Français (CH)
ERSATZTEIL-FINDER

Yokomo

Recommandés
48 Par page
Aluminum front upper bulkhead (A) BD11
YOK-B11-32FUAA
entspricht: B11-32FUA
CHF 32.90
En stock  
+ −
Spool Drive Cup BD9/BD10
YOK-B9-501MCSA
(Steel made)
CHF 12.50
En stock  
+ −
Aluminum front upper bulkhead (B) BD11
YOK-B11-32FUBA
entspricht: B11-32FUB
CHF 32.90
En stock  
+ −
Aluminum Front Solid Axle for RS1.0/RS2.0
YOK-RS-501S
A new solid axle kit has been long awaited by RS riders looking to improve their times! Lighter than a standard geared differential, it eliminates unnecessary differential operation, resulting in a more stable ride. It is particularly effective on high grip surfaces such as carpet, providing...
CHF 32.90
En stock  
+ −
HD f5.5mm Rod end ball (Screw 10mm long/4pcs) for
YOK-Z2-206-10A
entspricht: Z2-206-10
CHF 6.90
En stock  
+ −
Suspension Mount messing 44.2mm 13.1gr.
YOK-B7-3142BB
Brass -1mm lower suspension mount (44.2mm·13.1g)
CHF 21.90
En stock  
+ −
Suspension Mount messing 45.7mm 13.5gr.
YOK-B7-3157BB
Brass -1mm lower suspension mount (45.7mm·13.5g)
CHF 21.90
En stock  
+ −
Ceramic 1/8 Inch Differential Ball
YOK-R12-24C
CHF 11.90
En stock  
+ −
Suspension Mount messing 46.4mm 13.7gr.
YOK-B7-3164BB
Brass -1mm lower suspension mount (46.4mm·13.7g)
CHF 21.90
En stock  
+ −
YZ-2CAL3/DTM3 Graphite Rear Shock Tower
YOK-Z2-018-5A
Yokomo's new design shock tower for YZ-2CAL3/DTM3 of cars. Based on the original 3 mounting holes, more 2 holes are added, and it becomes a total of 5 mounting positions. This big change expands the setting range and makes more detailed setting become possible. Its body uses...
CHF 21.90
En stock  
+ −
Super blend Shock Oil 400
YOK-YS-400B
entspricht: YS-400A
CHF 5.90
En stock  
+ −
Front Sus_arm L/R for MO Series
YOK-MO-008F
CHF 10.90
En stock  
+ −
Foward motor Conversion kit
YOK-B7-FMC
 
CHF 32.50
En stock  
+ −
Rear ”X33” Shock set for YZ-2 series
YOK-Z2-S1L2A
entspricht: Z2-S1L2
CHF 64.90
En stock  
+ −
Rear X Shock Set
YOK-BM-1L12
 
CHF 65.00
En stock  
+ −
Aluminum Servo Mount for YD-2ZX (Black)
YOK-Y2-203ZA
Aluminum servo mount for YD-2ZX. It is compatible with low profile servos and has a height of approximately 17 mm. The color is black and comes in 2 pieces.
CHF 32.50
En stock  
+ −
Rear Short Suspension Arm Conv. Set BD7
YOK-B7-SACR
 
CHF 64.90
En stock  
+ −
GReddy R35 Spec-D 1:10 Light Unit
YOK-SD-GR35LA
entspricht: SD-GR35L
CHF 9.90
En stock  
+ −
Front Double Joint Universal Shaft (73mm)
YOK-MO-010FW
This is a front double-joint universal shaft for MO1.0/2.0. On high-grip surfaces, for example, the steering is often run at full steering angle, which places a heavy load on the universal shaft. In particular, when joints are operated at an angle, the viewpoint is spoiled and the risk of wear...
CHF 64.90
En stock  
+ −
Stabilizer Set (f1.0~f1.6mm)
YOK-BD-412W
CHF 14.20
En stock  
+ −
Graphite Rear Suspension Arm (Damper Pivot 41.5mm)
YOK-BD-008RG2
 
CHF 12.90
En stock  
+ −
Rear Short Suspension Arm Graphite
YOK-BD-008RS
 
CHF 12.90
En stock  
+ −
F4mm Spacer shimm (0.05mm·0.1mm·0.2mm)
YOK-ZC-S40SA
entspricht: ZC-S40S
CHF 6.90
En stock  
+ −
Clump Wheel Hub (5.0mm·Black)
YOK-BD-011CBA
entspricht: BD-011CB
CHF 12.90
En stock  
+ −
Steering Block ST Crunk ST Stopper YR-07
YOK-YR-07
 
CHF 12.90
En stock  
+ −
Yokomo Strapping Tape 12mmx50m black
YOK-YT-2BKA
entspricht: YT-2BK
CHF 14.90
En stock  
+ −
Suspension Mount messing 43.5mm 12.9gr.
YOK-B7-3135BB
 
CHF 21.50
En stock  
+ −
Shock Cap Nut engraved mark BD8
YOK-B8-S4C
 
CHF 21.50
En stock  
+ −
Graphite Front Body Mount Support
YOK-BD-016FS
CHF 14.90
En stock  
+ −
Alu Steering Bell Clunk for DTM2
YOK-Z2-201DSB
CHF 64.50
En stock  
+ −
Front bulkhead / Upper arm holder
YOK-Y2-302ZDA
entspricht: Y2-302ZD
CHF 21.50
En stock  
+ −
Front stabilizer set YZ-2 (6 wires)
YOK-Z2-412F2
CHF 21.00
En stock  
+ −
Graphite Molded Front Bulkhead for RO/SO
YOK-Z2-002BG
This stabilizer set controls the roll of the RS1.0 and improves its turning performance on high-grip surfaces and other surfaces to enhance driving performance. It comes as a front and rear set, with 3 types of stabilizer bars from 1.2mm to 1.4mm, so you can enjoy setting it up according to the...
CHF 12.80
En stock  
+ −
Graphite battery holder for MR/RS rear motor
YOK-B2-118RA
 
CHF 31.90
En stock  
+ −
Yokomo Multi Spring Case
YOK-YT-29
This spring case allows you to neatly store shock springs, which tend to be cumbersome. The lower section is designed to hold springs for a variety of spring types, from speed to off-road, and the upper section can hold springs in their bagged state. Of course, it comes with the Yokomo Racing...
CHF 31.90
En stock  
+ −
HG Radial Tire Type T 4stk. 24mm
YOK-ZR-R03T
 
Auswahlhilfe190mm Touring MaterialGummi Reifen/Rad-TypReifen Massstab1:10 EinsatzOn-Road
CHF 15.90
En stock  
+ −
Yokomo Racing Performer Ultra Shock Oil 50wt
YOK-RP-085500A
entspricht: RP-085500
CHF 12.00
En stock  
+ −
Graphite Front Shock Tower SO3.0
YOK-SO-017
CHF 15.90
En stock  
+ −
BD-10 Separate Rear Suspension Mount Spacer (0.8mm (0.8mm 2pcs)
YOK-B10-30208A
entspricht: B10-30208
CHF 7.90
En stock  
+ −
YZ-2 Alu Center Link
YOK-Z2-201CL3A
entspricht: Z2-201CL3
CHF 22.90
En stock  
+ −
FCD Solid Axle Set (×1.8)
YOK-D-089
 
CHF 31.50
En stock  
+ −
Aluminum clamp type servo horn for YD-2ZX
YOK-Y2-204Z26A
Aluminum servo horn for YD-2ZX. It has a shape that matches the mounting method where the servo is placed directly on the main chassis, and is a type that is fixed with a clamp through an adapter that matches the servos of each company.
CHF 21.00
En stock  
+ −
Graphite Center Drive Shaft SD-9
YOK-SD-644WA
 
CHF 41.90
En stock  
+ −
Aluminium front bulkhead set YD2S/YD2Splus
YOK-Y2-302SA
CHF 62.90
En stock  
+ −
Aluminium Front Upper Mount YZ-4
YOK-Z4-300FU
 
CHF 27.90
En stock  
+ −
Graphite Separate Battery Holder
YOK-B12-118S
Lightweight graphite battery holder. Split front and rear sections allow the chassis to remain flexible for torsion. Spacers are included to adjust to the battery thickness.
CHF 20.90
En stock  
+ −
Front 3D Bumper for BD12/11
YOK-B12-001F3
This 3D printed bumper fits the BD12/11 series of competition touring cars and features a 3D-designed honeycomb structure for lightweight construction and minimal weight. The flexible material is made to be moderately strong and easily resists body deformation due to aerodynamic drag. It has...
CHF 20.90
En stock  
+ −
Aluminum Rear Shock Tower for YD-2S
YOK-Y2-018ARSA
Yokomo will release new Aluminum Shock Tower for YD-2S series which is a higher mount motor layout, 4 gear transmission RWD drift chassis kit. This new shock tower will perform the best freedom in super set with a rear short suspension arm which has also released just before. The...
CHF 49.90
En stock  
+ −
Verfügbarkeit
Verfügbar beim Lieferanten
Abmessungen
Auswahlhilfe
Material
Prix
CHF
–
CHF
  • CHF 1.5
  • CHF 849
Reifen/Rad-Typ
Servo-Typ
Verwendung
Massstab
Motor / Antrieb
Einsatz
Anspruch
Lackierung
Fertigungsgrad
Max. Geschwindigkeit
Marke
Betriebsspannung