ERSATZTEIL-FINDER

Yokomo

Trier par:
Recommandé
48
Stabi Set (werden 2x für 1 Fahrzeug benötigt) YZ-4
YOK-Z4-412
CHF22.50
En stock  
+ −
Front Susp. Mount messing (rear side 43.5mm 12.2gr)
YOK-B7-3135FRB
 
CHF22.50
En stock  
+ −
Front Stabi Set YZ2 6stk.(New arm compatible/6 bar
YOK-Z2-412F3A
entspricht: Z2-412F3
CHF25.90
En stock  
+ −
Main chassis (Hard alumite) for YZ-4SF2
YOK-S4-002S2A
entspricht: S4-002S2
CHF89.90
En stock  
+ −
Aluminum Wing Stay (Black)
YOK-D-057MA
entspricht: D-057M
CHF12.90
En stock  
+ −
Light weight slide rack für YD-2Z
YOK-Y2-202SZA
A slide rack set that fits the YD-2Z chassis. Teams products with rails that have been reshaped and milled, and are effective in improving steering response and kinetic performance by reducing weight.
CHF89.90
En stock  
+ −
SLF Aluminum Big Bore shock set (Red) for YD-2
YOK-Y2SBBSR
Super low friction aluminum big bore shock set for YD-2. The cylinder diameter is wider than the conventional shock, and the shock length is also newly designed for drifting. The maximum capacity for on-road shocks enhances the sense of stability. The cylinder is also treated with Kashima Coat...
CHF89.90
En stock  
+ −
Full counter solid axle set (Rear×1.8/Red)
YOK-IB-FCD18R
 
CHF44.90
En stock  
+ −
H12 Front Wheel (White)
YOK-B2-821HWA
entspricht: B2-821HW
CHF6.40
En stock  
+ −
Rotor Magnet D12.3xd5.00 M3 Motor
YOK-RP-058
 
CHF44.90
En stock  
+ −
Graphite Bumper für YD-2
YOK-Y2-001GBA
entspricht: Y2-001GB
CHF44.90
En stock  
+ −
3×6×0.5mm Alu Shim (8pcs·Black)
YOK-ZC-A3605BA
entspricht: ZC-A3605B
CHF5.90
En stock  
+ −
Messing Front Gewicht L/R 35gr. für BDFWD/BD10F
YOK-B10-BWF35
This front weight effectively increases the front traction of FWD cars. Made of black coated brass, weighing approx. 35g per side or approx. 70g on both sides, they can be screwed on for both BDFWD and BD10F, so there is no need to worry about them falling off while driving or in a...
CHF44.90
En stock  
+ −
Shock Body
YOK-B9-S4S
CHF29.90
En stock  
+ −
Body Mount Set BD9/BD10
YOK-B9-016A
entspricht: B9-016
CHF11.90
En stock  
+ −
BD-10 Cross Plate (Cross Plate Post
YOK-B10-118CPA
entspricht: B10-118CP
CHF29.90
En stock  
+ −
3-pad Slipper Set für YZ-2
YOK-Z2-670C3
This is a set of additional parts to convert the YZ-2 series slipper system to a 3-pad system. The effect is smoother than that of the standard 2-pad system, and allows for more delicate adjustment. This improves driving stability, especially on high-grip surfaces, and reduces the...
CHF29.90
En stock  
+ −
DP48/84T SpurGear of Dual Pad forB-YZ4S
YOK-S4-SG84DA
entspricht: S4-SG84D
CHF6.50
En stock  
+ −
Graphite Front Sus_arm L/R for MO Series
YOK-MO-008FG
CHF14.90
En stock  
+ −
Aluminum top shaft for YZ-2DTM3/CAL3
YOK-Z2-303TA3A
For Z2-670S
CHF17.90
En stock  
+ −
LCG short Li-po enabled Graphite Battery Holder
YOK-B10-118G1A
entspricht: B10-118G1
CHF87.90
En stock  
+ −
Rear Shock Tower 2016
YOK-B7-01816
 
CHF21.90
En stock  
+ −
Suspension Mount messing 44.9mm 13.3gr.
YOK-B7-3149BB
Brass -1mm lower suspension mount (44.9mm·13.3g)
CHF21.90
En stock  
+ −
Spool Drive Cup BD9/BD10
YOK-B9-501MCAA
(Aluminum made)
CHF24.90
En stock  
+ −
Center Balance Weight
YOK-B9-BW30A
30g
CHF21.90
En stock  
+ −
BD-919/BD10/BD10LC Axle/Spacer for AXON Super Hub
YOK-B10-WHAS1A
BD-919/BD10/BD10LC Axle/Spacer for AXON Super Hub Axle
CHF21.90
En stock  
+ −
Aluminum frame 30mm Cooling fan (Silver)
YOK-D-CFSA
A cooling fan that uses a luxurious aluminum frame. With a 30mm size that is ideal for cooling the motor, having a lineup of three colors, silver, red, and purple, which would match with variations of the YD-2 series. The connector is a pin shaped that will be easy to connect with the power...
CHF33.90
En stock  
+ −
Rear Roll Damper Mount (Left) YR-22L
YOK-YR-22L
 
CHF17.50
En stock  
+ −
Front Steering Hub Carrier 8degrees YZ4-SF
YOK-S4-413-8A
entspricht: S4-413-8
CHF9.90
En stock  
+ −
Rear Lower Suspension Arm 39.5mm Extra Hard BD-8
YOK-BD-008RE1
This is intended for increasing the steering response in order to increase the cornering speed at high grip surface condition.
CHF12.50
En stock  
+ −
Aluminum steering belcrunk
YOK-Z2-201BA
 
CHF28.90
En stock  
+ −
Titanium coat shock shaft YD-4
YOK-Y4-S5TA
entspricht: Y4-S5T
CHF21.50
En stock  
+ −
YD-4 Solid/One Way FCD Gear Set (Front x 0.59)
YOK-Y4-64359
 
CHF28.90
En stock  
+ −
Aluminum Servo Mount SO3.0
YOK-SO-203
CHF28.90
En stock  
+ −
Graphite Rear Axle for World conversion
YOK-R12-24SN
 
CHF42.90
En stock  
+ −
Steering block L/R
YOK-Z2-415SH3A
Hard type
CHF7.90
En stock  
+ −
Titanium turn buckle set for YZ-2DTM3
YOK-Z2-TBSD3A
with Wrench
CHF42.90
En stock  
+ −
Rear ESC mount for YD-2 series
YOK-Y2-REM-RA
A ESC mount set that can change the weight balance of the chassis by mounting the ESC on the rear overhang and greatly enhance the rear traction. Especially effective on roads with low grip, the load applied to the rear tires at the corner exit is overwhelming! It is possible to get a...
CHF42.90
En stock  
+ −
10×6mm Bearing
YOK-BB-106-4A
entspricht: BB-106-4
CHF13.90
En stock  
+ −
Aluminum center mount for BD10F
YOK-B10-302CMA
entspricht: B10-302CM
CHF84.90
En stock  
+ −
Alum.Main Chassis for MO Series
YOK-MO-002
CHF84.90
En stock  
+ −
RP Driftfelge High Tract.(6mm Offset) weiss 1paar
YOK-RP-6313W6A
In reflect with the demand for more road trace feels at low traction track surface, Yokomo will release new high traction wheels under Racing Performer brand. T he new high traction wheels are all 6mm offsets and with 3 selectable colors, Titanium, Yellow and White. Besides, the edge of the...
Auswahlhilfe190mm Touring MaterialDrift Reifen/Rad-TypFelgen Massstab1:10 EinsatzOn-Road Drift
CHF9.50
En stock  
+ −
Aluminum Separate Suspension Mount (44.2mm)
YOK-B7-30142
 
CHF16.90
En stock  
+ −
Brass Rear H Arm Weight A (10g)
YOK-Y2-008RW10
This optional part for the RD2.0/SD2.0 combines an aluminum rear H-arm with a brass weight to systematically increase rear traction. By mounting the weight on the rigid aluminum H-arm, the unsprung weight, which is directly loaded on the rear tires, is increased, effectively increasing tire...
CHF41.90
En stock  
+ −
DX1R series Brushless motor (10.5T) rot
YOK-RPM-DX105RR
The DX1 Type-R motor, one of the most popular brushless motors for drifting, is now available in a new color anodized version! The two color variations are of course red anodized and purple anodized, which best match the YD-2 series, and of course, match the chassis perfectly. This is a...
CHF119.90
Rupture de stock
Turnbucke Upper Arm Set for MS1.0
YOK-MS-008T
This is a turnbuckle adjustable upper arm set that makes the most of the MS1.0's greatest feature, the linkage-type upper A-arm. This single set of front and rear upper arms allows for camber changes as well as fine caster angle adjustments.
CHF41.90
En stock  
+ −
YD-2/BD8 Brass Sus holder A (39.5~42.7mm)
YOK-TS-2149
Please be announced the new items made by brass for BD-8 and YD-2 series. This new suspension holder has released under Team Suzuki brand. It is the same shape but made by brass for gaining more weight to be functioned as vehicle weight balance items. By replacing with the standard...
CHF27.90
En stock  
+ −
Ventilated Dual Slipper Set YZ-2/B-Max2
YOK-Z2-670V
CHF39.90
En stock  
+ −
Verfügbarkeit
Verfügbar beim Lieferanten
Abmessungen
Auswahlhilfe
Material
Prix

CHF  –  CHF

  • ‎CHF1.5
  • ‎CHF949
Reifen/Rad-Typ
Servo-Typ
Verwendung
Massstab
Motor / Antrieb
Einsatz
Anspruch
Lackierung
Fertigungsgrad
Max. Geschwindigkeit
Marke
Betriebsspannung
Effacer