Français (CH)
ERSATZTEIL-FINDER

Yokomo

Trier par:
Recommandé
Montrer:
48
Team Yokomo 2016 Jacket Grösse L
YOK-ZC-A23L
CHF 99.00
En stock  
+ −
Réduction 49%
Réduction 49%
YD-2S Plus Conversion Kit
YOK-Y2-YD2SC
This new conversion is intended for the customer who would consider to upgrade for High Mount Motor spec like YD-2S Plus.
CHF 99.00 CHF 195.00 -49%
En stock  
+ −
Front“X30”shock set
YOK-S4-S1SA
entspricht: S4-S1S
CHF 69.90
En stock  
+ −
Alu Vari Kingpin Angle Steering block Set SDR01LTS
YOK-Y2-415SALL
CHF 99.00
En stock  
+ −
Graphite Main Chassis MS1.0
YOK-MS-002
CHF 99.00
En stock  
+ −
Ceramic Kugellager 5x10x4mm 2stk.
YOK-BB-1050CBA
entspricht: BB-1050CB
CHF 13.90
En stock  
+ −
3gear Box Set für CA (Carpet Astroturf)
YOK-Z2-302C3
 
CHF 32.90
En stock  
+ −
Rear Anti Roll Bar "hard" set YZ-2 new arm compat.
YOK-Z2-412RH2
CHF 32.90
En stock  
+ −
H12 Front Wheel (White)
YOK-B2-821HWA
entspricht: B2-821HW
AuswahlhilfeBuggy MaterialKunststoff Reifen/Rad-TypFelgen Massstab1:10 EinsatzOff-Road
CHF 6.40
En stock  
+ −
Aluminum frame 30mm cooling fan (purple)
YOK-D-CFPA
A cooling fan that uses a luxurious aluminum frame. With a 30mm size that is ideal for cooling the motor, having a lineup of three colors, silver, red, and purple, which would match with variations of the YD-2 series. The connector is a pin shaped that will be easy to connect with the power...
CHF 32.90
En stock  
+ −
HD f5.5mm Rod end ball (Screw 6mm long/4pcs) for Y
YOK-Z2-206-6A
entspricht: Z2-206-6
CHF 6.90
En stock  
+ −
Aluminum frame 30mm cooling fan (Red)
YOK-D-CFRA
A cooling fan that uses a luxurious aluminum frame. With a 30mm size that is ideal for cooling the motor, having a lineup of three colors, silver, red, and purple, which would match with variations of the YD-2 series. The connector is a pin shaped that will be easy to connect with the power...
CHF 32.90
En stock  
+ −
Yokomo Tire Glue EX 20gr.
YOK-CS-SGEXA
entspricht: CS-SGEX
CHF 10.90
En stock  
+ −
Graphite molded L5/LD rear sus-Arm YZ-4SF2/YZ-2
YOK-S4-008R5GA
For YZ-4SF2/YZ-2CAL DTM3 and 3.1
CHF 15.90
En stock  
+ −
Aluminum Rear Hub Carrier (3mm Pin) CAL3/DTM3
YOK-Z2-415RS2A
entspricht: Z2-415RS2
CHF 97.90
En stock  
+ −
Universal shaft 66.5mm bone
YOK-Z2-010-65
 
CHF 32.50
En stock  
+ −
Graphite front shock tower(Gull type)
YOK-Z2-017GA
 
CHF 16.50
En stock  
+ −
30mm Fan Shroud SO3.0
YOK-SO-FSS30
This fan shroud is attached to the cooling fan of a 2WD off-road vehicle to increase the cooling effect of the motor. It will greatly contribute to maintaining motor performance and efficiency in the coming season of higher temperatures. A 30mm cooling fan is attached to the chassis via the...
CHF 13.90
En stock  
+ −
Front Wheel (White)
YOK-B4-821WA
entspricht: B4-821W
AuswahlhilfeBuggy MaterialKunststoff Reifen/Rad-TypFelgen Massstab1:10 EinsatzOff-Road
CHF 6.40
En stock  
+ −
Slipper Pad
YOK-B2-670CA
entspricht: B2-670C
CHF 8.90
En stock  
+ −
Front One-Way Assy (for Right Side Belt/Red)
YOK-BR-640W
 
CHF 47.90
En stock  
+ −
HD f5.5mm Rod end ball (Screw 8mm long/4pcs) for Y
YOK-Z2-206-8A
entspricht: Z2-206-8
CHF 6.90
En stock  
+ −
Full counter solid axle set (Rear×2.0/Blue)
YOK-IB-FCD20
 
CHF 47.90
En stock  
+ −
B-MAX4III Alu Steering Hub Carrier (15 degrees)
YOK-B4-413A15
 
CHF 47.90
En stock  
+ −
B-MAX2MR/RS Light weight body
YOK-B2-101MRL
 
AuswahlhilfeBuggy Massstab1:10 EinsatzOff-Road HerstellerYokomo MarkeDiverse Marken
CHF 26.90
En stock  
+ −
MIP Pucks Aluminum diff ring hub for YZ-2 Stock ve
YOK-Z2-18842
CHF 47.90
En stock  
+ −
Lexus RC GT3 Clear Body for Touring Car
YOK-SP-LFGT3B
This real scale body fits just right for 190mm wide touring cars, and is a scale-down version of the LEXUS RCF GT3, complete with wing and decals,all officially approved by Toyota. The massive form and large rear wing provide a highly stable driving feel. It is also compatible with the...
Auswahlhilfe190mm Touring MaterialLexan Massstab1:10 EinsatzOn-Road Drift, On-Road Lackierungunlackiert
CHF 47.90
En stock  
+ −
Suspension Mount Bushings YZ4-SF
YOK-S4-300BSA
entspricht: S4-300BS
CHF 13.90
En stock  
+ −
Nouveau
Hybrid Shock Tower for RD/SD Series
YOK-Y2-017AGBL
Newly released are the Hybrid Front Shock Tower (Blue), an optional part for the RD/SD series, and the standard aluminum shock tower for the SD3.0 Blue version. Both are designed for the same series and can be bolted on to the RD2.0 chassis and other chassis.
CHF 47.90
En stock  
+ −
BD-10 Separate Rear Suspension Mount (Front (Brass)
YOK-B10-301SBA
entspricht: B10-301SB
CHF 31.90
En stock  
+ −
Shock End Plastic Parts (S/M/L size) YZ-2DTM/YZ-4
YOK-Z2-S6MA
 
CHF 7.90
En stock  
+ −
SO1.0/2.0 High Traction Offset Rear Graphite
YOK-Z2-008R3GH
SO series rear lower suspension arm. By shortening the wheelbase by up to 7mm on the suspension arm side, The rear load is increased by adding the angle of attack of the bone, and the rear grip is improved. Pitching control is also made easier, which improves...
CHF 23.90
En stock  
+ −
Magnet Front Body Mount Purple
YOK-ZS-016MGFP
We now offer color variations of the magnetic body mounts that drift car users love to use. Previously available only in black anodized aluminum, three new colors are now available: blue, purple, and red to match your machine color. Both the front and rear mounts are attached to the shock towers,...
CHF 23.90
En stock  
+ −
High Grade Ball Differential Grease
YOK-CS-HDLA
entspricht: CS-HDL
CHF 11.50
En stock  
+ −
Alu Main Pulley w/Drive Plate YZ-4
YOK-Z4-630M
CHF 11.90
En stock  
+ −
Grade up conversion 1 for YD-2
YOK-Y2-GC2A
entspricht: Y2-GC2
CHF 95.00
En stock  
+ −
Spool Drive Cup BD9/BD10
YOK-B9-501MCAA
(Aluminum made)
CHF 24.90
En stock  
+ −
Graphite Front Lower Arm YR-10L
YOK-YR-10L
CHF 18.90
En stock  
+ −
Aluminum main chassis for YRX-12
YOK-YX-02A
High quality, top range aluminum material has been selected for more rigid with 2.0mm thick main chassis and rear brace.
CHF 94.50
En stock  
+ −
Rear hard stabilizer set for YZ-2/4
YOK-Z2-412RH
 
CHF 29.90
En stock  
+ −
Short Shock Set for MS1.0
YOK-MS-SSS
These short Aluminum Shocks are used in the MS1.0 standard. The Shock length is set to match the latest touring cars to lower the center of gravity as much as possible. The lower spring bearing is fitted with a bearing to release torsion of the coil spring during stroke and bring out neutral...
CHF 94.10
En stock  
+ −
Hard Main Chassis(CG) for BD8-2018
YOK-B8-00218H
2.5mm Carbon Graphite Hard Main Chassis has launched for the race at high grip surface condition.
CHF 92.90
En stock  
+ −
Front Stabi Set YZ2 6stk.(New arm compatible/6 bar
YOK-Z2-412F3A
entspricht: Z2-412F3
CHF 25.90
En stock  
+ −
Battery Plate (CG) YZ-4
YOK-Z4-118P
 
CHF 18.50
En stock  
+ −
Alu Adjust. Susp. Mount Set YD2 (Purple/Bevel edge
YOK-Y2-301APA
entspricht: Y2-301AP
CHF 92.50
En stock  
+ −
Alu Hight mount front shock Tower
YOK-Y2-017AFL
CHF 45.90
En stock  
+ −
Aluminum Rear Hub Carrier L/R for SO Series
YOK-SO-415RA
CHF 45.90
En stock  
+ −
Aluminum Wing Stay (Black)
YOK-D-057MA
entspricht: D-057M
CHF 12.90
En stock  
+ −
Verfügbarkeit
Verfügbar beim Lieferanten
Abmessungen
Auswahlhilfe
Material
Prix
CHF
–
CHF
  • CHF 1.5
  • CHF 949
Reifen/Rad-Typ
Servo-Typ
Verwendung
Massstab
Motor / Antrieb
Einsatz
Anspruch
Lackierung
Fertigungsgrad
Max. Geschwindigkeit
Marke
Betriebsspannung
Effacer