Français (CH)
ERSATZTEIL-FINDER

Yokomo

Trier par:
Recommandé
Montrer:
48
Full counter solid axle set (Rear×1.8/Red)
YOK-IB-FCD18R
 
CHF 44.90
En stock
+ −
Rear hard stabilizer set for YZ-2/4
YOK-Z2-412RH
 
CHF 29.90
En stock
+ −
Rotor Magnet D12.3xd5.00 M3 Motor
YOK-RP-058
 
CHF 44.90
En stock
+ −
Messing Front Gewicht L/R 35gr. für BDFWD/BD10F
YOK-B10-BWF35
This front weight effectively increases the front traction of FWD cars. Made of black coated brass, weighing approx. 35g per side or approx. 70g on both sides, they can be screwed on for both BDFWD and BD10F, so there is no need to worry about them falling off while driving or in a...
CHF 44.90
En stock
+ −
Aluminum top shaft for YZ-2 Direct spur gear
YOK-Z2-303TADA
entspricht: Z2-303TAD
CHF 18.90
Shock Body
YOK-B9-S4S
CHF 29.90
En stock
+ −
BD-10 Cross Plate (Cross Plate Post
YOK-B10-118CPA
entspricht: B10-118CP
CHF 29.90
En stock
+ −
Hard coat pivot ball for BD7 shock cap/end (4pcs)
YOK-B7-S8HA
entspricht: B7-S8H
CHF 12.95
En stock
+ −
Aluminum Heat Sink Motor Plate RS2.0
YOK-RS-302HM
This is an optional part for RS2.0, aluminum motor plate. It is shaped like a heat sink and improves the cooling effect of the motor. It suppresses heat leakage of the motor during driving and improves power efficiency. Effective when the temperature rises or when running outdoors during the day.
CHF 29.90
En stock
+ −
Graphite Front Sus_arm L/R for MO Series
YOK-MO-008FG
CHF 14.90
En stock
+ −
High Grade Ball Differential Grease
YOK-CS-HDLA
entspricht: CS-HDL
CHF 11.50
En stock
+ −
Nouveau
Aluminum Main Drive Pulley (21T) für MS2.1
YOK-MS-630-21
CHF 43.90
En stock
+ −
Aluminum Wing Stay (Black)
YOK-D-057MA
entspricht: D-057M
CHF 12.90
En stock
+ −
Rear Shock Tower 2016
YOK-B7-01816
 
CHF 21.90
En stock
+ −
Suspension Mount messing 44.9mm 13.3gr.
YOK-B7-3149BB
Brass -1mm lower suspension mount (44.9mm·13.3g)
CHF 21.90
En stock
+ −
Shock End Plastic Parts (S/M/L size) YZ-2DTM/YZ-4
YOK-Z2-S6MA
 
CHF 7.90
En stock
+ −
Center Balance Weight
YOK-B9-BW30A
30g
CHF 21.90
En stock
+ −
BD-919/BD10/BD10LC Axle/Spacer for AXON Super Hub
YOK-B10-WHAS1A
BD-919/BD10/BD10LC Axle/Spacer for AXON Super Hub Axle
CHF 21.90
En stock
+ −
B-MAX2MR/RS Light weight body
YOK-B2-101MRL
 
AuswahlhilfeBuggy Massstab1:10 EinsatzOff-Road HerstellerYokomo MarkeDiverse Marken
CHF 26.90
En stock
+ −
Rear Roll Damper Mount (Left) YR-22L
YOK-YR-22L
 
CHF 17.50
En stock
+ −
Rear Lower Suspension Arm 39.5mm Extra Hard BD-8
YOK-BD-008RE1
This is intended for increasing the steering response in order to increase the cornering speed at high grip surface condition.
CHF 12.50
En stock
+ −
Suspension Mount Bushings YZ4-SF
YOK-S4-300BSA
entspricht: S4-300BS
CHF 13.90
En stock
+ −
Blank piston for SO/MO f13mm Shock 2.5mm thick
YOK-S4-SB1325
Blank pistons for off-road f13mm shocks, available in three different thicknesses from 1.5 to 2.5 mm, with thinner pistons operating softer and thicker ones tasting more hip. Piston holes can be drilled freely with a pin vise, etc. but guide marks are provided so that 2 to 6 holes can be...
CHF 7.90
En stock
+ −
Aluminum steering belcrunk
YOK-Z2-201BA
 
CHF 28.90
En stock
+ −
Rookie Speed RS2.0 Kit Aluminium Short Shock
YOK-RSR-020-1
Eine Sonderausführung des Rookie Speed RS2.0 – beliebt wegen seines einfachen Handlings und seines günstigen Preises – ist nun erhältlich: leicht optimiert und ausgestattet mit Graphit-Stoßdämpferhaltern vorne und hinten sowie einem Umbau auf kurze Stoßdämpfer! Im Vergleich zu den...
CHF 199.00
YD-4 Solid/One Way FCD Gear Set (Front x 0.59)
YOK-Y4-64359
 
CHF 28.90
En stock
+ −
YOKOMO Parts Case 255X190X40mm
YOK-YC-15
A new lineup of parts cases with the Yokomo logo has been added to the series. The three new cases are suitable for storing relatively small parts, and feature a large number of movable dividers that can be positioned in a variety of ways. The body is made of polypropylene, which is...
CHF 21.50
En stock
+ −
3×6×0.5mm Alu Shim (8pcs·Black)
YOK-ZC-A3605BA
entspricht: ZC-A3605B
CHF 5.90
En stock
+ −
Graphite Rear Axle for World conversion
YOK-R12-24SN
 
CHF 42.90
En stock
+ −
Titanium turn buckle set for YZ-2DTM3
YOK-Z2-TBSD3A
with Wrench
CHF 42.90
En stock
+ −
Front/Rear wing mount for YZ-2DTM3/CAL3
YOK-Z2-001W3A
entspricht: Z2-001W3
CHF 10.90
En stock
+ −
Rear ESC mount for YD-2 series
YOK-Y2-REM-RA
A ESC mount set that can change the weight balance of the chassis by mounting the ESC on the rear overhang and greatly enhance the rear traction. Especially effective on roads with low grip, the load applied to the rear tires at the corner exit is overwhelming! It is possible to get a...
CHF 42.90
En stock
+ −
Rear ESC Mount (Blue) for RD/SD Series
YOK-Y2-REM-BL
Diese hintere ESC-Halterung passt perfekt für die RD/SD-Serie. Die Halterungen sind aus blauem Aluminium gefertigt und sorgen in Kombination mit der Kohlefaserplatte für ein besonders hochwertiges Finish.
CHF 42.90
En stock
+ −
Steering Block L/R YZ-4
YOK-Z4-415SA
 
CHF 8.90
En stock
+ −
13 Shock Cap (Plastic) for SO/MO2.0
YOK-S4-S813R
A resin cap for F13mm big bore shocks. Drain screw included. Contains 2 pieces.
CHF 8.50
En stock
+ −
Aluminum center mount for BD10F
YOK-B10-302CMA
entspricht: B10-302CM
CHF 84.90
En stock
+ −
Rear hub carrier/Bushing (F3 pin/Hard type) DTM3/C
YOK-Z2-415RDCA
Hard type
CHF 11.50
En stock
+ −
Alum.Main Chassis for MO Series
YOK-MO-002
CHF 84.90
En stock
+ −
Aluminium Suspension Mount Set für RS1.0/RS2.0
YOK-RS-301AS
This aluminum suspension mount is commonly used for the RS series. The rear mount is basically designed to have the same width as the standard one, but the rear rear suspension toe angle can be changed by interchanging the two types of bushings. The kit standard (3 degree) bushing is the center...
CHF 84.90
En stock
+ −
Komplettrad Drift DRC 4stk.
YOK-ZR-DRCW6A
It is a solid type competition resin drift tire DRC. This PE compound is ideal for carpets and P-tile road surfaces, and the tire thickness, tread shape, sidewall shape, etc. have been newly designed to match the latest drift style. It can be attached to a general 1/10 size drift wheel as it is,...
CHF 34.90
Aluminum Separate Suspension Mount (44.2mm)
YOK-B7-30142
 
CHF 16.90
En stock
+ −
Brass Rear H Arm Weight A (10g)
YOK-Y2-008RW10
This optional part for the RD2.0/SD2.0 combines an aluminum rear H-arm with a brass weight to systematically increase rear traction. By mounting the weight on the rigid aluminum H-arm, the unsprung weight, which is directly loaded on the rear tires, is increased, effectively increasing tire...
CHF 41.90
En stock
+ −
DP48/84T SpurGear of Dual Pad forB-YZ4S
YOK-S4-SG84DA
entspricht: S4-SG84D
CHF 6.50
En stock
+ −
Turnbucke Upper Arm Set for MS1.0
YOK-MS-008T
This is a turnbuckle adjustable upper arm set that makes the most of the MS1.0's greatest feature, the linkage-type upper A-arm. This single set of front and rear upper arms allows for camber changes as well as fine caster angle adjustments.
CHF 41.90
En stock
+ −
YD-2/BD8 Brass Sus holder A (39.5~42.7mm)
YOK-TS-2149
Please be announced the new items made by brass for BD-8 and YD-2 series. This new suspension holder has released under Team Suzuki brand. It is the same shape but made by brass for gaining more weight to be functioned as vehicle weight balance items. By replacing with the standard...
CHF 27.90
En stock
+ −
Magnet Rear Body Mount Purple
YOK-ZS-016MGRP
We now offer color variations of the magnetic body mounts that drift car users love to use. Previously available only in black anodized aluminum, three new colors are now available: blue, purple, and red to match your machine color. Both the front and rear mounts are attached to the shock towers,...
CHF 23.90
Kohlefaser Bodypostmount Hinten 3.0mm MS2.0
YOK-MS-016-2
CHF 27.90
En stock
+ −
Graphite Separate Battery Holder
YOK-B12-118S
Lightweight graphite battery holder. Split front and rear sections allow the chassis to remain flexible for torsion. Spacers are included to adjust to the battery thickness.
CHF 20.90
En stock
+ −
Verfügbarkeit
Verfügbar beim Lieferanten
Abmessungen
Auswahlhilfe
Material
Prix
CHF
–
CHF
  • CHF 1.5
  • CHF 849
Reifen/Rad-Typ
Servo-Typ
Verwendung
Massstab
Motor / Antrieb
Einsatz
Anspruch
Lackierung
Fertigungsgrad
Max. Geschwindigkeit
Marke
Betriebsspannung