Français (CH)
ERSATZTEIL-FINDER

Yokomo

Recommandés
48 Par page
Front upper arm mount ”S” (Standard) for YZ-2 seri
YOK-Z2-300FUSA
entspricht: Z2-300FUS
CHF 25.90
En stock  
+ −
YD-4 MR Conversion kit
YOK-DP-YD4MRC
*** Nur Umbausatz. Sie benötigen ein normales YD-4, um dieses zu YD-4 MR Spec zu konvertieren. ***
Massstab1:10 Motor / AntriebElektro Brushless-Motor EinsatzOn-Road Drift AnspruchAnfänger/Einsteiger FertigungsgradBausatz
CHF 225.00
En stock  
+ −
Alu Offset Rear Hub Carrier 0 degree Set YZ4/Z2ca
YOK-Z2-415RS
This is intended for the variable set up for upper arm by replacement for several kind of track surface.
CHF 89.90
En stock  
+ −
Differenzialgehäuse mit 42T Pulley MS2.0
YOK-MS-503GH-2
CHF 74.90
En stock  
+ −
Sway Bar Set RS2.0 (Only Aluminum Bulkhead)
YOK-RS-412AS
These stabilizers can be mounted on RS2.0 aluminum lower bulkheads. The set comes with three different bars, front and rear, each with ball bearing support for smooth operation and increased stabilizing effect.
CHF 55.90
En stock  
+ −
Ceramic Kugellager 10x15x4mm 2stk.
YOK-BB-1510CBA
entspricht: BB-1510CB
CHF 16.90
En stock  
+ −
Alu Front upper A arm holder legt YD-4
YOK-Y4-302UHL
 
CHF 31.90
En stock  
+ −
Alu Front upper A arm holder right YD-4
YOK-Y4-302UHR
 
CHF 31.90
En stock  
+ −
Type B, Front suspension arm
YOK-Z2-008F3A
F3 Outer pin spec
CHF 11.00
En stock  
+ −
BD7-2016 High Traction Graphite Main Chassis
YOK-B7-00216S
High Traction Graphite Main Chassis (Increase Traction)
CHF 109.90
En stock  
+ −
Graphite main chassis (Hard) for BD9
YOK-B9-00219H
A new hard main chassis for the BD9 is now available!
CHF 109.90
En stock  
+ −
Drift competition tire for carpet/P-tile DRC 4stk.
YOK-ZR-DRCA
For Carpet/Polished Tile These HDPE tires have a flatter surface compared to the asphalt variant. By increasing the contact patch these tires let you drift on carpet/polished tile with an increased sense of grip and driving performance
Auswahlhilfe190mm Touring, 200mm Touring MaterialDrift Reifen/Rad-TypReifen Massstab1:10 EinsatzOn-Road Drift
CHF 11.00
En stock  
+ −
Optional parts set for YD-2 series Upgrade 2
YOK-Y2-OP2A
Axles and bearings that lightly finish the rotation of the tire. It is possible to prevent spin by improving the running of the front. In addition, the variable kingpin angle steering block provides optimal wheel alignment for drift driving.
CHF 109.90
En stock  
+ −
Upper Arm Mount Rear YZ-4
YOK-Z4-300RU
 
CHF 9.90
En stock  
+ −
Front Lower Short A Arm YD2 YD4
YOK-Y2-008FSCA
Yokomo will release a new optional parts [Front lower short A arm] for more freedom on counter steering for existing customer who enjoy AWD and RWD drifting with YD-4 & YD-2 series in the end of this month, May 31st. Short Suspension Arm will be a kind of highlight at all the option...
CHF 64.90
En stock  
+ −
Front Suspension Arm (Graphite)Flat +1? long YZ-4
YOK-Z4-008F1
 
CHF 13.50
En stock  
+ −
Rear Belt 103T YZ-4
YOK-Z4-309-8
CHF 17.90
En stock  
+ −
Alu 15.5mm clamp Servo Horn 25T Futaba
YOK-Z2-20425A
entspricht: Z2-20425
CHF 16.90
En stock  
+ −
Hard main chassis (Short type)
YOK-Z2-002DA
For Dirt track
CHF 105.00
En stock  
+ −
Alu Conversion Kit für Yokomo SD
HSH-YOK-ALUCONV
Alu Conversion Kit für Yokomo SD Aluminium blau, inkl. Kugellager
CHF 69.90
En stock  
+ −
"Teams" Light weight FLEX Chassis Set für YD-2
YOK-Y2-002TSA
Team Yokomo's competition drift brand, Teams, is proud to announce the release of the new light weight flex chassis set for the YD-2 series. The lightweight graphite main chassis plate and special lightweight battery holder provide the right amount of rigidity and traction for a more...
CHF 209.00
En stock  
+ −
Alu adjustable steering bell crunk set for YD-2
YOK-Y2-202VA
It is a variable aluminum steering bell crank that can be used in common with the YD - 2 series. Corresponding to the wide tread of the front which is the mainstream of recent RWD drift, we set the width of the tie rod pivot part of the center link right and left, and widely set the...
CHF 99.90
En stock  
+ −
Motor Mount
YOK-B9-302MA
entspricht: B9-302M
CHF 49.50
En stock  
+ −
RTC Separate Suspension mount (B)
YOK-B9-RTC-05A
entspricht: B9-RTC-05
CHF 32.90
En stock  
+ −
Plastic Bevel Gear Dif Assy (with Aluminum Drive c
YOK-Y2-500GSAA
entspricht: Y2-500GSA
CHF 49.90
Rupture de stock
BD10F Front balance weight L / R 40g
YOK-B10-BWF40A
A front balance weight that enhances the traction of the BD10F. A total weight increase of 80g can be achieved with 40g each on the left and right, reducing wheel spin that tends to occur during acceleration. The acceleration from the corner will be improved and the time will be improved. By...
CHF 65.00
En stock  
+ −
Front double-joint universal BD11
YOK-B11-010FWA
entspricht: B11-010FW
CHF 64.90
En stock  
+ −
YZ-2 Alu Bell Crank Base
YOK-Z2-201BB3A
entspricht: Z2-201BB3
CHF 21.50
En stock  
+ −
Alu Front upper A Arm YD-4
YOK-Y4-008FUC
 
CHF 47.90
En stock  
+ −
Aluminum main chassis for YZ-2T
YOK-Z2-002TA
entspricht: Z2-002T
CHF 95.00
En stock  
+ −
Carbon Graphite Main Chassis
YOK-B9-00219
CHF 95.00
En stock  
+ −
Lexanschere / Lexan Schere
YOK-YT-CS2A
entspricht: YT-CS2
CHF 15.90
En stock  
+ −
Narrow Graphite Main Chassis Set für YD-2R inline
YOK-Y2-002RXVA
This graphite chassis set is designed to further fine tune the YD-2R series for high rear traction. The overall silhouette has been slimmed down and rebalanced for rigidity, and the chassis has also been lightened for a more supple chassis twist. The roll motion softens the load on the...
CHF 189.90
En stock  
+ −
Alu main Chassis (Midship) YZ CAL2 / DTM2S
YOK-Z2-0023
CHF 94.90
En stock  
+ −
Gear Diff. Case (High capacity) CAL2
YOK-Z2-503GH2A
entspricht: Z2-503GH2
CHF 11.50
En stock  
+ −
Front HD Double Joint Univ. Shaft
YOK-B7-010FW
 
CHF 62.90
En stock  
+ −
Lexanschere / Lexan Schere 160mm
YOK-YT-CS1A
Lexanschere Fluorine processing Scissor 160mm
CHF 16.90
En stock  
+ −
Karosserie Toyo S15 Silvia klar
YOK-SD-TY15BB
MaterialLexan Auswahlhilfe190mm Touring Massstab1:10 EinsatzOn-Road Drift Lackierungunlackiert
CHF 62.90
En stock  
+ −
Alum. Short Shock Conversion Set for RS1.0
YOK-RS-SSC
New Short Shock Conversion Kit is now available to further improve the performance of the RookieSpeed RS1.0 to racing specs. This set of carbon shock towers and aluminum short shocks provide a sharp ride with minimal roll. The shock length has been shortened by more than 7mm to achieve an...
CHF 94.10
En stock  
+ −
“X30” 13 shock set (front)
YOK-S4-S1S13
This is a F13mm big bore shock set. The S size is ideal for the front of the SO/MO series, and the shaft diameter is 3.0mm.
CHF 62.90
En stock  
+ −
Graphite molded S3/LD rear sus-arm YZ2-DTM/CAL
YOK-Z2-008R3GA
For YZ-2 DTM/CAL 3/3.1
CHF 16.90
En stock  
+ −
Graphite Rear Shock Tower YD-4
YOK-Y4-018
 
CHF 22.90
En stock  
+ −
Karosserie Extrem PS13 SILVIA 1:10
YOK-SD-PS13BA
entspricht: SD-PS13B
MaterialLexan Auswahlhilfe190mm Touring Massstab1:10 EinsatzOn-Road Drift Lackierungunlackiert
CHF 46.90
En stock  
+ −
Main Chassis YZ-2
YOK-Z2-002
 
CHF 89.90
En stock  
+ −
Aluminum main chassis for BD10
YOK-B10-002AA
Aluminum main chassis for BD10. It is heavier than graphite and can lower its center of gravity. It is especially effective for high grip situations such as carpet surfaces.
CHF 124.90
En stock  
+ −
SLF Aluminum Big Bore shock set for YD-2
YOK-Y2-SBBSA
Super low friction aluminum big bore shock set for YD-2. The cylinder diameter is wider than the conventional shock, and the shock length is also newly designed for drifting. The maximum capacity for on-road shocks enhances the sense of stability. The cylinder is also treated with Kashima Coat...
CHF 89.90
En stock  
+ −
Rear C Clip Universal BD9/BD10
YOK-B9-010RAA
(44.5mm Aluminum bone)
CHF 49.90
En stock  
+ −
SLF Aluminum Big Bore shock set (Purple) for YD-2
YOK-Y2-SBBSPA
Super low friction aluminum big bore shock set for YD-2. The cylinder diameter is wider than the conventional shock, and the shock length is also newly designed for drifting. The maximum capacity for on-road shocks enhances the sense of stability. The cylinder is also treated with Kashima Coat...
CHF 89.90
En stock  
+ −
Verfügbarkeit
Verfügbar beim Lieferanten
Abmessungen
Auswahlhilfe
Material
Prix
CHF
–
CHF
  • CHF 1.5
  • CHF 849
Reifen/Rad-Typ
Servo-Typ
Verwendung
Massstab
Motor / Antrieb
Einsatz
Anspruch
Lackierung
Fertigungsgrad
Max. Geschwindigkeit
Marke
Betriebsspannung