Français (CH)
ERSATZTEIL-FINDER

Yokomo

Recommandés
48 Par page
Teams Alu Achsschenkel hinten 3teilig für YD2
YOK-Y2-415ART
This aluminum rear hub carrier can be used commonly with the YD-2 series. The universal shaft with a short axle shaft for narrow scrubs is used, and the universal joint pin is positioned as far outward as possible, closer to the outer suspension arm pin, to activate the suspension movement and...
CHF 89.90
En stock  
+ −
Graphite molded front sus-arm YZ2-DTM/CAL 3/3.1
YOK-Z2-008F3GA
entspricht: Z2-008F3G
CHF 15.90
En stock  
+ −
Alum.Main Chassis for SO2.0
YOK-Z2-002S2
CHF 89.90
En stock  
+ −
Alu Front Steering Hub Carrier 12.5° YZ-4
YOK-Z4-413125A
 
CHF 59.90
En stock  
+ −
Aluminum Shock Cap Ball (Hard coat 4pcs)
YOK-YS-8BHA
entspricht: YS-8BH
CHF 8.50
En stock  
+ −
Alu Front Arm für MD1.0
YOK-MD-008FUA
CHF 59.90
En stock  
+ −
L5 Rear Suspension Arm graphite YZ4-SF
YOK-S4-008RL5A
entspricht: S4-008RL5
CHF 13.90
En stock  
+ −
Aluminum Rear Hub Carrier Black für RD2.0/SD3.0
YOK-RD-415AR
Aluminum rear hub carrier for RD/SD series. It is more rigid than the standard plastic one, and improves rear traction and slide control. Upper arm fixing positions allow for more precise adjustment of camber change due to suspension stroke. The lower suspension arm pins can also be selected from...
CHF 59.90
En stock  
+ −
Aluminum Rear Hub Carrier Blue für RD2.0/SD3.0
YOK-RD-415ARBL
Aluminum rear hub carrier for RD/SD series. It is more rigid than the standard plastic one, and improves rear traction and slide control. Upper arm fixing positions allow for more precise adjustment of camber change due to suspension stroke. The lower suspension arm pins can also be selected from...
CHF 59.90
En stock  
+ −
Steering bell crank/Servo horn/Servo mount DTM3/CA
YOK-Z2-200-3A
entspricht: Z2-200-3
CHF 19.90
En stock  
+ −
Aluminum Rear Hub Carrier Purple für RD2.0/SD3.0
YOK-RD-415ARP
Aluminum rear hub carrier for RD/SD series. It is more rigid than the standard plastic one, and improves rear traction and slide control. Upper arm fixing positions allow for more precise adjustment of camber change due to suspension stroke. The lower suspension arm pins can also be selected from...
CHF 59.90
En stock  
+ −
Front One-Way Housing YD-4
YOK-Y4-641
 
CHF 35.00
En stock  
+ −
Aluminum X shock cap Bmax2/4
YOK-B2-S812AA
entspricht: B2-S812A
CHF 12.20
En stock  
+ −
Alu F.Lower Sus.Mount 44mm (Chamfer) YZ-4
YOK-Z4-300FL4
 
CHF 34.90
En stock  
+ −
Multi Weight Plate BD9/BD10
YOK-B9-MWPA
YOKOMO immediately release a weight plate for BD9 which is designed for optimization of the left-right balance and low center of gravity for the BD9 platform. The system is a set of shaped brass plate that can be used in various ways according to the situation. It comes as a set of three with...
CHF 34.90
En stock  
+ −
YD-2 Aluminum UL Front Axle (adjustable range 5mm~
YOK-Y2-010FHA
YD-2 Aluminum UL Front Axle (adjustable range 5mm~9mm)
CHF 25.90
En stock  
+ −
YOKOMO Steering Gyro YG-302V2
YOK-YG-302V2
This is a basic steering gyro that can be used in various categories including drift cars. Upgraded to V2 and has improved response than before, allowing for comfortable driving even on slippery roads. Can be used with transmitters and receivers with 2 or more channels, and is used by wiring...
CHF 57.90
En stock  
+ −
Bell crank (1mm longer/F8×F5 bearing assembled)
YOK-B7-202S1
 
CHF 42.90
En stock  
+ −
YZ-2 Aluminum bell Crank (L/R)
YOK-Z2-201BA3A
entspricht: Z2-201BA3
CHF 32.90
En stock  
+ −
Alu Steering Block YD-4
YOK-Y4-415SC
 
CHF 42.90
En stock  
+ −
Aluminum suspension mount set for RD2.0
YOK-RD-301AS
This aluminum suspension mount set for RD2.0 further enhances driving performance. The B width for the front is 43.5mm standard, and the D width for the rear is 57.2mm standard for both the front and rear sides, but the suspension pin width can be fine-tuned by changing the suspension mount...
CHF 85.50
En stock  
+ −
Drift spring set (6 Types) for RWD Drifting
YOK-D-180A
¦ YOKOMO have developed a new type of spring allowing for further fine tuning of your chassis to suit surface type and track layout! ¦ The front springs are wound with a high pitch, the short high response spring is suitable for the high traction YD-2 series. Increasing the front...
CHF 44.90
En stock  
+ −
Alum.Main Chassis for MO3.0
YOK-MO-002-3
CHF 84.90
En stock  
+ −
Rotary Sensor Set Yokomo M2 Motor
YOK-RP-038A
entspricht: RP-038
CHF 41.90
En stock  
+ −
Wing Plate for Off-Road Car
YOK-Z2-110A
entspricht: Z2-110
CHF 11.50
En stock  
+ −
Alum.13 Shock Cap (2pcs.) for SO/MO2.0
YOK-S4-S813A
Aluminum shock cap with drain screw for easy assembly. Easy to quantify settings and absorb road impacts with increased operating efficiency.
CHF 20.50
En stock  
+ −
Ball Diff Kit YZ-2CA/DT/YZ-4 DP48 52T
YOK-Z2-500A
 
CHF 49.90
En stock  
+ −
Factory Team Alu Chassis BD11/BD10
YOK-B11-002FA
This aluminum main chassis is used in the BD11 Factory Team Edition. The chassis is made of hard aluminum material, but with bold wall cutting, mainly around the rear, to provide slightly more rear traction. Traditionally, aluminum chassis are used for high-grip surfaces such as carpet,...
CHF 159.90
En stock  
+ −
Alu Chassis BD12
YOK-B12-002A
CHF 159.90
En stock  
+ −
“X30” 13 shock set (rear/short)
YOK-S4-S1M13
This is a F13mm big bore shock set. The M size is ideal for the rear of the SO/MO series, and the shaft diameter is 3.0mm.
CHF 62.90
En stock  
+ −
MIP Pucks Bi-metal dogbone 67mm for YZ-2 Stock ver
YOK-Z2-18841
CHF 79.90
En stock  
+ −
Gear differential set for BD10
YOK-B10-500GSA
A gear differential set used for the rear differential of BD10. # 7500 differential oil is included with the gear differential assembly.
CHF 52.90
Rupture de stock
Aluminum Adj. Suspension Mount Set Blau RD2.0
YOK-RD-301ASBL
CHF 79.90
En stock  
+ −
Aluminum Adj. Suspension Mount Set Rot für RD2.0
YOK-RD-301ASR
CHF 79.90
En stock  
+ −
Front upper arm mount
YOK-Z2-300FUA
entspricht: Z2-300FU
CHF 22.90
En stock  
+ −
B-Max II "Hard" Li-Po Compatible Main Chassis NEW
YOK-BM-002LH
 
CHF 39.90
En stock  
+ −
Suspension mount messing separate 42.0mm-7.0gr.
YOK-B7-3120BSB
 
CHF 39.90
En stock  
+ −
LMR 27 Rear Wing
YOK-Z2-CAL2WA
entspricht: Z2-CAL2W
CHF 14.90
En stock  
+ −
Tubular Graphite Main Drive Shaft for YD-4MR
YOK-Y4-644GMR
 
CHF 39.90
En stock  
+ −
SLF Short Shock Set
YOK-B7-2014S
 
CHF 79.00
En stock  
+ −
Graphite Steering Block BD9/BD10
YOK-B9-415SGA
entspricht: B9-415SG
CHF 14.50
En stock  
+ −
Motor mount
YOK-B7-32L15
 
CHF 38.90
En stock  
+ −
SLF Big Bore Shock set for DP-YD2 Red
YOK-Y2-SBBSRA
entspricht: Y2-SBBSR
CHF 77.00
En stock  
+ −
Rear Wheel
YOK-B4-827A
entspricht: B4-827
AuswahlhilfeBuggy MaterialKunststoff Reifen/Rad-TypFelgen Massstab1:10 EinsatzOff-Road
CHF 6.40
En stock  
+ −
Alminum Suspension mount (44.9mm·Black)
YOK-B7-3149B
 
CHF 21.90
En stock  
+ −
Front brace for YZ-4 Narrow type
YOK-Z4-300FB2
 
CHF 13.90
En stock  
+ −
Regler Programmierkarte für BL4 Serie
YOK-BL-YBP4
CHF 32.90
En stock  
+ −
Gull Type Front Susp. Arm L/R (0) YZ-4
YOK-Z4-008FG
CHF 8.90
En stock  
+ −
Verfügbarkeit
Verfügbar beim Lieferanten
Abmessungen
Auswahlhilfe
Material
Prix
CHF
–
CHF
  • CHF 1.5
  • CHF 849
Reifen/Rad-Typ
Servo-Typ
Verwendung
Massstab
Motor / Antrieb
Einsatz
Anspruch
Lackierung
Fertigungsgrad
Max. Geschwindigkeit
Marke
Betriebsspannung