ERSATZTEIL-FINDER

Yokomo

Trier par:
Recommandé
48
Front stabiliser wire (F 1.1 mm) BD11
YOK-B11-412F1A
entspricht: B11-412F1
CHF8.90
En stock  
+ −
Front stabiliser wire (F1.2 mm) BD11
YOK-B11-412F2A
entspricht: B11-412F2
CHF8.90
En stock  
+ −
Front stabiliser wire (F1.3 mm) BD11
YOK-B11-412F3A
entspricht: B11-412F3
CHF8.90
En stock  
+ −
Aluminium stabiliser mount (A) BD11
YOK-B11-412MAA
entspricht: B11-412MA
CHF11.90
En stock  
+ −
Aluminium stabiliser mount (B) BD11
YOK-B11-412MBA
entspricht: B11-412MB
CHF11.90
En stock  
+ −
Stabiliser wire (F1.1 mm) BD11
YOK-B11-412R1A
entspricht: B11-412R1
CHF8.90
En stock  
+ −
Stabiliser wire (F1.2 mm) BD11
YOK-B11-412R2A
entspricht: B11-412R2
CHF8.90
En stock  
+ −
Stabiliser wire (F1.3 mm) BD11
YOK-B11-412R3A
entspricht: B11-412R3
CHF8.90
En stock  
+ −
F5mm suspension ball (4 pieces) BD11
YOK-B11-B50A
entspricht: B11-B50
CHF8.90
En stock  
+ −
RTC steering block arm plate BD11
YOK-B11-RTC-5A
entspricht: B11-RTC-5
CHF11.90
En stock  
+ −
Shock shaft guide (4 pieces) BD11
YOK-B11-S2BA
entspricht: B11-S2B
CHF11.90
En stock  
+ −
Shock adjust nut / O-ring (2 pieces) BD11
YOK-B11-S4CA
entspricht: B11-S4C
CHF12.90
En stock  
+ −
Optional parts set for BD11 Upgrade 2
YOK-B11-OP2A
entspricht: B11-OP2
CHF32.90
En stock  
+ −
Silver solder (15g with silver)
YOK-YT-SS2A
Yokomo's Silver Solder (solder line) has been renewed! It is a high quality 0.8mm solder wire with resin and has an internal capacity of 15g. Silver-coated silicon cords are often used for radio-controlled car wiring, but if normal solder is used, the silver component will dissolve into the...
CHF8.90
En stock  
+ −
BD11 decal sheet
YOK-ZC-BD11-1A
A decal sheet with the BD11 and Yokomo logos. It's perfect for dressing up your machine, and sticking it on your body will increase your attachment to the machine.
CHF8.90
En stock  
+ −
Graphite molded Front sus-arm for YZ-4SF2
YOK-S4-008F2GA
entspricht: S4-008F2G
CHF15.90
En stock  
+ −
Stabiliser Wire BD11 front 1.4mm
YOK-B11-412F4A
F1.4mm is added as a variation of the sway bar wire for BD11. This wire is one rank stiffer than the previous lineup and is mainly used to limit roll on high-grip surfaces. Compared to BD10, BD11 has a lower lever ratio and is more compatible with softer springs. However, on...
CHF9.90
En stock  
+ −
Stabiliser wire BD11 hinten 1.4mm
YOK-B11-412R4A
CHF9.90
En stock  
+ −
Rear short "X30" shock body for YZ-2DTM3 / CAL3
YOK-S4-S4MA
A shock body that can be used on the rear of the YZ-2DTM3 / CAL3 and the front of the YZ-2T. 1 bottle included.
CHF14.50
En stock  
+ −
Body Mount Patch 6x0.5mm
YOK-ZR-BMP6B
entspricht: ZR-BMP6A
CHF7.50
En stock  
+ −
Programmierbox für RPX3 ESC
YOK-BL-R26P3
A dedicated programmer is required to change the RPX3 program. We plan to distribute firmware to update the old programmer (BL-R26P), but you will need to revert to the old firmware (to be distributed) to change the program of the old ESC after the update.
CHF38.90
En stock  
+ −
Receiver Capacitor (non-polarized)
YOK-BL-RRCP
This capacitor is connected to the BEC channel of the receiver to reduce noise and stabilize the servo current. When a large load is placed on the servo during driving, the capacitor can momentarily supplement power to stabilize the servo's operation. Since it is non-polarized, it...
CHF17.90
En stock  
+ −
Big Bore Stossdämpfer Diaphragms 4stk. silicon
YOK-YS-8DS
CHF4.90
En stock  
+ −
High Grade O-Ring (oil resistant blue, 8stk.)
YOK-YS-7HG2
CHF8.90
En stock  
+ −
Progressive Federn 1.80 bis 2.10 20mm
YOK-B10-SSP18
This new spring matches the BD11 with a lower lever ratio than before. The overall setting is softer, making it a perfect match for the BD11's long suspension arms. You can find a good balance by choosing from this lineup for both front and rear. The progressive type spring has a pitch change...
CHF12.90
En stock  
+ −
Progressive Federn BD11 1.90-2.20 20mm
YOK-B10-SSP19
This new spring matches the BD11 with a lower lever ratio than before. The overall setting is softer, making it a perfect match for the BD11's long suspension arms. You can find a good balance by choosing from this lineup for both front and rear. The progressive type spring has a pitch change...
CHF12.90
En stock  
+ −
Progressive Federn BD11 2.10 bis 2.40 20mm
YOK-B10-SSP21
CHF12.90
En stock  
+ −
Yokomo Factory Jacke XL
YOK-ZC-J27XLA
A windproof jacket with the Yokomo Racing Factory logo on the chest and back. Light nylon fabric, perfect for changing seasons. It has a slightly larger size.
CHF37.90
En stock  
+ −
Yokomo Factory Jacke L
YOK-ZC-J27LA
entspricht: ZC-J27L
CHF37.90
En stock  
+ −
Rear hub carrier link mount für S4-415RS
YOK-S4-415RLA
entspricht: S4-415RL
CHF14.90
En stock  
+ −
Rear short shock shaft for YZ-2DTM3/CAL3
YOK-S4-S2MA
entspricht: S4-S2M
CHF9.50
En stock  
+ −
Inline Battery holder conversion für MD1.0
YOK-MD-CONV
This is a battery holder conversion to change the battery mounting of MD1.0 to inline mounting. When the car has a certain degree of grip, mounting the battery inline (in the front-back direction of the chassis) suppresses chassis roll, enabling sharper movement when transitioning to an...
CHF43.90
En stock  
+ −
4 gear transmission conversion MD1.0
YOK-MD-CON4
The standard MD1.0 transmission has 3 gears and positive torque, but by adding a counter gear and reconfiguring it, this conversion set can be used with 4 gears and anti-torque specifications. Compared to a 3-gear transmission, the additional gear increases drive loss, but the...
CHF37.90
En stock  
+ −
YZ-2CAL3.1/DTM3.1 Side plate (graphite molding)
YOK-Z2-002SG
Side plate for YZ-2CAL3.1/DTM3.1. Graphite-mixed resin is used to increase rigidity and improve steering response, especially on high-grip surfaces. In particular, pitching rigidity is increased, enabling the driver to gain a sense of stability from corner entry to clipping
CHF14.90
En stock  
+ −
Rear Upper Mount/Roll Bar Holder/Gear Box
YOK-Z2-300RG
This is a set of resin parts around the rear for YZ-2CAL3.1/DTM3.1/Rear Upper Mount, Roll Bar Holder, and Gear Box Support. Graphite-mixed resin is used to increase rigidity, which is effective in gaining rear stability when turning and improving traction when accelerating.
CHF14.50
En stock  
+ −
Side plate/battery post/antenna mount for YZ-4SF2
YOK-S4-002SPG
These graphite-mixed resin molded side plates can increase the rigidity of the YZ-4SF2 chassis. It is especially effective when driving on high grip surfaces, and improves stability when entering a corner, enabling cornering with good steering response. It is effective not only on...
CHF19.50
En stock  
+ −
Rear Belt Tensioner BD11
YOK-B11-RBTS
Rear belt tensioner set for BD11. It is an effective part especially when a high-power motor is installed, and it is possible to suppress tooth jumping of the rear belt, improve drive efficiency, and make the belt itself last longer. European team drivers who participate in the ETS always wear...
CHF16.90
En stock  
+ −
USB Program adaptor SP-02D/03D servo
YOK-SP-USBP
This is a program adapter to easily rewrite the performance of programmable servos for drifting such as SP-02D/03D, etc. Save the application on your PC, start it up, and connect it to the PC's Plug the adapter into the PC's USB connector and connect the servo connector. Power, torque,...
CHF33.90
En stock  
+ −
Aluminum turnbuckle set for MD1.0
YOK-MD-TBS
This set converts the turnbuckles used in the MD series upper arms and tie rods to aluminum. 20mm/27mm/33mm turnbuckles are included, to reduce weight and improve suspension response.
CHF21.50
En stock  
+ −
YOKOMO Parts Case 86X103X34mm
YOK-YC-13
new lineup of parts cases with the Yokomo logo has been added to the series. The three new cases are suitable for storing relatively small parts, and feature a large number of movable dividers that can be positioned in a variety of ways. The body is made of polypropylene, which is...
CHF8.90
En stock  
+ −
YOKOMO Parts Case 205X145X40mm
YOK-YC-14
A new lineup of parts cases with the Yokomo logo has been added to the series. The three new cases are suitable for storing relatively small parts, and feature a large number of movable dividers that can be positioned in a variety of ways. The body is made of polypropylene, which is...
CHF13.90
En stock  
+ −
BD-919/BD10/BD10LC AXON super hub axle pin/"O" rin
YOK-B10-WHAS2A
entspricht: B10-WHAS2
CHF4.50
En stock  
+ −
Graphite front body mount stay for MD1.0
YOK-MD-016MG
CHF34.90
En stock  
+ −
Alu high mount Battery Post (R)
YOK-Y2-118RL
CHF23.90
En stock  
+ −
Alu hight mount battery post (F)
YOK-Y2-118FL
CHF16.90
En stock  
+ −
Drift LTS Front Spring 0.9x45x8.5turns
YOK-D-186
CHF11.50
En stock  
+ −
Drift LTS Front Spring 1.0×48mm×9.0turns
YOK-D-187
CHF11.90
En stock  
+ −
Drift LTS Rear Spring 1.0×48mm×10.0turns
YOK-D-188
CHF11.90
En stock  
+ −
Verfügbarkeit
Verfügbar beim Lieferanten
Abmessungen
Auswahlhilfe
Material
Prix

CHF  –  CHF

  • ‎CHF1.5
  • ‎CHF949
Reifen/Rad-Typ
Servo-Typ
Verwendung
Massstab
Motor / Antrieb
Einsatz
Anspruch
Lackierung
Fertigungsgrad
Max. Geschwindigkeit
Marke
Betriebsspannung
Effacer