Français (CH)
ERSATZTEIL-FINDER

Yokomo

Trier par:
Recommandé
Montrer:
48
Rod End Parts (20pcs·Gray) YZ-2DTM/YZ-4
YOK-Z2-206DMA
 
CHF 11.50
En stock  
+ −
Rear Upper Mount 6g weight YZ-2
YOK-Z2-300RW
CHF 9.50
En stock  
+ −
Ventilated Slipper OT Plate YZ-2/B-Max2
YOK-Z2-670VOP
 
CHF 16.50
En stock  
+ −
RP Ultra Rear spring (Purple) for YZ-2/2T/4
YOK-RP-089PUA
entspricht: RP-089PU
CHF 11.50
En stock  
+ −
YZ-4 Light weight body (with Masking sheet)
YOK-Z4-101LW
 
CHF 32.90
En stock  
+ −
Graphite rear shock tower
YOK-Z2-018
 
CHF 21.90
En stock  
+ −
Graphite Lower Brace YR-04
YOK-YR-04
CHF 32.90
En stock  
+ −
RTC Separate Suspensio Mount (A)
YOK-B9-RTC-04A
entspricht: B9-RTC-04
CHF 32.90
En stock  
+ −
Aluminum front upper bulkhead (A) BD11
YOK-B11-32FUAA
entspricht: B11-32FUA
CHF 32.90
En stock  
+ −
Aluminum front upper bulkhead (B) BD11
YOK-B11-32FUBA
entspricht: B11-32FUB
CHF 32.90
En stock  
+ −
Spool Drive Cup BD9/BD10
YOK-B9-501MCSA
(Steel made)
CHF 12.50
En stock  
+ −
High traction rear hub carrier weight
YOK-Y2-415RWA
A steel weight that can be attached directly to the rear hub carrier of the YD-2 series to increase rear traction. It is possible to effectively increase the rear grip by increasing the unsprung weight that directly applies the load to the tire without passing through a damper. The weight is...
CHF 32.90
En stock  
+ −
BD7 2016 Drive Pulley A
YOK-B7-67416
 
CHF 21.90
En stock  
+ −
HD f5.5mm Rod end ball (Screw 10mm long/4pcs) for
YOK-Z2-206-10A
entspricht: Z2-206-10
CHF 6.90
En stock  
+ −
Suspension Mount messing 44.2mm 13.1gr.
YOK-B7-3142BB
Brass -1mm lower suspension mount (44.2mm·13.1g)
CHF 21.90
En stock  
+ −
Suspension Mount messing 45.7mm 13.5gr.
YOK-B7-3157BB
Brass -1mm lower suspension mount (45.7mm·13.5g)
CHF 21.90
En stock  
+ −
Ceramic 1/8 Inch Differential Ball
YOK-R12-24C
CHF 11.90
En stock  
+ −
Suspension Mount messing 46.4mm 13.7gr.
YOK-B7-3164BB
Brass -1mm lower suspension mount (46.4mm·13.7g)
CHF 21.90
En stock  
+ −
COL Drive Cup for MO2.0
YOK-MO-303DCB
CHF 21.90
En stock  
+ −
Gear box cap/Diff hight adaptor/Spacer for YZ-2T
YOK-Z2-302CTA
entspricht: Z2-302CT
CHF 11.90
En stock  
+ −
Foward motor Conversion kit
YOK-B7-FMC
 
CHF 32.50
En stock  
+ −
Rear X Shock Set
YOK-BM-1L12
 
CHF 65.00
En stock  
+ −
8mm Rear wheel hub for YZ-2T
YOK-Z2-011R8TA
entspricht: Z2-011R8T
CHF 14.50
En stock  
+ −
40T Ring gear for Gear diff (use with S4-503D17)
YOK-S4-503R17A
entspricht: S4-503R17
CHF 32.50
En stock  
+ −
Aluminum Servo Mount for YD-2ZX (Black)
YOK-Y2-203ZA
Aluminum servo mount for YD-2ZX. It is compatible with low profile servos and has a height of approximately 17 mm. The color is black and comes in 2 pieces.
CHF 32.50
En stock  
+ −
Rear ”X33” Shock set for YZ-2 series
YOK-Z2-S1L2A
entspricht: Z2-S1L2
CHF 64.90
En stock  
+ −
Rear Short Suspension Arm Conv. Set BD7
YOK-B7-SACR
 
CHF 64.90
En stock  
+ −
Front Double Joint Universal Shaft (73mm)
YOK-MO-010FW
This is a front double-joint universal shaft for MO1.0/2.0. On high-grip surfaces, for example, the steering is often run at full steering angle, which places a heavy load on the universal shaft. In particular, when joints are operated at an angle, the viewpoint is spoiled and the risk of wear...
CHF 64.90
En stock  
+ −
Graphite Rear Suspension Arm (Damper Pivot 41.5mm)
YOK-BD-008RG2
 
CHF 12.90
En stock  
+ −
Gear Diff Drive Cup F/R/Center YZ4-SF
YOK-S4-503DCA
entspricht: S4-503DC
CHF 19.90
En stock  
+ −
Rear Short Suspension Arm Graphite
YOK-BD-008RS
 
CHF 12.90
En stock  
+ −
Steering Block ST Crunk ST Stopper YR-07
YOK-YR-07
 
CHF 12.90
En stock  
+ −
GReddy R35 Spec-D 1:10 Light Unit
YOK-SD-GR35LA
entspricht: SD-GR35L
CHF 9.90
En stock  
+ −
Suspension Mount messing 43.5mm 12.9gr.
YOK-B7-3135BB
 
CHF 21.50
En stock  
+ −
Shock Cap Nut engraved mark BD8
YOK-B8-S4C
 
CHF 21.50
En stock  
+ −
Rear ESC mount for YD-2 series
YOK-Y2-REM-RA
A ESC mount set that can change the weight balance of the chassis by mounting the ESC on the rear overhang and greatly enhance the rear traction. Especially effective on roads with low grip, the load applied to the rear tires at the corner exit is overwhelming! It is possible to get a...
CHF 42.90
En stock  
+ −
Alu Steering Bell Clunk for DTM2
YOK-Z2-201DSB
CHF 64.50
En stock  
+ −
YZ-2 Alu Upper Mount wide
YOK-Z2-30RUMWA
entspricht: Z2-30RUMW
CHF 21.50
En stock  
+ −
Front bulkhead / Upper arm holder
YOK-Y2-302ZDA
entspricht: Y2-302ZD
CHF 21.50
En stock  
+ −
Stabilizer Set (f1.0~f1.6mm)
YOK-BD-412W
CHF 14.20
En stock  
+ −
YOKOMO Parts Case 255X190X40mm
YOK-YC-15
A new lineup of parts cases with the Yokomo logo has been added to the series. The three new cases are suitable for storing relatively small parts, and feature a large number of movable dividers that can be positioned in a variety of ways. The body is made of polypropylene, which is...
CHF 21.50
En stock  
+ −
Graphite battery holder for MR/RS rear motor
YOK-B2-118RA
 
CHF 31.90
En stock  
+ −
HG Radial Tire Type T 4stk. 24mm
YOK-ZR-R03T
 
Auswahlhilfe190mm Touring MaterialGummi Reifen/Rad-TypReifen Massstab1:10 EinsatzOn-Road
CHF 15.90
En stock  
+ −
Graphite Front Shock Tower SO3.0
YOK-SO-017
CHF 15.90
En stock  
+ −
BD-10 Separate Rear Suspension Mount Spacer (0.8mm (0.8mm 2pcs)
YOK-B10-30208A
entspricht: B10-30208
CHF 7.90
En stock  
+ −
F4mm Spacer shimm (0.05mm·0.1mm·0.2mm)
YOK-ZC-S40SA
entspricht: ZC-S40S
CHF 6.90
En stock  
+ −
FCD Solid Axle Set (×1.8)
YOK-D-089
 
CHF 31.50
En stock  
+ −
Aluminum clamp type servo horn for YD-2ZX
YOK-Y2-204Z26A
Aluminum servo horn for YD-2ZX. It has a shape that matches the mounting method where the servo is placed directly on the main chassis, and is a type that is fixed with a clamp through an adapter that matches the servos of each company.
CHF 21.00
En stock  
+ −
Verfügbarkeit
Verfügbar beim Lieferanten
Abmessungen
Auswahlhilfe
Material
Prix
CHF
–
CHF
  • CHF 1.5
  • CHF 949
Reifen/Rad-Typ
Servo-Typ
Verwendung
Massstab
Motor / Antrieb
Einsatz
Anspruch
Lackierung
Fertigungsgrad
Max. Geschwindigkeit
Marke
Betriebsspannung
Effacer