Français (CH)
ERSATZTEIL-FINDER

Yokomo

Recommandés
48 Par page
Rear ESC mount for YD-2 series
YOK-Y2-REM-RA
A ESC mount set that can change the weight balance of the chassis by mounting the ESC on the rear overhang and greatly enhance the rear traction. Especially effective on roads with low grip, the load applied to the rear tires at the corner exit is overwhelming! It is possible to get a...
CHF 42.90
En stock  
+ −
13 Shock Cap (Plastic) for SO/MO2.0
YOK-S4-S813R
A resin cap for F13mm big bore shocks. Drain screw included. Contains 2 pieces.
CHF 8.50
En stock  
+ −
Rear suspension arm Type-B (F3 outer pin) for YZ-2
YOK-Z2-008R3A
F3 Outer pin spec
CHF 7.90
En stock  
+ −
Aluminum center mount for BD10F
YOK-B10-302CMA
entspricht: B10-302CM
CHF 84.90
En stock  
+ −
Alum.Main Chassis for MO Series
YOK-MO-002
CHF 84.90
En stock  
+ −
steel rear suspension mount for YZ-2T / YZ-2 (fron
YOK-Z2-300RFSA
This is a steel suspension mount for the YZ-2 series. It is a type used on the front side of the rear suspension, it increase the rear traction by increasing the weight compared to standard aluminum
CHF 26.90
En stock  
+ −
Aluminum Separate Suspension Mount (44.2mm)
YOK-B7-30142
 
CHF 16.90
En stock  
+ −
Brass Rear H Arm Weight A (10g)
YOK-Y2-008RW10
This optional part for the RD2.0/SD2.0 combines an aluminum rear H-arm with a brass weight to systematically increase rear traction. By mounting the weight on the rigid aluminum H-arm, the unsprung weight, which is directly loaded on the rear tires, is increased, effectively increasing tire...
CHF 41.90
En stock  
+ −
Aluminium 8.0mm cramp wheel hub for YD-2
YOK-Y2-011CB8A
entspricht: Y2-011CB8
CHF 12.90
En stock  
+ −
Turnbucke Upper Arm Set for MS1.0
YOK-MS-008T
This is a turnbuckle adjustable upper arm set that makes the most of the MS1.0's greatest feature, the linkage-type upper A-arm. This single set of front and rear upper arms allows for camber changes as well as fine caster angle adjustments.
CHF 41.90
En stock  
+ −
Front W/J Universal Set (Bearing type)
YOK-MS-010FWS
Universal Design with bearings mounted on the dogbones to reduce sliding resistance with the joint axle to the upmost limit. This reduces drive loss and stabilizes suspension operation, thereby increasing cornering speed.
CHF 83.80
En stock  
+ −
Steering Block L/R YZ-4
YOK-Z4-415SA
 
CHF 8.90
En stock  
+ −
Aluminium Radträger 2Stk. MS2.0
YOK-MS-415A-2
CHF 41.90
En stock  
+ −
YD-2/BD8 Brass Sus holder A (39.5~42.7mm)
YOK-TS-2149
Please be announced the new items made by brass for BD-8 and YD-2 series. This new suspension holder has released under Team Suzuki brand. It is the same shape but made by brass for gaining more weight to be functioned as vehicle weight balance items. By replacing with the standard...
CHF 27.90
En stock  
+ −
Chassis balance weight for YZ-2T
YOK-Z2-002RWTA
entspricht: Z2-002RWT
CHF 16.50
Rupture de stock
BD-10 Rear stabilizer wire set  (f (f1.1/1.2/1.3mm)
YOK-B10-412RWA
entspricht: B10-412RW
CHF 27.90
En stock  
+ −
Aluminium Motor Plate SO3.0
YOK-SO-304
CHF 27.90
En stock  
+ −
Alu Servohebel 23mm Clamp 25T Spline
YOK-Y2-204523A
entspricht: Y2-204523
CHF 18.90
En stock  
+ −
Kohlefaser Querlenker Vorne Unten 2.4mm MS2.0
YOK-MS-008F-2
CHF 27.90
En stock  
+ −
SO1.0/2.0 High Traction Offset Rear Suspension Arm
YOK-Z2-008R3H
SO series rear lower suspension arm. By shortening the wheelbase by up to 7mm on the suspension arm side, The rear load is increased by adding the angle of attack of the bone, and the rear grip is improved. Pitching control is also made easier, which improves turning performance.
CHF 20.90
En stock  
+ −
Aluminum Susp M Spacer 1.0mm BD7/BD8/BD9/BD10
YOK-B7-SS10A
entspricht: B7-SS10
CHF 17.90
En stock  
+ −
Rear stabilizer wire set for B-MAX4III
YOK-B4-412RW
 
CHF 13.90
En stock  
+ −
Flex Gear Differential Oil(35cc) DOT2
YOK-CS-DOT2
Oel-Vergleichstabelle #650 = DOT1 #800 = DOT2 #1000 = DOT3 #1200 = DOT4 #1600 = DOT5 #2100 = DOT6 #3000 = DOT7
CHF 11.90
En stock  
+ −
3holes Spur Gear 80T YZ-2
YOK-Z2-SG80SDA
entspricht: Z2-SG80SD
CHF 8.50
En stock  
+ −
Alu F/R Upper Arm Mount L/R YZ4-SF
YOK-S4-300UMA
entspricht: S4-300UM
CHF 41.50
En stock  
+ −
YOKOMO Factory T-Shirt L size
YOK-ZC-T27LA
entspricht: ZC-T27L
CHF 27.40
En stock  
+ −
Kingpin set YZ-2
YOK-Z2-414A
 
CHF 7.90
En stock  
+ −
YOKOMO Factory T-Shirt XL size
YOK-ZC-T27XLA
entspricht: ZC-T27XL
CHF 27.40
En stock  
+ −
Graphite Front Upper Arm Support YR-10US
YOK-YR-10US
 
CHF 13.50
En stock  
+ −
Side diffuser set for YD-2S
YOK-Y2-001SDA
Sideways grip feel will be improved. Chassis will be more stabilized and a smooth grip feeling can be realized also increasing top speed. By decreasing the gap between the chassis and the car body, the rigidity of the body is also improved.
CHF 19.90
En stock  
+ −
Upper Deck
YOK-B7-00314
 
CHF 26.90
En stock  
+ −
Bulk Head A (Front Left/Rear Right/Black)
YOK-B7-302A15
 
CHF 26.90
En stock  
+ −
Front/Rear wing mount for YZ-2DTM3/CAL3
YOK-Z2-001W3A
entspricht: Z2-001W3
CHF 10.90
En stock  
+ −
Bell Crank Bridge black
YOK-B7-201B6
 
CHF 26.90
En stock  
+ −
BD-10 Front stabilizer wire set  (f (f1.2/1.3/1.4mm)
YOK-B10-412FWA
entspricht: B10-412FW
CHF 26.90
En stock  
+ −
Yokomo Alu Wing Stay silber
YOK-D-056A
entspricht: D-056
CHF 12.90
En stock  
+ −
Yokomo Werkzeugset 1.5/2.0mm Imbus 5.5/7mm Stecksc
YOK-YT-YRTSBA
entspricht: YT-YRTSB
CHF 26.90
En stock  
+ −
Rear Transmission Case L/R (Carbon) YZ-4
YOK-Z4-302R
 
CHF 11.50
En stock  
+ −
F3.5 Suspension arm pin bush for YZ-2DTM3/CAL3
YOK-Z2-300BSA
for F3.5 inner pin
CHF 12.90
En stock  
+ −
Hard Graphite main Chassis YR-10 Formula
YOK-YR-02H
Hard graphite main chassis for YR-10 Formula
CHF 79.90
En stock  
+ −
Alu Susp. Mount Set YD-2
YOK-Y2-301AS
 
CHF 79.90
En stock  
+ −
YZ-2 CAL2 S2 LW Karosserie (w. masking)
YOK-Z2-DTMBLA
entspricht: Z2-DTMBL
CHF 27.90
En stock  
+ −
Aluminum front lower A arm set for YD-2 (black)
YOK-Y2-AS06BA
entspricht: Y2-AS06B
CHF 79.90
En stock  
+ −
Alu Cap for Gear Diff Case YD-2/YZ-2
YOK-Z2-503GHCA
entspricht: Z2-503GHC
CHF 15.90
En stock  
+ −
Aluminum front lower A arm set for YD-2 (red)
YOK-Y2-AS06RA
entspricht: Y2-AS06R
CHF 79.90
En stock  
+ −
BN Sports Toyota JZX100 Mark2 Body Set
YOK-SD-JZXBNB
The JZX100 Mark II, the most popular 4-door body, will be released as a new body for drifting. Moreover, the body is designed with BN Sports aero that brings out the power of a drift machine, and the one-piece molded body is easy to build and has a great silhouette. The all-in-one body also comes...
MaterialLexan Auswahlhilfe190mm Touring Massstab1:10 EinsatzOn-Road Drift Lackierungunlackiert
CHF 79.90
En stock  
+ −
Hex socket Rod End Ball (L Size/14.7mm)
YOK-ZC-206LHA
entspricht: ZC-206LH
CHF 6.90
En stock  
+ −
Alu rear hub carrier (Toe-in 0.5°) for B-MAX4III
YOK-B4-415R05
 
CHF 39.90
En stock  
+ −
Verfügbarkeit
Verfügbar beim Lieferanten
Abmessungen
Auswahlhilfe
Material
Prix
CHF
–
CHF
  • CHF 1.5
  • CHF 849
Reifen/Rad-Typ
Servo-Typ
Verwendung
Massstab
Motor / Antrieb
Einsatz
Anspruch
Lackierung
Fertigungsgrad
Max. Geschwindigkeit
Marke
Betriebsspannung