ERSATZTEIL-FINDER

Yokomo

Trier par:
Recommandé
48
Rear short shock shaft (titanium coat) for YZ-2DTM
YOK-S4-S2MTA
A shock shaft that can be used on the rear of the YZ-2DTM3 / CAL3 and the front of the YZ-2T. The shaft diameter is F3.0mm, which is thinner than the standard F3.3mm, and it is possible to reduce friction and enhance the shock absorption effect. Since the shaft surface is coated with titanium,...
CHF23.50
En stock  
+ −
Graphite rear lower suspension arms (left) BD11
YOK-B11-008RLA
entspricht: B11-008RL
CHF36.90
En stock  
+ −
Graphite rear lower suspension arms (right) BD11
YOK-B11-008RRA
entspricht: B11-008RR
CHF36.90
En stock  
+ −
Front/Rear wing mount for YZ-2DTM3/CAL3
YOK-Z2-001W3A
entspricht: Z2-001W3
CHF10.90
En stock  
+ −
Graphite front lower suspension arm (L) +0.5mm
YOK-B11-008FL1
This suspension arm was used by team drivers and achieved good results at the 2023 IFMAR World Championship. The front is 0.5mm longer than the standard of the first generation BD11, improving steering response and turning performance. It also reduces the burden on the front tires, so it is...
CHF36.90
En stock  
+ −
Graphite rear lower suspension arm (R) -1.0mm
YOK-B11-008RR1
This suspension arm was used by team drivers and achieved good results at the 2023 IFMAR World Championship. It is 1mm shorter than standard, making it easier for the roll force to work to improve traction. It is especially suitable for road conditions with low grip, such as outdoor asphalt,...
CHF36.90
En stock  
+ −
Camber Gauge PRO (Black)
YOK-YT-CGPA
entspricht: YT-CGP
CHF16.90
En stock  
+ −
Graphite rear lower suspension arm (L)-1.0mm
YOK-B11-008RL1
This suspension arm was used by team drivers and achieved good results at the 2023 IFMAR World Championship. It is 1mm shorter than standard, making it easier for the roll force to work to improve traction. It is especially suitable for road conditions with low grip, such as outdoor asphalt,...
CHF36.90
En stock  
+ −
Bell crank (F8×F5 bearing assembled)
YOK-B7-202SB
 
CHF35.90
En stock  
+ −
Racing Performer F3.5 Bullet/Female Connecter set
YOK-RP-107A
3.5mm diameter banana connector used for motor connection. Set of 3 male/female set
CHF8.00
En stock  
+ −
Front Univ. Shaft 79mm YZ-4
YOK-Z4-01079
 
CHF35.90
En stock  
+ −
Slide Rack YD-4
YOK-Y4-202R
 
CHF35.90
En stock  
+ −
Nickel hard steel turn buckle 48mm 2stk.
YOK-SD-TB48NA
entspricht: SD-TB48N
CHF4.50
En stock  
+ −
Aluminum front lower bulkhead (A) BD11
YOK-B11-32FLAA
entspricht: B11-32FLA
CHF35.90
En stock  
+ −
Aluminum front lower bulkhead (B) BD11
YOK-B11-32FLBA
entspricht: B11-32FLB
CHF35.90
En stock  
+ −
Ball differential kit for MR/RS
YOK-B2-500MR
 
CHF49.90
En stock  
+ −
Brass center stiffener for BD12
YOK-B12-302CSB
CHF35.90
En stock  
+ −
Alum.St.Bellcrank set for RO1.0/SO1.0
YOK-Z2-201SBS
This is an aluminum bell crank set that gives the RO1.0/SO1.0 steering even sharper.
CHF71.80
En stock  
+ −
Drive Cup Protector BD9/BD10
YOK-B9-500DPA
(Hard)
CHF6.50
En stock  
+ −
Aluminum Steering Bell Crank L/R SD3.0
YOK-SD-202S3
CHF35.90
En stock  
+ −
Lipo Bag Team Yokomo
YOK-YB-LSBB
Battery bag for charging and storing Li-po batteries. The flame-retardant material prevents the spread of fire in the unlikely event that the battery catches fire. It has a safe large capacity and can hold 6 short batteries, making it convenient for storage and transportation. Internal...
CHF23.90
En stock  
+ −
Case for Parts (190×225×40mm)
YOK-YC-7A
entspricht: YC-7
CHF19.90
En stock  
+ −
Alum.Servo Mount for MO2.0
YOK-MO-203A
CHF23.90
En stock  
+ −
Alminum Suspension mount (43.5mm·Black)
YOK-B7-3135B
 
CHF17.90
En stock  
+ −
Body Mount Set
YOK-BD-016
CHF6.90
En stock  
+ −
Aluminum Separate Suspension Mount (42.0mm)
YOK-B7-3120BS
 
CHF17.90
En stock  
+ −
Graphite molded front steering hub carrier BD12
YOK-B12-413G
CHF17.90
En stock  
+ −
Curved Slide Rack Upper Deck for YD-2E series
YOK-Y2-202UDA
entspricht: Y2-202UD
CHF41.90
Rupture de stock
Graphite molded LC Gearbox SO1.0/2.0
YOK-Z2-302TLCG
This is the LC gearbox for the SO series of 2WD off-road cars. Graphite-mixed resin, which is harder than standard, is used to increase the rigidity of the rear area. Especially when the throttle is turned on, there is less yawing and snagging, allowing for sharper cornering.
CHF17.90
En stock  
+ −
Flex Gear Differential Oil(35cc) DOT5
YOK-CS-DOT5
Oel-Vergleichstabelle #650 = DOT1 #800 = DOT2 #1000 = DOT3 #1200 = DOT4 #1600 = DOT5 #2100 = DOT6 #3000 = DOT7
CHF11.90
En stock  
+ −
Turnbucke Upper Arm Set for MS1.0
YOK-MS-008T
This is a turnbuckle adjustable upper arm set that makes the most of the MS1.0's greatest feature, the linkage-type upper A-arm. This single set of front and rear upper arms allows for camber changes as well as fine caster angle adjustments.
CHF41.90
En stock  
+ −
Front Double Joint Universal Maintenance Kit
YOK-MO-010WM
CHF11.90
En stock  
+ −
Front inner suspension pin
YOK-B2-009BFA
entspricht: B2-009BF
CHF5.50
En stock  
+ −
Front Shock Tower B7 2016
YOK-B7-01716
 
CHF17.50
En stock  
+ −
Rear Roll Damper mount (right Side) YR-22R
YOK-YR-22R
 
CHF17.50
En stock  
+ −
Suspension Mount Bush / Bamper / B Mount
YOK-B4-300B
 
CHF12.10
En stock  
+ −
Réduction 41%
Réduction 41%
SCR-BL Fahrtenregler für brushed Motoren
YOK-SCR-BL
AKTION SOLANGE VORRAT This is a speed controller dedicated to brush motors, which is very popular among beginners and intermediate players. This model was also used in Yokomo's pre-assembled competition off-road car, and it is equipped with a large heat sink, making it a tough performance...
CHF59.00 CHF35.00
Vous économisez: CHF24.00
En stock  
+ −
Double Joint Front Universal
YOK-B7-010FWC
Yokomo released new Double Joint Front Universal for our 1/10 sized touring car BD7.
CHF69.90
En stock  
+ −
Front Wheel
YOK-B4-821A
entspricht: B4-821
AuswahlhilfeBuggy MaterialKunststoff Reifen/Rad-TypFelgen Massstab1:10 EinsatzOff-Road
CHF5.90
En stock  
+ −
Front ”X33” Shock set for YZ-2 series
YOK-Z2-S1S2A
entspricht: Z2-S1S2
CHF69.90
En stock  
+ −
Aluminum Susp M Spacer(0.5mm)BD7/BD8/BD9/BD10
YOK-B7-SS05A
 
CHF16.90
En stock  
+ −
BD-10 Motor (Motor Mount
YOK-B10-302MA
entspricht: B10-302M
CHF69.90
En stock  
+ −
Aluminum Suspension Mount Spacer(0.8mm)
YOK-B7-SS08A
entspricht: B7-SS08
CHF16.90
En stock  
+ −
Yokomo Pit Bag IV
YOK-YT-24BK4
Hand-held pit bag convenient for storing machines and peripheral equipment, with a large capacity to hold a 1/10-size drift car with the body attached, and a two-tiered inner box. Outer dimensions: about 26 x 31 x 52 cm Inner box dimensions: about 246 x 146 x 482 mm
CHF69.90
En stock  
+ −
Main Chassis B-Max
YOK-BM-002
 
CHF34.90
En stock  
+ −
Karosserie YZ-4 inkl. Maskierfolie
YOK-Z4-101
 
AuswahlhilfeBuggy Massstab1:10 EinsatzOff-Road Lackierungunlackiert HerstellerYokomo
CHF31.90
En stock  
+ −
Battery holder set
YOK-B7-11815
 
CHF34.90
En stock  
+ −
Center Bulkhead (Right)
YOK-B9-302RA
entspricht: B9-302R
CHF34.90
En stock  
+ −
Verfügbarkeit
Verfügbar beim Lieferanten
Abmessungen
Auswahlhilfe
Material
Prix

CHF  –  CHF

  • ‎CHF1.5
  • ‎CHF949
Reifen/Rad-Typ
Servo-Typ
Verwendung
Massstab
Motor / Antrieb
Einsatz
Anspruch
Lackierung
Fertigungsgrad
Max. Geschwindigkeit
Marke
Betriebsspannung
Effacer