ERSATZTEIL-FINDER

Yokomo

Ordnen nach:
Empfohlen
48
YOKOMO Parts Case 86X103X34mm
YOK-YC-13
new lineup of parts cases with the Yokomo logo has been added to the series. The three new cases are suitable for storing relatively small parts, and feature a large number of movable dividers that can be positioned in a variety of ways. The body is made of polypropylene, which is...
CHF8.90
Auf Lager  
+ −
YOKOMO Parts Case 205X145X40mm
YOK-YC-14
A new lineup of parts cases with the Yokomo logo has been added to the series. The three new cases are suitable for storing relatively small parts, and feature a large number of movable dividers that can be positioned in a variety of ways. The body is made of polypropylene, which is...
CHF13.90
Auf Lager  
+ −
BD-919/BD10/BD10LC AXON super hub axle pin/"O" rin
YOK-B10-WHAS2A
entspricht: B10-WHAS2
CHF4.50
Auf Lager  
+ −
Graphite front body mount stay for MD1.0
YOK-MD-016MG
CHF34.90
Auf Lager  
+ −
Alu high mount Battery Post (R)
YOK-Y2-118RL
CHF23.90
Auf Lager  
+ −
Alu hight mount battery post (F)
YOK-Y2-118FL
CHF16.90
Auf Lager  
+ −
Drift LTS Front Spring 0.9x45x8.5turns
YOK-D-186
CHF11.50
Auf Lager  
+ −
Drift LTS Front Spring 1.0×48mm×9.0turns
YOK-D-187
CHF11.90
Auf Lager  
+ −
Drift LTS Rear Spring 1.0×48mm×10.0turns
YOK-D-188
CHF11.90
Auf Lager  
+ −
F/R body mount for BD9/10/11 (hard)
YOK-B11-016H
CHF9.90
Auf Lager  
+ −
Titanium Lower Shock Mount for BD11
YOK-B11-S9T
CHF12.90
Auf Lager  
+ −
Graphite center stiffener for BD12
YOK-B12-302CS
CHF19.90
Auf Lager  
+ −
Shock shaft guide for BD12
YOK-B12-S2B
CHF13.50
Auf Lager  
+ −
Aluminum spring cup for BD12 (bearing specificatio
YOK-B12-S3S
CHF10.50
Auf Lager  
+ −
Aluminum shock adjust nut/O ring for BD12
YOK-B12-S4AJ
CHF10.50
Auf Lager  
+ −
Aluminum upper shock cap nut for BD12
YOK-B12-S4C1
CHF9.70
Auf Lager  
+ −
Aluminum shock cylinder for BD12
YOK-B12-S4S
CHF24.90
Auf Lager  
+ −
Shock shaft for BD12
YOK-B12-S5S
CHF7.50
Auf Lager  
+ −
Shock cap/shock end for BD12
YOK-B12-S6
CHF7.50
Auf Lager  
+ −
Graphite rear upper deck 1.5mm für BD12
YOK-B12-003RS
CHF23.90
Auf Lager  
+ −
Graphite rear stiffener plate für BD11/BD12
YOK-B12-003RSP
CHF21.00
Auf Lager  
+ −
Belt tension adjustment cam for BD10/9 (2 pieces m
YOK-B10-BTCBA
entspricht: B10-BTCB
CHF19.90
Auf Lager  
+ −
Chassis Schutzfolie 200x390mm
YOK-ZC-CPS
Protective sheet that is attached to the back of the chassis to protect the chassis from road surface interference.The slightly thicker material and stronger adhesive surface ensure a firm bond. The price is reasonable for periodic replacement. It can be used for speed category,...
CHF3.90
Auf Lager  
+ −
Front Stabi Draht 0.9mm BD11/BD12
YOK-B11-412F09A
Sway bar for BD12/11 series touring car chassis. With 0.9mm and 1.0mm wire diameter settings, which are thinner than the previous lineup, these bars are mainly effective when driving on outdoor asphalt, using roll to increase grip. Please use as setting parts.
CHF8.90
Auf Lager  
+ −
Front Stabidraht 1.0mm BD11/BD12
YOK-B11-412F0A
Sway bar for BD12/11 series touring car chassis. With 0.9mm and 1.0mm wire diameter settings, which are thinner than the previous lineup, these bars are mainly effective when driving on outdoor asphalt, using roll to increase grip. Please use as setting parts.
CHF8.90
Auf Lager  
+ −
Stabidraht hinten 0.9mm BD11/BD12
YOK-B11-412R09A
Sway bar for BD12/11 series touring car chassis. With 0.9mm and 1.0mm wire diameter settings, which are thinner than the previous lineup, these bars are mainly effective when driving on outdoor asphalt, using roll to increase grip. Please use as setting parts.
CHF8.90
Auf Lager  
+ −
Stabidraht hinten 1mm BD11/BD12
YOK-B11-412R0A
Sway bar for BD12/11 series touring car chassis. With 0.9mm and 1.0mm wire diameter settings, which are thinner than the previous lineup, these bars are mainly effective when driving on outdoor asphalt, using roll to increase grip. Please use as setting parts.
CHF8.90
Auf Lager  
+ −
Aluminum motor mount for BD10F
YOK-B10-302MFA
Aluminum motor mount for BD10F. Backlash can be adjusted by sliding the joint with the center mount.
CHF22.90
Auf Lager  
+ −
Steel S2 Chassis weight (26g) for SO2.0
YOK-Z2-002WS
CHF15.90
Auf Lager  
+ −
Alum Adjustable Front Axle for SO2.0
YOK-Z2-010AFA
CHF16.90
Auf Lager  
+ −
Off-road body for SO series (standard)
YOK-Z2-101S2
CHF26.90
Auf Lager  
+ −
Off-road body for SO series (light weight)
YOK-Z2-101S2L
CHF26.90
Auf Lager  
+ −
Wide front wing for SO series
YOK-Z2-107FW2
CHF8.90
Auf Lager  
+ −
Graphite Steering Block Plate DOT1for SO2.0
YOK-Z2-415S21
CHF11.50
Auf Lager  
+ −
Steering Block L/R (Hard) for SO2.0
YOK-Z2-415S2H
CHF6.90
Auf Lager  
+ −
Steering Block L/R (Graph) for SO2.0(2pcs.)
YOK-Z2-415S2G
CHF11.90
Auf Lager  
+ −
M2 x 3mm flat head socket screw (4 pieces)
YOK-ZC-F23
CHF2.90
Auf Lager  
+ −
Gokuraku off-road wing (straight)
YOK-ZS-GWBS
CHF14.90
Auf Lager  
+ −
Graphite shock tower für RS1.0 vorne
YOK-RS-017G
CHF14.90
Auf Lager  
+ −
Graphite shock tower für RS1.0 hinten
YOK-RS-018G
CHF22.90
Auf Lager  
+ −
Alu Brush Motor Adapter für RS1.0
YOK-RS-302AD
CHF8.90
Auf Lager  
+ −
RP Ultra Shock Oil #27.5 (Light Yellow)
YOK-RP-113275
CHF8.90
Auf Lager  
+ −
RP Ultra Shock Oil #32.5 (Brown)
YOK-RP-113325
CHF8.90
Auf Lager  
+ −
RP Ultra Shock Oil #37.5 (Purple)
YOK-RP-113375
CHF8.90
Auf Lager  
+ −
RP Ultra Shock Oil #42.5 (Blue)
YOK-RP-113425
CHF8.90
Auf Lager  
+ −
Steel S2 Front Chassis weight for SO2.0
YOK-Z2-002FWS
Steel front chassis weight for SO2.0. Installed under the front side servo of the chassis and adjusted the weight and rigidity. Weight is approximately 20g.
CHF17.50
Auf Lager  
+ −
Alum. S2 Front Chassis weight for SO2.0
YOK-Z2-002FWA
Aluminum front chassis weight for SO2.0. Installed under the front side servo of the chassis and adjusted the weight and rigidity. Weight is about 7g.
CHF17.50
Auf Lager  
+ −
13 Shock Plastic Parts for SO/MO2.0
YOK-S4-S913
CHF11.90
Auf Lager  
+ −
Verfügbarkeit
Verfügbar beim Lieferanten
Abmessungen
Auswahlhilfe
Material
Preis

CHF  –  CHF

  • ‎CHF1.5
  • ‎CHF949
Reifen/Rad-Typ
Servo-Typ
Verwendung
Massstab
Motor / Antrieb
Einsatz
Anspruch
Lackierung
Fertigungsgrad
Max. Geschwindigkeit
Marke
Betriebsspannung
Zurücksetzen (reset)