Français (CH)
ERSATZTEIL-FINDER

Yokomo

Recommandés
48 Par page
Alu Servo Mount Set YZ-2
YOK-Z2-203AA
entspricht: Z2-203A
CHF 29.90
En stock  
+ −
High Precision Cutting Titanium Screw Set SO3.0
YOK-RP-118
This titanium screw set is designed to fit the SO3.0 chassis configuration. The set includes 106 screws for one car.
CHF 145.90
En stock  
+ −
Alu main Chassis hard anodized YZ4-SF
YOK-S4-002SA
entspricht: S4-002S
CHF 95.00
En stock  
+ −
Aluminum Chassis SO3.0
YOK-SO-002
CHF 94.90
En stock  
+ −
Heavy Duty Gokuraku OR Wing narrow
YOK-ZS-GWBNHA
entspricht: ZS-GWBNH
CHF 14.90
En stock  
+ −
Slide Rack Set (Center Clank) for RD2.0
YOK-RD-202SC
This slide rack set can be bolted on to the RD2.0.The servo can be mounted closer to the rear via the center crank, increasing the rear load and stability.
CHF 134.90
En stock  
+ −
Alu adjustable rear short H arm for YD-2 (Red)
YOK-Y2-R08RASA
entspricht: Y2-R08RAS
CHF 99.90
En stock  
+ −
Karosserie Mercury Sayaka Spl. S15 Drift 1:10 klar
YOK-SD-MS15B
The MERCURY SAYAKA SPECIAL S15 driven by popular ladies driver Sayaka Shimoda is now available as a body for drifting! The wide form with powerful over fenders and the GT wing with aluminum stays create a racing atmosphere
MaterialLexan Auswahlhilfe190mm Touring Massstab1:10 EinsatzOn-Road Drift Lackierungunlackiert
CHF 89.90
En stock  
+ −
BL-RPX2 Competition ESC (Purple) for Drift
YOK-BL-RPX2DP
VerwendungRC Auto Motor / AntriebElektro Brushless-Motor HerstellerYokomo
CHF 259.90
En stock  
+ −
BL-RPX2 Competition ESC (Red) for Drift
YOK-BL-RPX2DR
VerwendungRC Auto Motor / AntriebElektro Brushless-Motor HerstellerYokomo
CHF 259.90
En stock  
+ −
Team Yokomo Rookie Drift RD2.0 inkl. V2 Gyro
YOK-RDR-020G
The "Rookie Drift RD2.0" is a new basic machine released by Yokomo, a pioneer in the field of drift R/C racing. The base specs have been enhanced by improving the steering angle and securing rear grip, etc., so that even first-time drifters can enjoy this machine. The chassis configuration...
Massstab1:10 Motor / AntriebElektro Brushless-Motor EinsatzOn-Road Drift AnspruchAnfänger/Einsteiger FertigungsgradBausatz
CHF 229.90
En stock  
+ −
Aluminum Gear Differential Case (with 38T pulley)
YOK-MS-503GHA
Used in place of the standard plastic gear diff case, this aluminum diff case increases diff oil heat dissipation and stabilizes operating effectiveness. Especially during the summer season, it can prevent oversteer due to low differential oil viscosity and stabilize lap times. The pulley part is...
CHF 64.90
En stock  
+ −
Alu Rear Susp. Mount Spacer Set (for rear side)
YOK-Z4-300RRS
 
CHF 18.50
En stock  
+ −
Aluminum adjustable rear H arm kit for YD-2/YD-4
YOK-Y2-008RAA
This all new rear H arm has made by aluminum with our original high precision processing to enable the driver to make an adjustment for chassis tread for finding out the best chassis balance and also suites for the variety of car bodies width as well.   Adjustable length for each...
CHF 95.00
En stock  
+ −
Yokomo Pit Bag S
YOK-YT-30
This pit bag conveniently stores your drift or speed car, transmitter, charger, and parts in one place. It features a handle and an adjustable shoulder strap for easy carrying, and its compact size makes transporting it to the circuit easy. It is made from thick nylon fabric with sturdy...
CHF 129.00
En stock  
+ −
Pitching Control System BD8
YOK-B8-PCS
Yokomo are continually evolving the World Championship winning BD8 Platform
CHF 84.90
En stock  
+ −
HD f5.5mm Ball end cap for YZ-2/YZ-4
YOK-Z2-206DM2A
entspricht: Z2-206DM2
CHF 9.90
En stock  
+ −
Brass Motor Mount for BD10
YOK-B10-302MBA
The new brass motor mount will increase the weight by 34g compare to the original aluminum unit. It will help to meet race ready weight regulations without upsetting the left/right balance weight distribution by centering the weight at the middle of the chassis.
CHF 84.90
En stock  
+ −
Aluminium Suspension Mount Set für RS1.0/RS2.0
YOK-RS-301AS
This aluminum suspension mount is commonly used for the RS series. The rear mount is basically designed to have the same width as the standard one, but the rear rear suspension toe angle can be changed by interchanging the two types of bushings. The kit standard (3 degree) bushing is the center...
CHF 84.90
En stock  
+ −
Aluminum cramp servo horn 17mm (for FUTABA)
YOK-ZC-204517A
entspricht: ZC-204517
CHF 17.90
En stock  
+ −
Alu Main Chassis BD8
YOK-B8-002A
 
CHF 125.90
En stock  
+ −
Karosserie Toyo S15 Silvia klar
YOK-SD-TY15BB
MaterialLexan Auswahlhilfe190mm Touring Massstab1:10 EinsatzOn-Road Drift Lackierungunlackiert
CHF 62.90
En stock  
+ −
Rear ESC Mount for YD-2 series
YOK-Y2-REMA
Please be informed that Introducing new ESC Rear mount option for our YD-2 series drift chassis. The final design is a result of extensive field testing by Team Yokomo drivers. It has the best balance between mounting position and weight distribution/transfer. The new option is a 2 piece...
CHF 42.90
En stock  
+ −
Team Yokomo Rookie Off-Road 2WD Buggy 1:10 Bausatz
YOK-ROR-010
We are pleased to announce the release of the new RO1.0 chassis kit, ideal for beginners and intermediate off-road racers. The kit is reasonably priced and comes with pre-assembled dampers, turnbuckle tie rods, etc., as well as a pre-cut body for easy assembly. The body is also pre-cut for...
Massstab1:10 Motor / AntriebElektro Bürstenmotor, Elektro Brushless-Motor EinsatzOff-Road AnspruchAnfänger/Einsteiger FertigungsgradBausatz
CHF 249.90
En stock  
+ −
Optional parts set for YD-2 series Upgrade 4
YOK-Y2-OP4A
By increasing the rigidity of the shock tower, the suspension will move even better. Considering the lightweight finish on the front side, we chose a graphite hybrid shock tower and a lightweight integrated bulkhead.
CHF 124.90
En stock  
+ −
YC-1134 Parts Case Set
YOK-YC-1134A
Parts Case Set 255x190x60mm
CHF 28.90
En stock  
+ −
Aluminum Main Chassis U.S. Version BD11
YOK-B11-002AU
BD11US specification aluminum main chassis. By not removing meat, it increases rigidity, promotes a low center of gravity, and is suitable for high-grip road surfaces.
CHF 124.90
En stock  
+ −
Main Drive Shaft graphite YD-4
YOK-Y4-644G
 
CHF 41.50
En stock  
+ −
Aluminum ball diff kit for YD-2 series
YOK-Y2-500AA
entspricht: Y2-500A
CHF 34.90
En stock  
+ −
Competition Brushless ESC RPX4
YOK-BL-RPX4
The ultimate speed controller, which exceeds the power of the RPX2 and the ease of handling of the RPX3, is now available in an updated version! The state-of-the-art power MOS FETs have been rigorously tested in racing environments. It maximises the performance of stock motors and allows the...
CHF 249.00
En stock  
+ −
Aluminum rear hub carrier for YZ-4SF2
YOK-S4-415RS2A
Aluminum rear hub carrier compatible with the sturdy F3mm outer suspension arm pin. Four types of bushes for passing suspension pin are attached, and the height can be adjusted in 7 steps by switching the height. Also, it also has the effect of increasing rear traction due to rise of...
CHF 82.90
En stock  
+ −
Alu Rear Brace with Cooling Fan YD-2
YOK-Y2-303RBFA
entspricht: Y2-303RBF
CHF 54.90
En stock  
+ −
Alu front upper A arm holder rear YD4
YOK-Y4-302UR
 
CHF 34.90
En stock  
+ −
Aluminum Adj. Suspension Mount Set Purple RD2.0
YOK-RD-301ASP
CHF 79.90
En stock  
+ −
Universal Shaft 68mm Bone DTM2
YOK-Z2-01068A
entspricht: Z2-01068
CHF 34.90
En stock  
+ −
Aluminum Lower Bulkhead Set RS1.0/RS2.0
YOK-RS-32ALS
Aluminum lower bulkhead for RS1.0/2.0. It is anodized in blue, the optional image color of the RS series, and is very effective in improving the looks of the machine. Can be combined with optional stabilizer.
CHF 79.90
En stock  
+ −
BN Sports Toyota JZX100 Mark2 Body Set
YOK-SD-JZXBNB
The JZX100 Mark II, the most popular 4-door body, will be released as a new body for drifting. Moreover, the body is designed with BN Sports aero that brings out the power of a drift machine, and the one-piece molded body is easy to build and has a great silhouette. The all-in-one body also comes...
MaterialLexan Auswahlhilfe190mm Touring Massstab1:10 EinsatzOn-Road Drift Lackierungunlackiert
CHF 79.90
En stock  
+ −
YZ-2 F2 light-Weight Body (with Masking)
YOK-Z2-DTMWBA
entspricht: Z2-DTMWB
MaterialLexan AuswahlhilfeBuggy Massstab1:10 EinsatzOff-Road Lackierungunlackiert
CHF 24.90
En stock  
+ −
Aluminum Rear Hub Carrier Black für RD2.0/SD3.0
YOK-RD-415AR
Aluminum rear hub carrier for RD/SD series. It is more rigid than the standard plastic one, and improves rear traction and slide control. Upper arm fixing positions allow for more precise adjustment of camber change due to suspension stroke. The lower suspension arm pins can also be selected from...
CHF 59.90
En stock  
+ −
Drift Package 2WD Pandem GR86 Kit (White)
YOK-DP-GR86W
This is a kit with pre-painted body of the Drift Package 2WD based on the RD2.0. By pre-painting and cutting the body, which can be difficult for beginners, the kit production time and effort is greatly reduced, allowing you to enjoy the fun of chassis assembly while also making it easier to...
CHF 239.00
En stock  
+ −
Alu Steering Hub Carrier YZ-2
YOK-Z2-413A
 
CHF 59.90
En stock  
+ −
Drift Package 2WD Pandem GR Supra Kit (Red)
YOK-DP-GRA90R
This is a kit with pre-painted body of the Drift Package 2WD based on the RD2.0. By pre-painting and cutting the body, which can be difficult for beginners, the kit production time and effort is greatly reduced, allowing you to enjoy the fun of chassis assembly while also making it easier to...
CHF 239.00
En stock  
+ −
Graphite Main Chassis YD-4
YOK-Y4-002
 
CHF 119.00
En stock  
+ −
Front Double Joint Universal Driveshaft BD9/BD10
YOK-B9-010FWA
entspricht: B9-010FW
CHF 59.90
En stock  
+ −
Aluminium Chassis Platte 1.5mm MS2.0
YOK-MS-002A-2
This main chassis for the MS2.0 uses slightly thinner 1.5mm aluminum material, achieving a low center of gravity and easy handling. It is ideal for high-grip surfaces like carpet, where its moderate flexibility enhances traction to propel the machine forward. When securing parts to the chassis,...
CHF 119.00
En stock  
+ −
BD8/BD7'16 Rear Toe Control system kit (ARS)
YOK-B8-RTC
CHF 57.90
En stock  
+ −
Yokomo Transmitter Bag V2
YOK-YT-27TB2A
Yokomo's new propo bag has been redesigned! The design has been changed to the Racing Factory logo, and it is a propo bag with cushioning to protect your precious radio from shocks when traveling to the RC circuit. The image of the bag is the same as that of the pit bag, and the total...
CHF 55.90
En stock  
+ −
YD-2Z Front Upgrade Set schwarz
YOK-Y2-FUSBA
A new parts set to easily upgrade your YD-2Z chassis! This upgrade set balances front end weight reduction with increased precision and sharp looks at a very competitive price. The front shock towers have aluminum upper arm holders for high precision, and graphite shock mountings for...
CHF 115.00
En stock  
+ −
Verfügbarkeit
Verfügbar beim Lieferanten
Abmessungen
Auswahlhilfe
Material
Prix
CHF
–
CHF
  • CHF 1.5
  • CHF 849
Reifen/Rad-Typ
Servo-Typ
Verwendung
Massstab
Motor / Antrieb
Einsatz
Anspruch
Lackierung
Fertigungsgrad
Max. Geschwindigkeit
Marke
Betriebsspannung