Deutsch (CH)
ERSATZTEIL-FINDER

Yokomo

Empfohlen
48 Pro Seite
Aluminum steering bell crank 20mm for BD10/9
YOK-B10-202SBLA
This is an optional steering bell crank that changes the steering characteristics of BD10. The length from the center of the steering post to the linkage pivot at the tip is 20mm, which is 1.5mm longer than the BD10 standard bell crank (18.5mm). The Ackermann ratio changes and the turning...
CHF 24.90
Auf Lager  
+ −
Cooling fan mount for SO1.0/2.0/YZ-2
YOK-Z2-CFM
CHF 22.90
Auf Lager  
+ −
Cooling fan mount for YZ-4SF
YOK-S4-CFMA
entspricht: S4-CFM
CHF 24.50
Auf Lager  
+ −
Molded Suspension Parts Set for RO1.0
YOK-Z2-300RO
CHF 15.90
Auf Lager  
+ −
Horizontal Body Mount für BD12
YOK-B12-016HB
Compatible with rear body posts that protrude rearward, such as BD12, these mounting parts reliably receive downforce and increase rear traction. Compatible with Twister/Twister Special bodies, the mounting parts are secured to the body using the wing fixing screws. Offset can be...
CHF 8.90
Auf Lager  
+ −
16mm Titanium Turn Buckle (2pcs)
YOK-ZC-TB16T
This special screw is manufactured with a reverse thread on one side of the screw at both ends, allowing the distance between parts at both ends to be adjusted when the screw is rotated in one direction. It is mainly used for upper arms and tie rods to facilitate adjustment of camber...
CHF 8.90
Nicht auf Lager
18mm Titanium Turn Buckle (2pcs)
YOK-ZC-TB18T
This special screw is manufactured with a reverse thread on one side of the screw at both ends, allowing the distance between parts at both ends to be adjusted when the screw is rotated in one direction. It is mainly used for upper arms and tie rods to facilitate adjustment of camber...
CHF 8.90
Nicht auf Lager
20mm Titanium Turn Buckle (2pcs)
YOK-ZC-TB20T
This special screw is manufactured with a reverse thread on one side of the screw at both ends, allowing the distance between parts at both ends to be adjusted when the screw is rotated in one direction. It is mainly used for upper arms and tie rods to facilitate adjustment of camber...
CHF 9.90
Auf Lager  
+ −
25mm Titanium Turn Buckle (2pcs)
YOK-ZC-TB25T
This special screw is manufactured with a reverse thread on one side of the screw at both ends, allowing the distance between parts at both ends to be adjusted when the screw is rotated in one direction. It is mainly used for upper arms and tie rods to facilitate adjustment of camber...
CHF 9.90
Auf Lager  
+ −
27mm Titanium Turn Buckle (2pcs)
YOK-ZC-TB27T
This special screw is manufactured with a reverse thread on one side of the screw at both ends, allowing the distance between parts at both ends to be adjusted when the screw is rotated in one direction. It is mainly used for upper arms and tie rods to facilitate adjustment of camber...
CHF 9.90
Auf Lager  
+ −
30mm Titanium Turn Buckle (2pcs)
YOK-ZC-TB30T
This special screw is manufactured with a reverse thread on one side of the screw at both ends, allowing the distance between parts at both ends to be adjusted when the screw is rotated in one direction. It is mainly used for upper arms and tie rods to facilitate adjustment of camber...
CHF 11.90
Auf Lager  
+ −
33mm Titanium Turn Buckle (2pcs)
YOK-ZC-TB33T
This special screw is manufactured with a reverse thread on one side of the screw at both ends, allowing the distance between parts at both ends to be adjusted when the screw is rotated in one direction. It is mainly used for upper arms and tie rods to facilitate adjustment of camber...
CHF 11.90
Auf Lager  
+ −
36mm Titanium Turn Buckle (2pcs)
YOK-ZC-TB36T
This special screw is manufactured with a reverse thread on one side of the screw at both ends, allowing the distance between parts at both ends to be adjusted when the screw is rotated in one direction. It is mainly used for upper arms and tie rods to facilitate adjustment of camber...
CHF 11.90
Auf Lager  
+ −
39mm Titanium Turn Buckle (2pcs)
YOK-ZC-TB39T
This special screw is manufactured with a reverse thread on one side of the screw at both ends, allowing the distance between parts at both ends to be adjusted when the screw is rotated in one direction. It is mainly used for upper arms and tie rods to facilitate adjustment of camber...
CHF 11.90
Auf Lager  
+ −
42mm Titanium Turn Buckle (2pcs)
YOK-ZC-TB42T
This special screw is manufactured with a reverse thread on one side of the screw at both ends, allowing the distance between parts at both ends to be adjusted when the screw is rotated in one direction. It is mainly used for upper arms and tie rods to facilitate adjustment of camber...
CHF 12.90
Auf Lager  
+ −
50mm Titanium Turn Buckle (2pcs)
YOK-ZC-TB50T
This special screw is manufactured with a reverse thread on one side of the screw at both ends, allowing the distance between parts at both ends to be adjusted when the screw is rotated in one direction. It is mainly used for upper arms and tie rods to facilitate adjustment of camber...
CHF 13.90
Auf Lager  
+ −
Motor Brushes (2pcs)
YOK-YM-086
Replacement motor brushes for Yokomo Pro Stock and Drift series brush motors. 5mm x 4mm size.
CHF 4.90
Auf Lager  
+ −
Graphite Scale (150mm)
YOK-YT-CS15
This scale is manufactured with real carbon material. Keep it in your tool case to help you in various situations.
CHF 17.90
Auf Lager  
+ −
RP Ultra Shock Oil #40 (Red)
YOK-RP-113400
CHF 8.90
Auf Lager  
+ −
Front Tire for YZ-870C
YOK-TF-8
CHF 13.90
Auf Lager  
+ −
Rear Tire for YZ-870C
YOK-TR-8
CHF 14.90
Auf Lager  
+ −
Bumper/Wire Plate for YZ-870C
YOK-YZ-001
CHF 7.40
Nicht auf Lager
Univ. Drive Shaft (2pcs) for YZ-870C
YOK-YZ-010
CHF 38.90
Auf Lager  
+ −
Front Shock Set (2pcs) for RO1.0
YOK-Z2-S1FS
CHF 22.90
Auf Lager  
+ −
Front suspension mount plate for RO1.0 (steel/2 pi
YOK-Z2-300FBS
CHF 7.90
Auf Lager  
+ −
Rubber Band for Tire Adhesion (15mm width/20pcs)
YOK-YT-WG3
CHF 11.00
Auf Lager  
+ −
FRP Front Shock Tower for YZ-870C
YOK-YZ-017
CHF 13.90
Auf Lager  
+ −
Wing for YZ-870C
YOK-YZ-101W
CHF 14.90
Auf Lager  
+ −
Steering Hub Carrier for YZ-870C
YOK-YZ-413
CHF 7.90
Auf Lager  
+ −
King Pin (2pcs.) for YZ-870C
YOK-YZ-414
CHF 5.90
Auf Lager  
+ −
Alum. Steering Block L/R for YZ-870C
YOK-YZ-415
CHF 11.90
Auf Lager  
+ −
Front Wheel (Pink) for YZ-870C
YOK-YZ-821
CHF 7.90
Auf Lager  
+ −
Rear Wheel (Pink) for YZ-870C
YOK-YZ-827
CHF 8.50
Auf Lager  
+ −
O-Ring Set (P3x4/F8x2/F10x2) for YZ-870C
YOK-YZ-S3OS
CHF 4.90
Auf Lager  
+ −
Shock Cap (4pcs.) for YZ-870C
YOK-YZ-S8
CHF 5.90
Auf Lager  
+ −
Rod End Ball L (4pcs) for YZ-870C
YOK-YZ-205L
CHF 3.40
Auf Lager  
+ −
Super Dog Fighter Decal
YOK-ZC-D4PI
These Super Dog Fighter decals are reminiscent of the 80s. The lineup includes the same four colors as at the time: pink, red, white, and black, to match the body color.
CHF 5.90
Auf Lager  
+ −
Super Dog Fighter Decal
YOK-ZC-D4R
These Super Dog Fighter decals are reminiscent of the 80s. The lineup includes the same four colors as at the time: pink, red, white, and black, to match the body color.
CHF 5.90
Auf Lager  
+ −
Super Dog Fighter Decal
YOK-ZC-D4W
These Super Dog Fighter decals are reminiscent of the 80s. The lineup includes the same four colors as at the time: pink, red, white, and black, to match the body color.
CHF 5.90
Auf Lager  
+ −
Super Dog Fighter Decal
YOK-ZC-D4BK
These Super Dog Fighter decals are reminiscent of the 80s. The lineup includes the same four colors as at the time: pink, red, white, and black, to match the body color.
CHF 5.90
Auf Lager  
+ −
Lunsford 75mm Titanium Turn Buckle SD2.0
YOK-SD-TB75L
This 75mm size titanium turnbuckle is ideal for SD2.0 servo rods. Made by Lunsford, well-known for its robust products, it is lightweight and high-response.
CHF 13.90
Auf Lager  
+ −
Aluminum 4,5x17mm Rod End Adapter RD2.0
YOK-RD-008FA17
Rod end adapter for RD2.0 lower arm. Made of lightweight aluminum to reduce weight around the front. 3 sizes, 2pcs. each.
CHF 11.50
Auf Lager  
+ −
Aluminum 4.5x19mm Rod End Adapter RD2.0
YOK-RD-008FA19
Rod end adapter for RD2.0 lower arm. Made of lightweight aluminum to reduce weight around the front. 3 sizes, 2pcs. each.
CHF 11.50
Auf Lager  
+ −
Aluminum 4.5x21mm Rod End Adapter RD2.0
YOK-RD-008FA21
Rod end adapter for RD2.0 lower arm. Made of lightweight aluminum to reduce weight around the front. 3 sizes, 2pcs. each.
CHF 11.50
Auf Lager  
+ −
Teams Plastic Rear Chassis for SD2.0
YOK-Y2-002RP
This Teams brand part is made from resin for the rear chassis of the SD2.0 and provides flexible movement around the rear for increased traction. It is especially effective on low-traction road surfaces such as P-tiles, and its flexibility is not easily affected by road conditions.
CHF 11.50
Auf Lager  
+ −
Matte Graphite Support Plate YZ-870C
YOK-YZ-002SG
Graphite parts that further enhance the performance of the YZ-870c Super Dogfighter are now available. The lightweight and highly rigid graphite material has a matte black surface finish that does not detract from the machine's image. In addition to parts that upgrade existing FRP parts such as...
CHF 24.90
Auf Lager  
+ −
Matte Graphite Front Shock Tower YZ-870C
YOK-YZ-017G
Graphite parts that further enhance the performance of the YZ-870c Super Dogfighter are now available. The lightweight and highly rigid graphite material has a matte black surface finish that does not detract from the machine's image. In addition to parts that upgrade existing FRP parts such as...
CHF 26.50
Auf Lager  
+ −
Matte Graphite Rear Shock Tower YZ-870C
YOK-YZ-018G
Graphite parts that further enhance the performance of the YZ-870c Super Dogfighter are now available. The lightweight and highly rigid graphite material has a matte black surface finish that does not detract from the machine's image. In addition to parts that upgrade existing FRP parts such as...
CHF 32.90
Auf Lager  
+ −
Verfügbarkeit
Verfügbar beim Lieferanten
Abmessungen
Auswahlhilfe
Material
Preis
CHF
–
CHF
  • CHF 1.5
  • CHF 849
Reifen/Rad-Typ
Servo-Typ
Verwendung
Massstab
Motor / Antrieb
Einsatz
Anspruch
Lackierung
Fertigungsgrad
Max. Geschwindigkeit
Marke
Betriebsspannung