ERSATZTEIL-FINDER

Yokomo

Ordnen nach:
Empfohlen
48
B-MAX4III Alu Steering Hub Carrier (15 degrees)
YOK-B4-413A15
 
CHF47.90
Auf Lager  
+ −
Front & Undertray diffuser set for YD-2 /4 series
YOK-Y2-001BDA
Greatly improve the front grip and turning performance of the chassis when entering a corner or
CHF19.90
Auf Lager  
+ −
MIP Pucks Aluminum diff ring hub for YZ-2 Stock ve
YOK-Z2-18842
CHF47.90
Auf Lager  
+ −
YD-2 Aluminum Integral Front bulkhead
YOK-Y2-302D
Yokomo's new Integral aluminum front bulkhead was made to fit our very popular YD2 series of cars. This new bulkhead greatly helps improves the assembly accuracy in the front end of the car. Comparing to the standard bulkhead, this new bulkhead also helps provide a better steering feel...
CHF47.90
Auf Lager  
+ −
Rear motor conversion kit for YD-2 series
YOK-Y2-RMCA
Introducing the ultimate option for increasing rear traction and speed!
CHF47.90
Auf Lager  
+ −
Programmierkarte für RPXII
YOK-BL-RPXP2B
entspricht: BL-RPXP2A
CHF47.90
Auf Lager  
+ −
Lexus RC GT3 Clear Body for Touring Car
YOK-SP-LFGT3B
This real scale body fits just right for 190mm wide touring cars, and is a scale-down version of the LEXUS RCF GT3, complete with wing and decals,all officially approved by Toyota. The massive form and large rear wing provide a highly stable driving feel. It is also compatible with the...
MaterialLexan Auswahlhilfe190mm Touring Massstab1:10 EinsatzOn-Road Drift, On-Road Lackierungunlackiert
CHF47.90
Auf Lager  
+ −
Graphite front shock tower for YZ-2DTM3/CAL3
YOK-Z2-017-3A
3mm Lowered
CHF15.90
Auf Lager  
+ −
BD-10 Separate Rear Suspension Mount (Front (Brass)
YOK-B10-301SBA
entspricht: B10-301SB
CHF31.90
Auf Lager  
+ −
Lipo Bag Team Yokomo
YOK-YB-LSBB
Battery bag for charging and storing Li-po batteries. The flame-retardant material prevents the spread of fire in the unlikely event that the battery catches fire. It has a safe large capacity and can hold 6 short batteries, making it convenient for storage and transportation. Internal...
CHF23.90
Auf Lager  
+ −
L5/LD Rear suspension arm(TypeB/F3.5pin) YZ-4SF2
YOK-S4-008R5BA
entspricht: S4-008R5B
CHF11.90
Auf Lager  
+ −
SO1.0/2.0 High Traction Offset Rear Graphite
YOK-Z2-008R3GH
SO series rear lower suspension arm. By shortening the wheelbase by up to 7mm on the suspension arm side, The rear load is increased by adding the angle of attack of the bone, and the rear grip is improved. Pitching control is also made easier, which improves...
CHF23.90
Auf Lager  
+ −
Alu Main Pulley w/Drive Plate YZ-4
YOK-Z4-630M
CHF11.90
Auf Lager  
+ −
Yokomo Racing Performer Ultra Shock Oil 30wt
YOK-RP-085300A
Yokomo Racing Performer Ultra Shock Oil 30wt
CHF10.80
Auf Lager  
+ −
Grade up conversion 1 for YD-2
YOK-Y2-GC2A
entspricht: Y2-GC2
CHF95.00
Auf Lager  
+ −
Graphite Front Lower Arm YR-10L
YOK-YR-10L
CHF18.90
Auf Lager  
+ −
Front suspension arm for YZ-2T
YOK-Z2-008FTA
entspricht: Z2-008FT
CHF14.00
Auf Lager  
+ −
Aluminum main chassis for YRX-12
YOK-YX-02A
High quality, top range aluminum material has been selected for more rigid with 2.0mm thick main chassis and rear brace.
CHF94.50
Auf Lager  
+ −
Short Shock Set for MS1.0
YOK-MS-SSS
These short Aluminum Shocks are used in the MS1.0 standard. The Shock length is set to match the latest touring cars to lower the center of gravity as much as possible. The lower spring bearing is fitted with a bearing to release torsion of the coil spring during stroke and bring out neutral...
CHF94.10
Auf Lager  
+ −
Front“X30”shock set
YOK-S4-S1SA
entspricht: S4-S1S
CHF69.90
Auf Lager  
+ −
Alum. Short Shock Conversion Set for RS1.0
YOK-RS-SSC
New Short Shock Conversion Kit is now available to further improve the performance of the RookieSpeed RS1.0 to racing specs. This set of carbon shock towers and aluminum short shocks provide a sharp ride with minimal roll. The shock length has been shortened by more than 7mm to achieve an...
CHF94.10
Auf Lager  
+ −
Hard Main Chassis(CG) for BD8-2018
YOK-B8-00218H
2.5mm Carbon Graphite Hard Main Chassis has launched for the race at high grip surface condition.
CHF92.90
Auf Lager  
+ −
Ceramic Kugellager 5x10x4mm 2stk.
YOK-BB-1050CBA
entspricht: BB-1050CB
CHF13.90
Auf Lager  
+ −
Battery Plate (CG) YZ-4
YOK-Z4-118P
 
CHF18.50
Auf Lager  
+ −
Alu Adjust. Susp. Mount Set YD2 (Purple/Bevel edge
YOK-Y2-301APA
entspricht: Y2-301AP
CHF92.50
Auf Lager  
+ −
Alu Steering Bell Crank L/R YZ4-SF
YOK-S4-200AA
entspricht: S4-200A
CHF45.90
Auf Lager  
+ −
Alu Hight mount front shock Tower
YOK-Y2-017AFL
CHF45.90
Auf Lager  
+ −
Steering hub carrier / bushing YZ-2 DTM3.1/CAL3.1
YOK-Z2-413H3A
entspricht: Z2-413H3
CHF11.90
Nicht auf Lager
Upper Deck for B7-FMC
YOK-B7-00315
 
CHF22.90
Auf Lager  
+ −
Suspension Mount messing 44.2mm 12.4gr.
YOK-B7-3142FRB
Brass -1mm lower front suspension mount (Rear side 44.2mm·12.4g)
CHF22.90
Auf Lager  
+ −
HD f5.5mm Rod end ball (Screw 6mm long/4pcs) for Y
YOK-Z2-206-6A
entspricht: Z2-206-6
CHF6.90
Auf Lager  
+ −
Stabi Set (werden 2x für 1 Fahrzeug benötigt) YZ-4
YOK-Z4-412
CHF22.50
Auf Lager  
+ −
Front Susp. Mount messing (rear side 43.5mm 12.2gr)
YOK-B7-3135FRB
 
CHF22.50
Auf Lager  
+ −
Graphite front shock tower(Gull type)
YOK-Z2-017GA
 
CHF16.50
Auf Lager  
+ −
Main chassis (Hard alumite) for YZ-4SF2
YOK-S4-002S2A
entspricht: S4-002S2
CHF89.90
Auf Lager  
+ −
B-MAX2MR/RS Light weight body
YOK-B2-101MRL
 
AuswahlhilfeBuggy Massstab1:10 EinsatzOff-Road HerstellerYokomo MarkeDiverse Marken
CHF26.90
Auf Lager  
+ −
Light weight slide rack für YD-2Z
YOK-Y2-202SZA
A slide rack set that fits the YD-2Z chassis. Teams products with rails that have been reshaped and milled, and are effective in improving steering response and kinetic performance by reducing weight.
CHF89.90
Auf Lager  
+ −
Full counter solid axle set (Rear×1.8/Red)
YOK-IB-FCD18R
 
CHF44.90
Auf Lager  
+ −
Rotor Magnet D12.3xd5.00 M3 Motor
YOK-RP-058
 
CHF44.90
Auf Lager  
+ −
Suspension Mount Bushings YZ4-SF
YOK-S4-300BSA
entspricht: S4-300BS
CHF13.90
Auf Lager  
+ −
Graphite Bumper für YD-2
YOK-Y2-001GBA
entspricht: Y2-001GB
CHF44.90
Auf Lager  
+ −
High Grade Ball Differential Grease
YOK-CS-HDLA
 
CHF11.50
Auf Lager  
+ −
Messing Front Gewicht L/R 35gr. für BDFWD/BD10F
YOK-B10-BWF35
This front weight effectively increases the front traction of FWD cars. Made of black coated brass, weighing approx. 35g per side or approx. 70g on both sides, they can be screwed on for both BDFWD and BD10F, so there is no need to worry about them falling off while driving or in a...
CHF44.90
Auf Lager  
+ −
Shock Body
YOK-B9-S4S
CHF29.90
Auf Lager  
+ −
Slipper Pad
YOK-B2-670CA
entspricht: B2-670C
CHF8.90
Auf Lager  
+ −
BD-10 Cross Plate (Cross Plate Post
YOK-B10-118CPA
entspricht: B10-118CP
CHF29.90
Auf Lager  
+ −
3-pad Slipper Set für YZ-2
YOK-Z2-670C3
This is a set of additional parts to convert the YZ-2 series slipper system to a 3-pad system. The effect is smoother than that of the standard 2-pad system, and allows for more delicate adjustment. This improves driving stability, especially on high-grip surfaces, and reduces the...
CHF29.90
Auf Lager  
+ −
HD f5.5mm Rod end ball (Screw 8mm long/4pcs) for Y
YOK-Z2-206-8A
entspricht: Z2-206-8
CHF6.90
Auf Lager  
+ −
Verfügbarkeit
Verfügbar beim Lieferanten
Abmessungen
Auswahlhilfe
Material
Preis

CHF  –  CHF

  • ‎CHF1.5
  • ‎CHF999
Reifen/Rad-Typ
Servo-Typ
Verwendung
Massstab
Motor / Antrieb
Einsatz
Anspruch
Lackierung
Fertigungsgrad
Max. Geschwindigkeit
Marke
Betriebsspannung
Zurücksetzen (reset)