkeit
Verfügbar beim Lieferanten
Abmessungen
Auswahlhilfe
Material
Prix
CHF
–
CHF
  • CHF 1.5
  • CHF 849
Reifen/Rad-Typ
Servo-Typ
Verwendung
Massstab
Motor / Antrieb
Einsatz
Anspruch
Lackierung
Fertigungsgrad
Max. Geschwindigkeit
Marke
Betriebsspannung