Deutsch (CH)
ERSATZTEIL-FINDER

Yokomo

Ordnen nach:
Empfohlen
Zeigen:
48
Full counter solid axle set (Rear×1.8/Red)
YOK-IB-FCD18R
 
CHF 44.90
Auf Lager
+ −
Aluminum top shaft for YZ-2 Direct spur gear
YOK-Z2-303TADA
entspricht: Z2-303TAD
CHF 18.90
Auf Lager
+ −
Rotor Magnet D12.3xd5.00 M3 Motor
YOK-RP-058
 
CHF 44.90
Auf Lager
+ −
Messing Front Gewicht L/R 35gr. für BDFWD/BD10F
YOK-B10-BWF35
This front weight effectively increases the front traction of FWD cars. Made of black coated brass, weighing approx. 35g per side or approx. 70g on both sides, they can be screwed on for both BDFWD and BD10F, so there is no need to worry about them falling off while driving or in a...
CHF 44.90
Auf Lager
+ −
Hard coat pivot ball for BD7 shock cap/end (4pcs)
YOK-B7-S8HA
entspricht: B7-S8H
CHF 12.95
Auf Lager
+ −
Shock Body
YOK-B9-S4S
CHF 29.90
Auf Lager
+ −
BD-10 Cross Plate (Cross Plate Post
YOK-B10-118CPA
entspricht: B10-118CP
CHF 29.90
Auf Lager
+ −
High Grade Ball Differential Grease
YOK-CS-HDLA
 
CHF 11.50
Auf Lager
+ −
Aluminum Heat Sink Motor Plate RS2.0
YOK-RS-302HM
This is an optional part for RS2.0, aluminum motor plate. It is shaped like a heat sink and improves the cooling effect of the motor. It suppresses heat leakage of the motor during driving and improves power efficiency. Effective when the temperature rises or when running outdoors during the day.
CHF 29.90
Auf Lager
+ −
Graphite Front Sus_arm L/R for MO Series
YOK-MO-008FG
CHF 14.90
Auf Lager
+ −
Aluminum Wing Stay (Black)
YOK-D-057MA
entspricht: D-057M
CHF 12.90
Auf Lager
+ −
Aluminum Main Drive Pulley (21T) für MS2.1
YOK-MS-630-21
CHF 43.90
Auf Lager
+ −
Shock End Plastic Parts (S/M/L size) YZ-2DTM/YZ-4
YOK-Z2-S6MA
 
CHF 7.90
Auf Lager
+ −
Alu/Steel Chassis Screw Set (120deg/31pcs) MS2.1
YOK-MS-SSA20-1
CHF 43.90
Auf Lager
+ −
Rear Shock Tower 2016
YOK-B7-01816
 
CHF 21.90
Auf Lager
+ −
Aluminum frame 30mm Cooling fan (Silver)
YOK-D-CFSA
A cooling fan that uses a luxurious aluminum frame. With a 30mm size that is ideal for cooling the motor, having a lineup of three colors, silver, red, and purple, which would match with variations of the YD-2 series. The connector is a pin shaped that will be easy to connect with the power...
CHF 33.90
Auf Lager
+ −
Suspension Mount messing 44.9mm 13.3gr.
YOK-B7-3149BB
Brass -1mm lower suspension mount (44.9mm·13.3g)
CHF 21.90
Auf Lager
+ −
Center Balance Weight
YOK-B9-BW30A
30g
CHF 21.90
Auf Lager
+ −
B-MAX2MR/RS Light weight body
YOK-B2-101MRL
 
AuswahlhilfeBuggy Massstab1:10 EinsatzOff-Road HerstellerYokomo MarkeDiverse Marken
CHF 26.90
Auf Lager
+ −
BD-919/BD10/BD10LC Axle/Spacer for AXON Super Hub
YOK-B10-WHAS1A
BD-919/BD10/BD10LC Axle/Spacer for AXON Super Hub Axle
CHF 21.90
Auf Lager
+ −
Rear Roll Damper Mount (Left) YR-22L
YOK-YR-22L
 
CHF 17.50
Auf Lager
+ −
Suspension Mount Bushings YZ4-SF
YOK-S4-300BSA
entspricht: S4-300BS
CHF 13.90
Auf Lager
+ −
Rear Lower Suspension Arm 39.5mm Extra Hard BD-8
YOK-BD-008RE1
This is intended for increasing the steering response in order to increase the cornering speed at high grip surface condition.
CHF 12.50
Auf Lager
+ −
Blank piston for SO/MO f13mm Shock 2.5mm thick
YOK-S4-SB1325
Blank pistons for off-road f13mm shocks, available in three different thicknesses from 1.5 to 2.5 mm, with thinner pistons operating softer and thicker ones tasting more hip. Piston holes can be drilled freely with a pin vise, etc. but guide marks are provided so that 2 to 6 holes can be...
CHF 7.90
Auf Lager
+ −
Rookie Speed RS2.0 Kit Aluminium Short Shock
YOK-RSR-020-1
Eine Sonderausführung des Rookie Speed RS2.0 – beliebt wegen seines einfachen Handlings und seines günstigen Preises – ist nun erhältlich: leicht optimiert und ausgestattet mit Graphit-Stoßdämpferhaltern vorne und hinten sowie einem Umbau auf kurze Stoßdämpfer! Im Vergleich zu den...
CHF 199.00
Aluminum steering belcrunk
YOK-Z2-201BA
 
CHF 28.90
Auf Lager
+ −
YD-4 Solid/One Way FCD Gear Set (Front x 0.59)
YOK-Y4-64359
 
CHF 28.90
Auf Lager
+ −
3×6×0.5mm Alu Shim (8pcs·Black)
YOK-ZC-A3605BA
entspricht: ZC-A3605B
CHF 5.90
Auf Lager
+ −
YOKOMO Parts Case 255X190X40mm
YOK-YC-15
A new lineup of parts cases with the Yokomo logo has been added to the series. The three new cases are suitable for storing relatively small parts, and feature a large number of movable dividers that can be positioned in a variety of ways. The body is made of polypropylene, which is...
CHF 21.50
Auf Lager
+ −
Graphite Rear Axle for World conversion
YOK-R12-24SN
 
CHF 42.90
Auf Lager
+ −
Front/Rear wing mount for YZ-2DTM3/CAL3
YOK-Z2-001W3A
entspricht: Z2-001W3
CHF 10.90
Auf Lager
+ −
Titanium turn buckle set for YZ-2DTM3
YOK-Z2-TBSD3A
with Wrench
CHF 42.90
Auf Lager
+ −
Rear ESC Mount (Blue) for RD/SD Series
YOK-Y2-REM-BL
Diese hintere ESC-Halterung passt perfekt für die RD/SD-Serie. Die Halterungen sind aus blauem Aluminium gefertigt und sorgen in Kombination mit der Kohlefaserplatte für ein besonders hochwertiges Finish.
CHF 42.90
Auf Lager
+ −
Steering Block L/R YZ-4
YOK-Z4-415SA
 
CHF 8.90
Auf Lager
+ −
13 Shock Cap (Plastic) for SO/MO2.0
YOK-S4-S813R
A resin cap for F13mm big bore shocks. Drain screw included. Contains 2 pieces.
CHF 8.50
Auf Lager
+ −
Aluminum center mount for BD10F
YOK-B10-302CMA
entspricht: B10-302CM
CHF 84.90
Auf Lager
+ −
Rear hub carrier/Bushing (F3 pin/Hard type) DTM3/C
YOK-Z2-415RDCA
Hard type
CHF 11.50
Auf Lager
+ −
Alum.Main Chassis for MO Series
YOK-MO-002
CHF 84.90
Auf Lager
+ −
Aluminium Suspension Mount Set für RS1.0/RS2.0
YOK-RS-301AS
This aluminum suspension mount is commonly used for the RS series. The rear mount is basically designed to have the same width as the standard one, but the rear rear suspension toe angle can be changed by interchanging the two types of bushings. The kit standard (3 degree) bushing is the center...
CHF 84.90
Auf Lager
+ −
DP48/84T SpurGear of Dual Pad forB-YZ4S
YOK-S4-SG84DA
entspricht: S4-SG84D
CHF 6.50
Auf Lager
+ −
Aluminum Separate Suspension Mount (44.2mm)
YOK-B7-30142
 
CHF 16.90
Auf Lager
+ −
“X30”shock X ring(3.0mm)
YOK-S4-S3XA
entspricht: S4-S3X
CHF 6.50
Auf Lager
+ −
Magnet Rear Body Mount Purple
YOK-ZS-016MGRP
We now offer color variations of the magnetic body mounts that drift car users love to use. Previously available only in black anodized aluminum, three new colors are now available: blue, purple, and red to match your machine color. Both the front and rear mounts are attached to the shock towers,...
CHF 23.90
Brass Rear H Arm Weight A (10g)
YOK-Y2-008RW10
This optional part for the RD2.0/SD2.0 combines an aluminum rear H-arm with a brass weight to systematically increase rear traction. By mounting the weight on the rigid aluminum H-arm, the unsprung weight, which is directly loaded on the rear tires, is increased, effectively increasing tire...
CHF 41.90
Auf Lager
+ −
Turnbucke Upper Arm Set for MS1.0
YOK-MS-008T
This is a turnbuckle adjustable upper arm set that makes the most of the MS1.0's greatest feature, the linkage-type upper A-arm. This single set of front and rear upper arms allows for camber changes as well as fine caster angle adjustments.
CHF 41.90
Auf Lager
+ −
Steering Block BD9/BD10
YOK-B9-415SA
entspricht: B9-415S
CHF 11.50
Auf Lager
+ −
YD-2/BD8 Brass Sus holder A (39.5~42.7mm)
YOK-TS-2149
Please be announced the new items made by brass for BD-8 and YD-2 series.
CHF 27.90
Auf Lager
+ −
Kohlefaser Bodypostmount Hinten 3.0mm MS2.0
YOK-MS-016-2
CHF 27.90
Auf Lager
+ −
Servo Breite
Verfügbarkeit
Verfügbar beim Lieferanten
Abmessungen
Auswahlhilfe
Material
Preis
CHF
–
CHF
  • CHF 1.5
  • CHF 999.9
Reifen/Rad-Typ
Servo-Typ
Verwendung
Massstab
Motor / Antrieb
Einsatz
Anspruch
Lackierung
Fertigungsgrad
Max. Geschwindigkeit
Marke
Betriebsspannung