Deutsch (CH)
ERSATZTEIL-FINDER

Yokomo

Ordnen nach:
Empfohlen
Zeigen:
48
Titanium turn buckle set for YZ-2DTM3
YOK-Z2-TBSD3A
with Wrench
CHF 42.90
Auf Lager  
+ −
Steering hub carrier / bushing YZ-2 DTM3.1/CAL3.1
YOK-Z2-413G3A
Graphite molded steering hub carrier for YZ-2 DTM3.1 / CAL3.1. The kingpin position has been changed to the front side compared to the past, and the shape has been changed to attach the steering stopper. Uses graphite resin, which is harder than the standard, and improves steering response.
CHF 17.90
Auf Lager  
+ −
Rear ESC mount for YD-2 series
YOK-Y2-REM-RA
A ESC mount set that can change the weight balance of the chassis by mounting the ESC on the rear overhang and greatly enhance the rear traction. Especially effective on roads with low grip, the load applied to the rear tires at the corner exit is overwhelming! It is possible to get a...
CHF 42.90
Auf Lager  
+ −
Steering Block BD9/BD10
YOK-B9-415SA
entspricht: B9-415S
CHF 11.50
Auf Lager  
+ −
Aluminum suspension mount set for RD2.0
YOK-RD-301AS
This aluminum suspension mount set for RD2.0 further enhances driving performance. The B width for the front is 43.5mm standard, and the D width for the rear is 57.2mm standard for both the front and rear sides, but the suspension pin width can be fine-tuned by changing the suspension mount...
CHF 85.50
Auf Lager  
+ −
3holes Spur Gear 80T YZ-2
YOK-Z2-SG80SDA
entspricht: Z2-SG80SD
CHF 8.50
Auf Lager  
+ −
Rear hub carrier/Bushing (F3 pin/Hard type) DTM3/C
YOK-Z2-415RDCA
Hard type
CHF 11.50
Auf Lager  
+ −
Aluminum center mount for BD10F
YOK-B10-302CMA
entspricht: B10-302CM
CHF 84.90
Auf Lager  
+ −
Alum.Main Chassis for MO Series
YOK-MO-002
CHF 84.90
Auf Lager  
+ −
Rear suspension arm Type-B (F3 outer pin) for YZ-2
YOK-Z2-008R3A
F3 Outer pin spec
CHF 7.90
Auf Lager  
+ −
Aluminum Separate Suspension Mount (44.2mm)
YOK-B7-30142
 
CHF 16.90
Auf Lager  
+ −
Brass Rear H Arm Weight A (10g)
YOK-Y2-008RW10
This optional part for the RD2.0/SD2.0 combines an aluminum rear H-arm with a brass weight to systematically increase rear traction. By mounting the weight on the rigid aluminum H-arm, the unsprung weight, which is directly loaded on the rear tires, is increased, effectively increasing tire...
CHF 41.90
Auf Lager  
+ −
Neu
Aluminium Radträger 2Stk. MS2.0
YOK-MS-415A-2
CHF 41.90
Auf Lager  
+ −
steel rear suspension mount for YZ-2T / YZ-2 (fron
YOK-Z2-300RFSA
This is a steel suspension mount for the YZ-2 series.
CHF 26.90
Auf Lager  
+ −
YD-2/BD8 Brass Sus holder A (39.5~42.7mm)
YOK-TS-2149
Please be announced the new items made by brass for BD-8 and YD-2 series.
CHF 27.90
Auf Lager  
+ −
Aluminum Center Link BD9/BD10
YOK-B9-201LBAA
including Ball bearing
CHF 27.90
Auf Lager  
+ −
Chassis balance weight for YZ-2T
YOK-Z2-002RWTA
entspricht: Z2-002RWT
CHF 16.50
Nicht auf Lager
BD-10 Rear stabilizer wire set  (f (f1.1/1.2/1.3mm)
YOK-B10-412RWA
entspricht: B10-412RW
CHF 27.90
Auf Lager  
+ −
Aluminium Motor Plate SO3.0
YOK-SO-304
CHF 27.90
Auf Lager  
+ −
Alu Servohebel 23mm Clamp 25T Spline
YOK-Y2-204523A
entspricht: Y2-204523
CHF 18.90
Auf Lager  
+ −
Rear stabilizer wire set for B-MAX4III
YOK-B4-412RW
 
CHF 13.90
Auf Lager  
+ −
30mm Fan Shroud SO2.0
YOK-SO-FSS20
This fan shroud is attached to the cooling fan of a 2WD off-road vehicle to increase the cooling effect of the motor. It will greatly contribute to maintaining motor performance and efficiency in the coming season of higher temperatures. A 30mm cooling fan is attached to the chassis via the...
CHF 13.90
Auf Lager  
+ −
Aluminum Susp M Spacer 1.0mm BD7/BD8/BD9/BD10
YOK-B7-SS10A
entspricht: B7-SS10
CHF 17.90
Auf Lager  
+ −
Flex Gear Differential Oil(35cc) DOT2
YOK-CS-DOT2
Oel-Vergleichstabelle #650 = DOT1 #800 = DOT2 #1000 = DOT3 #1200 = DOT4 #1600 = DOT5 #2100 = DOT6 #3000 = DOT7
CHF 11.90
Auf Lager  
+ −
Alu F/R Upper Arm Mount L/R YZ4-SF
YOK-S4-300UMA
entspricht: S4-300UM
CHF 41.50
Auf Lager  
+ −
Kingpin set YZ-2
YOK-Z2-414A
 
CHF 7.90
Auf Lager  
+ −
Front Wheel
YOK-B4-821A
entspricht: B4-821
AuswahlhilfeBuggy MaterialKunststoff Reifen/Rad-TypFelgen Massstab1:10 EinsatzOff-Road
CHF 5.90
Auf Lager  
+ −
YOKOMO Factory T-Shirt L size
YOK-ZC-T27LA
entspricht: ZC-T27L
CHF 27.40
Auf Lager  
+ −
Side diffuser set for YD-2S
YOK-Y2-001SDA
Sideways grip feel will be improved.
CHF 19.90
Auf Lager  
+ −
YOKOMO Factory T-Shirt XL size
YOK-ZC-T27XLA
entspricht: ZC-T27XL
CHF 27.40
Auf Lager  
+ −
Front/Rear Sway Bar Set for RS1.0
YOK-RS-412
This stabilizer set controls the roll of the RS1.0 and improves its turning performance on high-grip surfaces and other surfaces to enhance driving performance. It comes as a front and rear set, with 3 types of stabilizer bars from 1.2mm to 1.4mm, so you can enjoy setting it up according to the...
CHF 41.00
Auf Lager  
+ −
Steering Block L/R YZ-4
YOK-Z4-415SA
 
CHF 8.90
Auf Lager  
+ −
Graphite Front Upper Arm Support YR-10US
YOK-YR-10US
 
CHF 13.50
Auf Lager  
+ −
Upper Deck
YOK-B7-00314
 
CHF 26.90
Auf Lager  
+ −
Front/Rear wing mount for YZ-2DTM3/CAL3
YOK-Z2-001W3A
entspricht: Z2-001W3
CHF 10.90
Auf Lager  
+ −
Bulk Head A (Front Left/Rear Right/Black)
YOK-B7-302A15
 
CHF 26.90
Auf Lager  
+ −
Bell Crank Bridge black
YOK-B7-201B6
 
CHF 26.90
Auf Lager  
+ −
Yokomo Alu Wing Stay silber
YOK-D-056A
entspricht: D-056
CHF 12.90
Auf Lager  
+ −
BD-10 Front stabilizer wire set  (f (f1.2/1.3/1.4mm)
YOK-B10-412FWA
entspricht: B10-412FW
CHF 26.90
Auf Lager  
+ −
Rear Transmission Case L/R (Carbon) YZ-4
YOK-Z4-302R
 
CHF 11.50
Auf Lager  
+ −
Aluminium 8.0mm cramp wheel hub for YD-2
YOK-Y2-011CB8A
entspricht: Y2-011CB8
CHF 12.90
Auf Lager  
+ −
Hard Graphite main Chassis YR-10 Formula
YOK-YR-02H
Hard graphite main chassis for YR-10 Formula
CHF 79.90
Auf Lager  
+ −
Alu Susp. Mount Set YD-2
YOK-Y2-301AS
 
CHF 79.90
Auf Lager  
+ −
F3.5 Suspension arm pin bush for YZ-2DTM3/CAL3
YOK-Z2-300BSA
for F3.5 inner pin
CHF 12.90
Auf Lager  
+ −
Aluminum front lower A arm set for YD-2 (black)
YOK-Y2-AS06BA
entspricht: Y2-AS06B
CHF 79.90
Auf Lager  
+ −
Turnbucke Upper Arm Set for MS1.0
YOK-MS-008T
This is a turnbuckle adjustable upper arm set that makes the most of the MS1.0's greatest feature, the linkage-type upper A-arm. This single set of front and rear upper arms allows for camber changes as well as fine caster angle adjustments.
CHF 41.90
Nicht auf Lager
Aluminum front lower A arm set for YD-2 (red)
YOK-Y2-AS06RA
entspricht: Y2-AS06R
CHF 79.90
Auf Lager  
+ −
Aluminum Adj. Suspension Mount Set Rot für RD2.0
YOK-RD-301ASR
CHF 79.90
Auf Lager  
+ −
Verfügbarkeit
Verfügbar beim Lieferanten
Abmessungen
Auswahlhilfe
Material
Preis
CHF
–
CHF
  • CHF 1.5
  • CHF 949
Reifen/Rad-Typ
Servo-Typ
Verwendung
Massstab
Motor / Antrieb
Einsatz
Anspruch
Lackierung
Fertigungsgrad
Max. Geschwindigkeit
Marke
Betriebsspannung
Zurücksetzen (reset)