ERSATZTEIL-FINDER

Yokomo

Trier par:
Recommandé
48
Steering hub carrier / bushing YZ-2 DTM3.1/CAL3.1
YOK-Z2-413G3A
Graphite molded steering hub carrier for YZ-2 DTM3.1 / CAL3.1. The kingpin position has been changed to the front side compared to the past, and the shape has been changed to attach the steering stopper. Uses graphite resin, which is harder than the standard, and improves steering response.
CHF17.90
En stock  
+ −
Graphite Rear Axle for World conversion
YOK-R12-24SN
 
CHF42.90
En stock  
+ −
Titanium turn buckle set for YZ-2DTM3
YOK-Z2-TBSD3A
with Wrench
CHF42.90
En stock  
+ −
Rear hub carrier/Bushing (F3 pin/Hard type) DTM3/C
YOK-Z2-415RDCA
Hard type
CHF11.50
En stock  
+ −
Rear ESC mount for YD-2 series (Purple)
YOK-Y2-REM-PA
A ESC mount set that can change the weight balance of the chassis by mounting the ESC on the rear overhang and greatly enhance the rear traction. Especially effective on roads with low grip, the load applied to the rear tires at the corner exit is overwhelming! It is possible to get a...
CHF42.90
En stock  
+ −
Rear ESC mount for YD-2 series
YOK-Y2-REM-RA
A ESC mount set that can change the weight balance of the chassis by mounting the ESC on the rear overhang and greatly enhance the rear traction. Especially effective on roads with low grip, the load applied to the rear tires at the corner exit is overwhelming! It is possible to get a...
CHF42.90
En stock  
+ −
Rear suspension arm Type-B (F3 outer pin) for YZ-2
YOK-Z2-008R3A
F3 Outer pin spec
CHF7.90
En stock  
+ −
Aluminum center mount for BD10F
YOK-B10-302CMA
entspricht: B10-302CM
CHF84.90
En stock  
+ −
Alum.Main Chassis for MO Series
YOK-MO-002
CHF84.90
En stock  
+ −
steel rear suspension mount for YZ-2T / YZ-2 (fron
YOK-Z2-300RFSA
This is a steel suspension mount for the YZ-2 series. It is a type used on the front side of the rear suspension, it increase the rear traction by increasing the weight compared to standard aluminum
CHF26.90
En stock  
+ −
Aluminum Separate Suspension Mount (44.2mm)
YOK-B7-30142
 
CHF16.90
En stock  
+ −
Brass Rear H Arm Weight A (10g)
YOK-Y2-008RW10
This optional part for the RD2.0/SD2.0 combines an aluminum rear H-arm with a brass weight to systematically increase rear traction. By mounting the weight on the rigid aluminum H-arm, the unsprung weight, which is directly loaded on the rear tires, is increased, effectively increasing tire...
CHF41.90
En stock  
+ −
Turnbucke Upper Arm Set for MS1.0
YOK-MS-008T
This is a turnbuckle adjustable upper arm set that makes the most of the MS1.0's greatest feature, the linkage-type upper A-arm. This single set of front and rear upper arms allows for camber changes as well as fine caster angle adjustments.
CHF41.90
En stock  
+ −
Hard coat pivot ball for BD7 shock cap/end (4pcs)
YOK-B7-S8HA
entspricht: B7-S8H
CHF12.95
En stock  
+ −
YD-2/BD8 Brass Sus holder A (39.5~42.7mm)
YOK-TS-2149
Please be announced the new items made by brass for BD-8 and YD-2 series. This new suspension holder has released under Team Suzuki brand. It is the same shape but made by brass for gaining more weight to be functioned as vehicle weight balance items. By replacing with the standard...
CHF27.90
En stock  
+ −
Aluminum Center Link BD9/BD10
YOK-B9-201LBAA
including Ball bearing
CHF27.90
En stock  
+ −
DRIFT Oil
YOK-D-013A
Bearing oil made by Liqui Moly. Less friction and reduced wear.
CHF13.90
En stock  
+ −
BD-10 Rear stabilizer wire set  (f (f1.1/1.2/1.3mm)
YOK-B10-412RWA
entspricht: B10-412RW
CHF27.90
En stock  
+ −
Aluminium Motor Plate SO3.0
YOK-SO-304
CHF27.90
En stock  
+ −
Chassis balance weight for YZ-2T
YOK-Z2-002RWTA
entspricht: Z2-002RWT
CHF16.50
Rupture de stock
Rear stabilizer wire set for B-MAX4III
YOK-B4-412RW
 
CHF13.90
En stock  
+ −
RTC Graphite molded rear suspension arm for BD10/9
YOK-B10-RTC-1A
entspricht: B10-RTC-1
CHF13.90
En stock  
+ −
Alu Servohebel 23mm Clamp 25T Spline
YOK-Y2-204523A
entspricht: Y2-204523
CHF18.90
En stock  
+ −
30mm Fan Shroud SO2.0
YOK-SO-FSS20
This fan shroud is attached to the cooling fan of a 2WD off-road vehicle to increase the cooling effect of the motor. It will greatly contribute to maintaining motor performance and efficiency in the coming season of higher temperatures. A 30mm cooling fan is attached to the chassis via the...
CHF13.90
En stock  
+ −
Flex Gear Differential Oil(35cc) DOT2
YOK-CS-DOT2
Oel-Vergleichstabelle #650 = DOT1 #800 = DOT2 #1000 = DOT3 #1200 = DOT4 #1600 = DOT5 #2100 = DOT6 #3000 = DOT7
CHF11.90
En stock  
+ −
Aluminum Susp M Spacer 1.0mm BD7/BD8/BD9/BD10
YOK-B7-SS10A
entspricht: B7-SS10
CHF17.90
En stock  
+ −
Alu F/R Upper Arm Mount L/R YZ4-SF
YOK-S4-300UMA
entspricht: S4-300UM
CHF41.50
En stock  
+ −
YOKOMO Factory T-Shirt L size
YOK-ZC-T27LA
entspricht: ZC-T27L
CHF27.40
En stock  
+ −
Side diffuser set for YD-2S
YOK-Y2-001SDA
Sideways grip feel will be improved. Chassis will be more stabilized and a smooth grip feeling can be realized also increasing top speed. By decreasing the gap between the chassis and the car body, the rigidity of the body is also improved.
CHF19.90
En stock  
+ −
YOKOMO Factory T-Shirt XL size
YOK-ZC-T27XLA
entspricht: ZC-T27XL
CHF27.40
En stock  
+ −
Front/Rear Sway Bar Set for RS1.0
YOK-RS-412
This stabilizer set controls the roll of the RS1.0 and improves its turning performance on high-grip surfaces and other surfaces to enhance driving performance. It comes as a front and rear set, with 3 types of stabilizer bars from 1.2mm to 1.4mm, so you can enjoy setting it up according to the...
CHF41.00
En stock  
+ −
Steering Block L/R YZ-4
YOK-Z4-415SA
 
CHF8.90
En stock  
+ −
Graphite Front Upper Arm Support YR-10US
YOK-YR-10US
 
CHF13.50
En stock  
+ −
Upper Deck
YOK-B7-00314
 
CHF26.90
En stock  
+ −
Yokomo Alu Wing Stay silber
YOK-D-056A
entspricht: D-056
CHF12.90
En stock  
+ −
Bulk Head A (Front Left/Rear Right/Black)
YOK-B7-302A15
 
CHF26.90
En stock  
+ −
Bell Crank Bridge black
YOK-B7-201B6
 
CHF26.90
En stock  
+ −
Aluminium 8.0mm cramp wheel hub for YD-2
YOK-Y2-011CB8A
entspricht: Y2-011CB8
CHF12.90
En stock  
+ −
BD-10 Front stabilizer wire set  (f (f1.2/1.3/1.4mm)
YOK-B10-412FWA
entspricht: B10-412FW
CHF26.90
En stock  
+ −
Off-road body for SO series (light weight)
YOK-Z2-101S2L
CHF26.90
En stock  
+ −
YZ-2 CAL2 S2 LW Karosserie (w. masking)
YOK-Z2-DTMBLA
entspricht: Z2-DTMBL
CHF27.90
En stock  
+ −
Rear Transmission Case L/R (Carbon) YZ-4
YOK-Z4-302R
 
CHF11.50
En stock  
+ −
Hard Graphite main Chassis YR-10 Formula
YOK-YR-02H
Hard graphite main chassis for YR-10 Formula
CHF79.90
En stock  
+ −
Alu Cap for Gear Diff Case YD-2/YZ-2
YOK-Z2-503GHCA
entspricht: Z2-503GHC
CHF15.90
En stock  
+ −
Alu Susp. Mount Set YD-2
YOK-Y2-301AS
 
CHF79.90
En stock  
+ −
Aluminum front lower A arm set for YD-2 (black)
YOK-Y2-AS06BA
entspricht: Y2-AS06B
CHF79.90
En stock  
+ −
Kingpin set YZ-2
YOK-Z2-414A
 
CHF7.90
En stock  
+ −
Aluminum front lower A arm set for YD-2 (red)
YOK-Y2-AS06RA
entspricht: Y2-AS06R
CHF79.90
En stock  
+ −
Verfügbarkeit
Verfügbar beim Lieferanten
Abmessungen
Auswahlhilfe
Material
Prix

CHF  –  CHF

  • ‎CHF1.5
  • ‎CHF949
Reifen/Rad-Typ
Servo-Typ
Verwendung
Massstab
Motor / Antrieb
Einsatz
Anspruch
Lackierung
Fertigungsgrad
Max. Geschwindigkeit
Marke
Betriebsspannung
Effacer