Français (CH)
ERSATZTEIL-FINDER

Yokomo

Recommandés
48 Par page
Steel Rod End Ball for YZ-870C S-Size
YOK-YZ-205SS
This rod end ball ismade of steel for greatly increased durability and can be used in place of the rod end ball on the YZ-870c Super Dog Fighter's upper arm and tie rods.
CHF 9.10
Standard Spring RD2.0
YOK-YS-RDS
Standard Springs for RD2.0 Kit
CHF 6.80
Super Dog Fighter Decals
YOK-ZC-D4
These Decals are included in the YZ-870C.
CHF 5.90
En stock
+ −
Shock Cap Ball (Purple) for YD-2
YOK-Y2-S8PA
This is a shock cap ball used for the upper pivot of the YD-2 shock. Contains 4 pieces.
CHF 9.50
En stock
+ −
Shock Cap Ball (Red) for YD-2
YOK-Y2-S8RA
This is a shock cap ball used for the upper pivot of the YD-2 shock. Contains 4 pieces.
CHF 9.50
En stock
+ −
Front Wheel (Pink) 2.2 Inch for YZ-870C
YOK-YZ-821-2
The YZ-870C uses the standard 1.9-inch size tire/wheel used in the 1980s, but a new wheel is being introduced to allow the use of current 2.2-inch size tires. The YZ-870C's distinctive wheel hubs will be retained, but the wheel outer diameter will be increased to allow the use of 2.2-inch...
CHF 8.90
En stock
+ −
Rear Wheel (Pink) 2.2 Inch for YZ-870C
YOK-YZ-827-2
The YZ-870C uses the standard 1.9-inch size tire/wheel used in the 1980s, but a new wheel is being introduced to allow the use of current 2.2-inch size tires. The YZ-870C's distinctive wheel hubs will be retained, but the wheel outer diameter will be increased to allow the use of 2.2-inch...
CHF 9.90
En stock
+ −
Lexus RC GT3 Clear Body for Touring Car
YOK-SP-LFGT3B
This real scale body fits just right for 190mm wide touring cars, and is a scale-down version of the LEXUS RCF GT3, complete with wing and decals,all officially approved by Toyota. The massive form and large rear wing provide a highly stable driving feel. It is also compatible with the...
Auswahlhilfe190mm Touring MaterialLexan Massstab1:10 EinsatzOn-Road Drift, On-Road Lackierungunlackiert
CHF 47.90
En stock
+ −
Drift Package 2WD Pandem GR Supra Kit (Clear)
YOK-DP-GRA90
The famous "DRIFT PACKAGE", the pioneer of drift RC cars and synonymous with drift RC cars, is back in 2WD form! Based on a conventional assembly kit, this reasonably priced package includes a clear body and tires/wheels. If you purchase the steering gyro and running set, you can enjoy...
CHF 283.10
En précommande, livraison quand l'article est disponible
+ −
Drift Package 2WD Pandem GR Supra Kit (White)
YOK-DP-GRA90W
This is a kit with pre-painted body of the Drift Package 2WD based on the RD2.0. By pre-painting and cutting the body, which can be difficult for beginners, the kit production time and effort is greatly reduced, allowing you to enjoy the fun of chassis assembly while also making it easier to...
CHF 304.00
En précommande, livraison quand l'article est disponible
+ −
Low Friction Drive Belt for BD10F
YOK-BD-309LWA
This is a low friction drive belt used when running stock motors in FWD drive cars such as BDFWD and BD10F. Made of a material that is more flexible than standard belts, it reduces driving resistance and increases top speed.
CHF 16.90
En stock
+ −
Aluminum Servo Mount MS1.0
YOK-MS-203
CHF 35.90
Graphite Front Upper Deck MS1.0
YOK-MS-003F
CHF 19.70
En stock
+ −
Graphite Rear Upper Deck MS1.0
YOK-MS-003R
CHF 19.70
En stock
+ −
Upper Arm Set MS1.0
YOK-MS-008U
CHF 7.90
En stock
+ −
Suspension Ball Cap Spacer (1.0/1.5mm) MS1.0
YOK-MS-009S
CHF 5.70
Graphite Front Shock Tower MS1.0
YOK-MS-017
CHF 22.90
En stock
+ −
Graphite Rear Shock Tower
YOK-MS-018
CHF 26.90
En stock
+ −
Aluminum Bell Crank Center Link
YOK-MS-201LBA
CHF 21.40
Aluminum Steering Bell Crank MS1.0
YOK-MS-202SBA
CHF 21.40
En stock
+ −
Aluminum Motor Mount MS1.0
YOK-MS-302M
CHF 59.90
Aluminum Front Lower Bulkhead (A) MS1.0
YOK-MS-32FLA
CHF 26.90
En stock
+ −
Aluminum Front Lower Bulkhead (B) MS1.0
YOK-MS-32FLB
CHF 26.90
En stock
+ −
Aluminum Front Upper Bulkhead (A) MS1.0
YOK-MS-32FUA
CHF 18.80
Aluminum Front Upper Bulkhead (B) MS1.0
YOK-MS-32FUB
CHF 18.80
Aluminum Rear Lower Bulkhead (A) MS1.0
YOK-MS-32RLA
CHF 26.90
En stock
+ −
Aluminum Rear Lower Bulkhead (B) MS1.0
YOK-MS-32RLB
CHF 26.90
En stock
+ −
Aluminum Rear Upper Bulkhead (A) MS1.0
YOK-MS-32RUA
CHF 18.80
Aluminum Rear Upper Bulkhead (B) MS1.0
YOK-MS-32RUB
CHF 20.90
En stock
+ −
Front Sway Bar Wire 1.1mm MS1.0
YOK-MS-412F1
CHF 7.90
En stock
+ −
Rear Sway Bar Wire 1.1mm MS1.0
YOK-MS-412R1
CHF 7.90
En stock
+ −
Aluminum Stabilizer Joint Ball (2pcs) MS1.0
YOK-MS-412SB
CHF 8.00
Shock Piston 1.1mm x 6 Hole (2pcs) MS1.0
YOK-MS-S116
CHF 4.60
Shock Shaft Guide (4pcs) MS1.0
YOK-MS-S2B
CHF 5.90
En stock
+ −
Spring Adjust Nut / O-Ring (2pcs) MS1.0
YOK-MS-S4AJ
CHF 8.90
En stock
+ −
Aluminum Upper Shock Cap Nut (2pcs) MS1.0
YOK-MS-S4C1
CHF 7.90
En stock
+ −
Aluminum Shock O-Ring Cap (2pcs)
YOK-MS-S4C2
CHF 6.90
En stock
+ −
Shock Cylinder (2pcs) MS1.0
YOK-MS-S4S
CHF 17.90
En stock
+ −
Shock Shaft (19.1mm/ 2pcs) MS1.0
YOK-MS-S5S
CHF 5.90
En stock
+ −
Linear Shock Springs (1.90/Red) MS1.0
YOK-MS-SSL190
CHF 11.90
En stock
+ −
Steel Turnbuckle 13mm (2pcs) MS1.0
YOK-MS-TB13
CHF 5.70
En stock
+ −
Linear Shock Springs (1.95/Yellow) MS1.0
YOK-MS-SSL195
CHF 11.90
En stock
+ −
Linear Shock Springs (2.00/Blue) MS1.0
YOK-MS-SSL200
CHF 11.90
En stock
+ −
Front Sway Bar Wire 1.0mm MS1.0
YOK-MS-412F0
CHF 7.90
En stock
+ −
Front Sway Bar Wire 1.2mm MS1.0
YOK-MS-412F2
CHF 7.90
En stock
+ −
Rear Sway Bar Wire 1.0mm MS1.0
YOK-MS-412R0
CHF 7.90
En stock
+ −
Rear Sway Bar Wire 1.2mm MS1.0
YOK-MS-412R2
CHF 7.90
En stock
+ −
Light Buckets für Pandem GR86
YOK-SD-GR86L
CHF 15.90
En stock
+ −
Verfügbarkeit
Verfügbar beim Lieferanten
Abmessungen
Auswahlhilfe
Material
Prix
CHF
–
CHF
  • CHF 1.5
  • CHF 849
Reifen/Rad-Typ
Servo-Typ
Verwendung
Massstab
Motor / Antrieb
Einsatz
Anspruch
Lackierung
Fertigungsgrad
Max. Geschwindigkeit
Marke
Betriebsspannung