Français (CH)
ERSATZTEIL-FINDER

Yokomo

Trier par:
Recommandé
Montrer:
48
Steering hub carrier / bushing YZ-2 DTM3.1/CAL3.1
YOK-Z2-413H3A
entspricht: Z2-413H3
CHF 11.90
En stock
+ −
YD-2S Plus Conversion Kit
YOK-Y2-YD2SC
This new conversion is intended for the customer who would consider to upgrade for High Mount Motor spec like YD-2S Plus.
CHF 99.00
En stock
+ −
Alu Vari Kingpin Angle Steering block Set SDR01LTS
YOK-Y2-415SALL
CHF 99.00
En stock
+ −
Aluminum bulk head mount for YZ-2 series
YOK-Z2-018BMAA
entspricht: Z2-018BMA
CHF 56.50
En stock
+ −
Graphite Main Chassis MS1.0
YOK-MS-002
CHF 99.00
En stock
+ −
3gear Box Set für CA (Carpet Astroturf)
YOK-Z2-302C3
 
CHF 32.90
En stock
+ −
Spool Drive Cup BD9/BD10
YOK-B9-501MCAA
(Aluminum made)
CHF 24.90
En stock
+ −
Rear Anti Roll Bar "hard" set YZ-2 new arm compat.
YOK-Z2-412RH2
CHF 32.90
En stock
+ −
Aluminum frame 30mm cooling fan (Red)
YOK-D-CFRA
A cooling fan that uses a luxurious aluminum frame. With a 30mm size that is ideal for cooling the motor, having a lineup of three colors, silver, red, and purple, which would match with variations of the YD-2 series. The connector is a pin shaped that will be easy to connect with the power...
CHF 32.90
En stock
+ −
Gokuraku Offroad Wing (Narrow size)
YOK-ZS-GWBNA
entspricht: ZS-GWBN
CHF 9.90
En stock
+ −
Aluminum Rear Hub Carrier (3mm Pin) CAL3/DTM3
YOK-Z2-415RS2A
entspricht: Z2-415RS2
CHF 97.90
En stock
+ −
Universal shaft 66.5mm bone
YOK-Z2-010-65
 
CHF 32.50
En stock
+ −
Front Stabi Set YZ2 6stk.(New arm compatible/6 bar
YOK-Z2-412F3A
entspricht: Z2-412F3
CHF 25.90
En stock
+ −
30mm Fan Shroud SO3.0
YOK-SO-FSS30
This fan shroud is attached to the cooling fan of a 2WD off-road vehicle to increase the cooling effect of the motor. It will greatly contribute to maintaining motor performance and efficiency in the coming season of higher temperatures. A 30mm cooling fan is attached to the chassis via the...
CHF 13.90
En stock
+ −
Front One-Way Assy (for Right Side Belt/Red)
YOK-BR-640W
 
CHF 47.90
En stock
+ −
Front & Undertray diffuser set for YD-2 /4 series
YOK-Y2-001BDA
Greatly improve the front grip and turning performance of the chassis when entering a corner or snapping transitions. The response of the car to the steering operation becomes more of a direct feeling, and the control of the drift can be carried out as expected.
CHF 19.90
Full counter solid axle set (Rear×2.0/Blue)
YOK-IB-FCD20
 
CHF 47.90
En stock
+ −
MIP Pucks Aluminum diff ring hub for YZ-2 Stock ve
YOK-Z2-18842
CHF 47.90
En stock
+ −
H12 Front Wheel (White)
YOK-B2-821HWA
entspricht: B2-821HW
AuswahlhilfeBuggy MaterialKunststoff Reifen/Rad-TypFelgen Massstab1:10 EinsatzOff-Road
CHF 6.40
En stock
+ −
Hybrid Shock Tower for RD/SD Series
YOK-Y2-017AGBL
Newly released are the Hybrid Front Shock Tower (Blue), an optional part for the RD/SD series, and the standard aluminum shock tower for the SD3.0 Blue version. Both are designed for the same series and can be bolted on to the RD2.0 chassis and other chassis.
CHF 47.90
En stock
+ −
BD-10 Separate Rear Suspension Mount (Front (Brass)
YOK-B10-301SBA
entspricht: B10-301SB
CHF 31.90
En stock
+ −
Rear motor conversion kit for YD-2 series
YOK-Y2-RMCA
Introducing the ultimate option for increasing rear traction and speed! That is already known, Rear motor conversion kit which enable to mount on both YD-2E series and YD-2S series. (S series require to add some other parts) 1)Improving the rotational effect of the motor by reducing the...
CHF 47.90
En stock
+ −
SO1.0/2.0 High Traction Offset Rear Graphite
YOK-Z2-008R3GH
SO series rear lower suspension arm. By shortening the wheelbase by up to 7mm on the suspension arm side, The rear load is increased by adding the angle of attack of the bone, and the rear grip is improved. Pitching control is also made easier, which improves...
CHF 23.90
En stock
+ −
Grade up conversion 1 for YD-2
YOK-Y2-GC2A
entspricht: Y2-GC2
CHF 95.00
En stock
+ −
Aluminum main chassis for YRX-12
YOK-YX-02A
High quality, top range aluminum material has been selected for more rigid with 2.0mm thick main chassis and rear brace.
CHF 94.50
En stock
+ −
Ceramic Kugellager 5x10x4mm 2stk.
YOK-BB-1050CBA
entspricht: BB-1050CB
CHF 13.90
En stock
+ −
Rear short shock shaft (titanium coat) for YZ-2DTM
YOK-S4-S2MTA
A shock shaft that can be used on the rear of the YZ-2DTM3 / CAL3 and the front of the YZ-2T. The shaft diameter is F3.0mm, which is thinner than the standard F3.3mm, and it is possible to reduce friction and enhance the shock absorption effect. Since the shaft surface is coated with titanium,...
CHF 23.50
En stock
+ −
Hard Main Chassis(CG) for BD8-2018
YOK-B8-00218H
2.5mm Carbon Graphite Hard Main Chassis has launched for the race at high grip surface condition.
CHF 92.90
En stock
+ −
Steering hub carrier / bushing YZ-2 DTM3.1/CAL3.1
YOK-Z2-413G3A
Graphite molded steering hub carrier for YZ-2 DTM3.1 / CAL3.1. The kingpin position has been changed to the front side compared to the past, and the shape has been changed to attach the steering stopper. Uses graphite resin, which is harder than the standard, and improves steering response.
CHF 17.90
En stock
+ −
Battery Plate (CG) YZ-4
YOK-Z4-118P
 
CHF 18.50
En stock
+ −
Alu Adjust. Susp. Mount Set YD2 (Purple/Bevel edge
YOK-Y2-301APA
entspricht: Y2-301AP
CHF 92.50
En stock
+ −
Yokomo Pit Mat 100x60cm
YOK-YT-PM26A
Yokomo's pit mat is ideal for pit work on circuits. With a width of 100 cm and a depth of 60 cm, the surface has a smooth satin-like feel, and the Yokomo Racing Factory print logo is placed large to create a competitive image. The back side is made of rubber material to prevent slippage...
CHF 45.90
En stock
+ −
Alu Hight mount front shock Tower
YOK-Y2-017AFL
CHF 45.90
En stock
+ −
Graphite front shock tower for YZ-2DTM3/CAL3
YOK-Z2-017-3A
3mm Lowered
CHF 15.90
En stock
+ −
Aluminum Rear Hub Carrier L/R for SO Series
YOK-SO-415RA
CHF 45.90
En stock
+ −
Aluminium Front Shock Tower (Blue) RD/SD Series
YOK-Y2-017AFEBL
Newly released are the Hybrid Front Shock Tower (Blue), an optional part for the RD/SD series, and the standard aluminum shock tower for the SD3.0 Blue version. Both are designed for the same series and can be bolted on to the RD2.0 chassis and other chassis.
CHF 45.90
En stock
+ −
Front Steering Hub Carrier 8degrees YZ4-SF
YOK-S4-413-8A
entspricht: S4-413-8
CHF 9.90
En stock
+ −
Upper Deck for B7-FMC
YOK-B7-00315
 
CHF 22.90
En stock
+ −
Suspension Mount messing 44.2mm 12.4gr.
YOK-B7-3142FRB
Brass -1mm lower front suspension mount (Rear side 44.2mm·12.4g)
CHF 22.90
En stock
+ −
HD f5.5mm Rod end ball (Screw 8mm long/4pcs) for Y
YOK-Z2-206-8A
entspricht: Z2-206-8
CHF 6.90
En stock
+ −
Graphite Rear Shock Tower SO3.0
YOK-SO-018
CHF 22.90
En stock
+ −
Stabi Set (werden 2x für 1 Fahrzeug benötigt) YZ-4
YOK-Z4-412
CHF 22.50
En stock
+ −
Front suspension arm for YZ-2T
YOK-Z2-008FTA
entspricht: Z2-008FT
CHF 14.00
En stock
+ −
Front Susp. Mount messing (rear side 43.5mm 12.2gr)
YOK-B7-3135FRB
 
CHF 22.50
En stock
+ −
Main chassis (Hard alumite) for YZ-4SF2
YOK-S4-002S2A
entspricht: S4-002S2
CHF 89.90
En stock
+ −
Light weight slide rack für YD-2Z
YOK-Y2-202SZA
A slide rack set that fits the YD-2Z chassis. Teams products with rails that have been reshaped and milled, and are effective in improving steering response and kinetic performance by reducing weight.
CHF 89.90
En stock
+ −
V4 Steering Gyro Blue Version
YOK-DPP-302V4BL
This is the blue version of the V3 Gyro, which is used by a high percentage of top drivers. Four modes are provided for different levels of operation, allowing you to select the level of interference with which the gyro will operate. Endponts can also be set for easy adjustment to your...
CHF 59.90
En stock
+ −
Full counter solid axle set (Rear×1.8/Red)
YOK-IB-FCD18R
 
CHF 44.90
En stock
+ −
Verfügbarkeit
Verfügbar beim Lieferanten
Abmessungen
Auswahlhilfe
Material
Prix
CHF
–
CHF
  • CHF 1.5
  • CHF 849
Reifen/Rad-Typ
Servo-Typ
Verwendung
Massstab
Motor / Antrieb
Einsatz
Anspruch
Lackierung
Fertigungsgrad
Max. Geschwindigkeit
Marke
Betriebsspannung