Français (CH)
ERSATZTEIL-FINDER

Yokomo

Trier par:
Recommandé
Montrer:
48
RTC Universal shaft for BD8/BD7 2016
YOK-B8-RTC-04
 
CHF 39.90
En stock  
+ −
Multi Stand Team Yokomo
YOK-YT-MTS
Dieser Mehrfachständer nutzt den Platz im Pit effektiv und kann für die Lagerung von Maschinen, die Installation von Ladegeräten usw. verwendet werden. Dieser einfach zusammengebaute Ständer aus Harz kann beim Transport kompakt verstaut werden und wird schnell aufgebaut, wenn er im Pit...
CHF 39.90
En stock  
+ −
F3.5 Suspension arm pin bush for YZ-2DTM3/CAL3
YOK-Z2-300BSA
for F3.5 inner pin
CHF 12.90
En stock  
+ −
Brass Rear H Arm Weight B (5g)
YOK-Y2-008RW5
This optional part for the RD2.0/SD2.0 combines an aluminum rear H-arm with a brass weight to systematically increase rear traction. By mounting the weight on the rigid aluminum H-arm, the unsprung weight, which is directly loaded on the rear tires, is increased, effectively increasing tire...
CHF 39.90
En stock  
+ −
Double Bearing Front Axle Set for Drift
YOK-RD-010FDS
Double-bearing front axle for use with RD/SD/MD series front axles. The double bearing holding the axle shaft distributes friction and reduces rotational resistance of the front tire to the utmost limit. Axle shaft is made of steel but F3mm to reduce weight and rotational moment. The front end...
CHF 39.90
En stock  
+ −
YZ-2 CAL2 S2 LW Karosserie (w. masking)
YOK-Z2-DTMBLA
entspricht: Z2-DTMBL
CHF 27.90
En stock  
+ −
Main Chassis RS2.0
YOK-RS-002P
CHF 39.90
En stock  
+ −
Turnbuckle und Hardware Set für Yokomo SD
HSH-YOK-TURNHARD
Turnbuckle und Hardware Set für Yokomo SD
CHF 19.90
En stock  
+ −
Center & Rear Pulley w/Frange YZ-4
YOK-Z4-630CR
 
CHF 9.90
En stock  
+ −
Alu Cap for Gear Diff Case YD-2/YZ-2
YOK-Z2-503GHCA
entspricht: Z2-503GHC
CHF 15.90
En stock  
+ −
Bell Crunk/Link/Servo Mount 17/20mm Servo Horn
YOK-Z2-200
 
CHF 19.50
En stock  
+ −
Adapter
YOK-YT-TSG
 
CHF 38.90
En stock  
+ −
Hex socket Rod End Ball (L Size/14.7mm)
YOK-ZC-206LHA
entspricht: ZC-206LH
CHF 6.90
En stock  
+ −
Alu Front Steering Hub Carrier YD-4
YOK-Y4-413C
 
CHF 38.90
En stock  
+ −
Alu Sturzwinkel und Höhenmesser schwarz
YOK-YT-HCGBA
entspricht: YT-HCGB
CHF 25.90
En stock  
+ −
Aero S Type Rear Wing DTM2
YOK-Z2-DTM2WA
entspricht: Z2-DTM2W
CHF 14.90
Rupture de stock
RTC Lower Caster block
YOK-B9-RTC-02A
Aluminum made
CHF 38.50
En stock  
+ −
Graphite Main Chassis YRX12
YOK-YX-02
 
CHF 76.90
En stock  
+ −
Front/Rear wing mount for YZ-2DTM3/CAL3
YOK-Z2-001W3A
entspricht: Z2-001W3
CHF 10.90
En stock  
+ −
Aluminum motor mount for BD12
YOK-B12-302M
CHF 76.90
En stock  
+ −
H12 Front Wheel (Yellow) leucht gelb
YOK-B2-821HYA
AuswahlhilfeBuggy MaterialKunststoff Reifen/Rad-TypFelgen Massstab1:10 EinsatzOff-Road
CHF 6.40
En stock  
+ −
Aluminium Center Link YZ-4
YOK-Z4-201CL
 
CHF 32.50
En stock  
+ −
Alu Top Shaft (Hard anodized) YZ-4
YOK-Z4-303TA
 
CHF 10.90
En stock  
+ −
Aluminum Servo Mount BD9/BD10
YOK-B9-203BA
entspricht: B9-203B
CHF 37.90
En stock  
+ −
Rear suspension arm (Graphite molded) YZ4SF
YOK-S4-008RS4A
entspricht: S4-008RS4
CHF 12.50
En stock  
+ −
Lower Bulkhead (A) BD9/BD10
YOK-B9-32LA19A
(F Left /R Right)
CHF 37.90
En stock  
+ −
Team Yokomo compact nylon tool bag
YOK-YT-YTBA
A tool bag finished with durable nylon fabric and careful sewing. The main storage compartment is double zip type which makes easy to open or close the bag. The back of the lid has a compartment pocket for storing tools and a zipper pocket for storing thin items. The main compartment allows...
CHF 37.90
En stock  
+ −
Aluminum Gear Differential Case (with 38T pulley)
YOK-MS-503GHA
Used in place of the standard plastic gear diff case, this aluminum diff case increases diff oil heat dissipation and stabilizes operating effectiveness. Especially during the summer season, it can prevent oversteer due to low differential oil viscosity and stabilize lap times. The pulley part is...
CHF 64.90
Rupture de stock
RTC Aluminum hub carrier for BD10/9
YOK-B10-RTC-3A
entspricht: B10-RTC-3
CHF 37.90
En stock  
+ −
Aluminum Light Weight SP Steering Block RD/SD
YOK-Y2-415SAA
The 0 offset steering block adopted from SD2.0, which has been well-received for its neutral steering characteristics, is now made of aluminum to enhance steering response.
CHF 37.90
En stock  
+ −
Aluminum suspension mount for YZ-2T
YOK-Z2-300RFTA
entspricht: Z2-300RFT
CHF 22.90
En stock  
+ −
Alu lightweight SP Steering Block RD/SD Blue
YOK-Y2-415SABL
This is a color version of the Offset 0 steering block for the RD/SD series, which has been well- eceived for its neutral characteristics, and now comes in three new colors: blue, purple, and red to match the machine color. Compared to the standard plastic blocks, the aluminum version is much...
CHF 37.90
En stock  
+ −
Front Double Joint/Pin
YOK-B7-010TWC
CHF 18.90
En stock  
+ −
Ball End Cap YD-4
YOK-Y4-207A
entspricht: Y4-207
CHF 9.90
En stock  
+ −
Alu Separate Susp. Mount 44.2mm
YOK-B7-3142BS
 
CHF 18.90
En stock  
+ −
Graphite Main Chassis YR-02
YOK-YR-02
 
CHF 74.90
En stock  
+ −
Center Gear Giff.Assembbly for B-YZ4SF
YOK-S4-504
CHF 74.90
En stock  
+ −
Fluorine Rubber Diaphragm für SLF Short Shock II
YOK-B7-8DF16
CHF 5.90
En stock  
+ −
Aluminum motor mount BD11
YOK-B11-302MA
entspricht: B11-302M
CHF 74.90
En stock  
+ −
Brass rear hub carrier for YD-2 series
YOK-Y2-415RBA
It is a rear hub carrier that can be used in common with the YD-2 series. Made from heavy brass, it greatly increases the unsprung weight that directly loads the tire, increasing rear traction.
CHF 74.90
En stock  
+ −
Aluminium Servo Mount YD-4
YOK-Y4-203AA
 
CHF 23.90
En stock  
+ −
YZ-4 High Flex Graphite upper deck
YOK-Z4-003S
 
CHF 24.90
En stock  
+ −
Rear Drive Belt
YOK-BD-189LA
entspricht: BD-189L
CHF 6.75
En stock  
+ −
Yokomo T-Shirt Grösse M
YOK-ZC-T27MA
entspricht: ZC-T27M
CHF 24.90
En stock  
+ −
BD-10 Rear Stiffner (Steel)
YOK-B10-302SA
entspricht: B10-302S
CHF 24.90
En stock  
+ −
Aluminum wing plate
YOK-B7-110A
entspricht: B7-110
CHF 12.90
En stock  
+ −
Maintenance kit for double joints BD11
YOK-B11-010TWA
entspricht: B11-010TW
CHF 24.90
En stock  
+ −
Alum. 13 Shock Cap Ball Hard for SO/MO2.0
YOK-YS-8BH13
Shock cap ball for F13mm big bore shock. The surface is hard coated to make it resistant to abrasion. Contains 4 pieces.
CHF 11.90
En stock  
+ −
Verfügbarkeit
Verfügbar beim Lieferanten
Abmessungen
Auswahlhilfe
Material
Prix
CHF
–
CHF
  • CHF 1.5
  • CHF 949
Reifen/Rad-Typ
Servo-Typ
Verwendung
Massstab
Motor / Antrieb
Einsatz
Anspruch
Lackierung
Fertigungsgrad
Max. Geschwindigkeit
Marke
Betriebsspannung
Effacer