ERSATZTEIL-FINDER

Yokomo

Trier par:
Recommandé
48
F/R body mount for BD9/10/11 (hard)
YOK-B11-016H
CHF9.90
En stock  
+ −
Titanium Lower Shock Mount for BD11
YOK-B11-S9T
CHF12.90
En stock  
+ −
Graphite center stiffener for BD12
YOK-B12-302CS
CHF19.90
En stock  
+ −
Shock shaft guide for BD12
YOK-B12-S2B
CHF13.50
En stock  
+ −
Aluminum spring cup for BD12 (bearing specificatio
YOK-B12-S3S
CHF10.50
En stock  
+ −
Aluminum shock adjust nut/O ring for BD12
YOK-B12-S4AJ
CHF10.50
En stock  
+ −
Aluminum upper shock cap nut for BD12
YOK-B12-S4C1
CHF9.70
En stock  
+ −
Aluminum shock cylinder for BD12
YOK-B12-S4S
CHF24.90
En stock  
+ −
Shock shaft for BD12
YOK-B12-S5S
CHF7.50
En stock  
+ −
Shock cap/shock end for BD12
YOK-B12-S6
CHF7.50
En stock  
+ −
AXON TCS 90T spur gear (hard)
YOK-SG-A6490
CHF7.50
En stock  
+ −
Graphite rear upper deck 1.5mm für BD12
YOK-B12-003RS
CHF23.90
En stock  
+ −
Graphite rear stiffener plate für BD11/BD12
YOK-B12-003RSP
CHF21.00
En stock  
+ −
Belt tension adjustment cam for BD10/9 (2 pieces m
YOK-B10-BTCBA
entspricht: B10-BTCB
CHF19.90
En stock  
+ −
Chassis Schutzfolie 200x390mm
YOK-ZC-CPS
Protective sheet that is attached to the back of the chassis to protect the chassis from road surface interference.The slightly thicker material and stronger adhesive surface ensure a firm bond. The price is reasonable for periodic replacement. It can be used for speed category,...
CHF3.90
Rupture de stock
Front Stabi Draht 0.9mm BD11/BD12
YOK-B11-412F09A
Sway bar for BD12/11 series touring car chassis. With 0.9mm and 1.0mm wire diameter settings, which are thinner than the previous lineup, these bars are mainly effective when driving on outdoor asphalt, using roll to increase grip. Please use as setting parts.
CHF8.90
En stock  
+ −
Front Stabidraht 1.0mm BD11/BD12
YOK-B11-412F0A
Sway bar for BD12/11 series touring car chassis. With 0.9mm and 1.0mm wire diameter settings, which are thinner than the previous lineup, these bars are mainly effective when driving on outdoor asphalt, using roll to increase grip. Please use as setting parts.
CHF8.90
En stock  
+ −
Stabidraht hinten 0.9mm BD11/BD12
YOK-B11-412R09A
Sway bar for BD12/11 series touring car chassis. With 0.9mm and 1.0mm wire diameter settings, which are thinner than the previous lineup, these bars are mainly effective when driving on outdoor asphalt, using roll to increase grip. Please use as setting parts.
CHF8.90
En stock  
+ −
Stabidraht hinten 1mm BD11/BD12
YOK-B11-412R0A
Sway bar for BD12/11 series touring car chassis. With 0.9mm and 1.0mm wire diameter settings, which are thinner than the previous lineup, these bars are mainly effective when driving on outdoor asphalt, using roll to increase grip. Please use as setting parts.
CHF8.90
En stock  
+ −
Aluminum motor mount for BD10F
YOK-B10-302MFA
Aluminum motor mount for BD10F. Backlash can be adjusted by sliding the joint with the center mount.
CHF22.90
En stock  
+ −
Steel S2 Chassis weight (26g) for SO2.0
YOK-Z2-002WS
CHF15.90
En stock  
+ −
Alum Adjustable Front Axle for SO2.0
YOK-Z2-010AFA
CHF16.90
En stock  
+ −
Off-road body for SO series (light weight)
YOK-Z2-101S2L
CHF26.90
En stock  
+ −
Wide front wing for SO series
YOK-Z2-107FW2
CHF8.90
En stock  
+ −
Graphite Steering Block Plate DOT1for SO2.0
YOK-Z2-415S21
CHF11.50
En stock  
+ −
Steering Block L/R (Hard) for SO2.0
YOK-Z2-415S2H
CHF6.90
En stock  
+ −
Steering Block L/R (Graph) for SO2.0(2pcs.)
YOK-Z2-415S2G
CHF11.90
En stock  
+ −
M2 x 3mm flat head socket screw (4 pieces)
YOK-ZC-F23
CHF2.90
En stock  
+ −
Gokuraku off-road wing (straight)
YOK-ZS-GWBS
CHF14.90
En stock  
+ −
Graphite shock tower für RS1.0 vorne
YOK-RS-017G
CHF14.90
En stock  
+ −
Graphite shock tower für RS1.0 hinten
YOK-RS-018G
CHF22.90
En stock  
+ −
Alu Brush Motor Adapter für RS1.0
YOK-RS-302AD
CHF8.90
En stock  
+ −
RP Ultra Shock Oil #27.5 (Light Yellow)
YOK-RP-113275
CHF8.90
En stock  
+ −
RP Ultra Shock Oil #32.5 (Brown)
YOK-RP-113325
CHF8.90
En stock  
+ −
RP Ultra Shock Oil #37.5 (Purple)
YOK-RP-113375
CHF8.90
En stock  
+ −
RP Ultra Shock Oil #42.5 (Blue)
YOK-RP-113425
CHF8.90
En stock  
+ −
Steel S2 Front Chassis weight for SO2.0
YOK-Z2-002FWS
Steel front chassis weight for SO2.0. Installed under the front side servo of the chassis and adjusted the weight and rigidity. Weight is approximately 20g.
CHF17.50
En stock  
+ −
Alum. S2 Front Chassis weight for SO2.0
YOK-Z2-002FWA
Aluminum front chassis weight for SO2.0. Installed under the front side servo of the chassis and adjusted the weight and rigidity. Weight is about 7g.
CHF17.50
En stock  
+ −
13 Shock Plastic Parts for SO/MO2.0
YOK-S4-S913
CHF11.90
En stock  
+ −
13 Spring Adjust Nut for SO/MO2.0
YOK-S4-S4AJ13
CHF7.50
En stock  
+ −
O-Ring Set (2set) for SO/MO2.0 (Light Weight)
YOK-S4-S3OS
CHF3.90
En stock  
+ −
13Shock Piston f1.6x2x2.0mmfor SO/MO2.0
YOK-S4-S16213
Piston for F13mm shock. The hole diameter is 1.6mm and there are 2 holes. The thickness of the piston is 2.0mm. Contains 2 pieces.
CHF7.90
En stock  
+ −
13Shock Piston f1.7x2x2.0mmfor SO/MO2.0
YOK-S4-S17213
Piston for F13mm shock. The hole diameter is 1.7mm with 2 holes. The thickness of the piston is 2.0mm. Contains 2 pieces.
CHF7.90
En stock  
+ −
13Shock Piston f1.8x2x2.0mmfor SO/MO2.0
YOK-S4-S18213
Piston for F13mm shock. The hole diameter is 1.8mm and there are 2 holes. The thickness of the piston is 2.0mm. Contains 2 pieces.
CHF7.90
En stock  
+ −
Graphite RTC Axle Block Spacer (2.4mm)
YOK-B12-RTC-7
This graphite plate is mounted on the front bumper to strengthen the bumper. By catching crashes and other impacts with the bulkhead, it prevents damage to the front part of the main chassis.
CHF12.90
En stock  
+ −
Graphite Bumper Support (2.4mm
YOK-B12-001BS
This graphite plate is mounted on the front bumper to strengthen the bumper. By catching crashes and other impacts with the bulkhead, it prevents damage to the front part of the main chassis.
CHF9.90
En stock  
+ −
Graphite Front Shock Tower Stiffner (2.4mm)
YOK-B12-017S
This graphite plate connects the lower portion of the front shock tower to increase rigidity. It increases the rigidity of the shock tower and improves the shock's operating precision, while leaving the bulkhead surrounding it supple.
CHF9.90
En stock  
+ −
Graphite Separate Battery Holder
YOK-B12-118S
Lightweight graphite battery holder. Split front and rear sections allow the chassis to remain flexible for torsion. Spacers are included to adjust to the battery thickness.
CHF20.90
Rupture de stock
Verfügbarkeit
Verfügbar beim Lieferanten
Abmessungen
Auswahlhilfe
Material
Prix

CHF  –  CHF

  • ‎CHF1.5
  • ‎CHF949
Reifen/Rad-Typ
Servo-Typ
Verwendung
Massstab
Motor / Antrieb
Einsatz
Anspruch
Lackierung
Fertigungsgrad
Max. Geschwindigkeit
Marke
Betriebsspannung
Effacer