ERSATZTEIL-FINDER

Yokomo

Ordnen nach:
Empfohlen
48
Aluminum Upper Shock Cap Nut (2pcs) MS1.0
YOK-MS-S4C1
CHF7.90
Auf Lager  
+ −
Aluminum Shock O-Ring Cap (2pcs)
YOK-MS-S4C2
CHF6.90
Auf Lager  
+ −
Shock Cylinder (2pcs) MS1.0
YOK-MS-S4S
CHF17.90
Auf Lager  
+ −
Shock Shaft (19.1mm/ 2pcs) MS1.0
YOK-MS-S5S
CHF5.90
Auf Lager  
+ −
Linear Shock Springs (1.90/Red) MS1.0
YOK-MS-SSL190
CHF11.90
Auf Lager  
+ −
Steel Turnbuckle 13mm (2pcs) MS1.0
YOK-MS-TB13
CHF5.70
Nicht auf Lager
Linear Shock Springs (1.95/Yellow) MS1.0
YOK-MS-SSL195
CHF11.90
Auf Lager  
+ −
Linear Shock Springs (2.00/Blue) MS1.0
YOK-MS-SSL200
CHF11.90
Auf Lager  
+ −
Front Sway Bar Wire 1.0mm MS1.0
YOK-MS-412F0
CHF7.90
Auf Lager  
+ −
Front Sway Bar Wire 1.2mm MS1.0
YOK-MS-412F2
CHF7.90
Auf Lager  
+ −
Rear Sway Bar Wire 1.0mm MS1.0
YOK-MS-412R0
CHF7.90
Auf Lager  
+ −
Rear Sway Bar Wire 1.2mm MS1.0
YOK-MS-412R2
CHF7.90
Auf Lager  
+ −
Light Buckets für Mercury Sayka 1:10 klar
YOK-SD-MS15L
CHF15.90
Auf Lager  
+ −
Light Buckets für Pandem GR86
YOK-SD-GR86L
CHF15.90
Auf Lager  
+ −
Front Universal Bone (73mm/1pcs)
YOK-MO-010FWB
CHF7.90
Nicht auf Lager
Front Double Joint Universal Maintenance Kit
YOK-MO-010WM
CHF11.90
Nicht auf Lager
Brass front weight for MS1.0 (10g x 2)
YOK-MS-BWF10
This is a front ballast weight of 10g per side that can be used for MS1.0. Made of heavy brass, it effectively utilizes the tight space inside the suspension arms to increase front traction during acceleration. The contact area to the chassis is also minimized so as not to spoil the flex of the...
CHF17.90
Auf Lager  
+ −
Mirror for Lexus RC-F
YOK-SP-LFGT3A
Plastic mirror set that just fits LEXUS RC-F GT3 body for touring cars.
CHF6.90
Auf Lager  
+ −
M2x10mm BH Screw (10 pcs)
YOK-ZC-BH210
Button head screws 2mm thick and 10mm long. 10pcs.
CHF2.50
Auf Lager  
+ −
Aluminum Front Bulkhead Bridge RD2.0/SD2.0
YOK-RD-302FB
This aluminum front bulkhead bridge is recommended for RD2.0 and SD2.0. It increases the rigidity of the front area and improves the stability of the front section when diving into and coming out of corners, and increases the freedom of the driving line. The shoulder section has been...
CHF27.90
Auf Lager  
+ −
Aluminum Rear Shock Lower Adapter RD2.0
YOK-RD-008RS
This Aluminum mounting Adapter holds the lower rear shock of the RD2.0. By increasing the rigidity of the shock mounting, it improves operationg precision and increaser road-following performance against minor vibrations. It is also heavier than the standard plastic one, which tends to increase...
CHF23.90
Auf Lager  
+ −
Aluminum suspension mount "E" for RD2.0
YOK-RD-301AE
Aluminum suspension mount for RD2.0. Shaped to fit the RD2.0 suspension mount, which has a rearward gearbox position, this mount increases suspension rigidity for reliable operation and improved traction. The width of the suspension mount is a D width that can be set in the same range as the...
CHF27.90
Auf Lager  
+ −
F5.5mm Titanium Rod End Balls (2 each) 6mm
YOK-RP-114-06
F5.5mm size rod end balls used in Yokomo's off-road cars are manufactured with titanium material. It can reduce weight at the tie rod and upper rod section, and is especially effective in improving steering response and dynamic performance on high-grip surfaces.
CHF9.90
Auf Lager  
+ −
F5.5mm Titanium Rod End Balls (2 each) 8mm
YOK-RP-114-08
F5.5mm size rod end balls used in Yokomo's off-road cars are manufactured with titanium material. It can reduce weight at the tie rod and upper rod section, and is especially effective in improving steering response and dynamic performance on high-grip surfaces.
CHF9.90
Nicht auf Lager
F5.5mm Titanium Rod End Balls (2 each) 10mm
YOK-RP-114-10
F5.5mm size rod end balls used in Yokomo's off-road cars are manufactured with titanium material. It can reduce weight at the tie rod and upper rod section, and is especially effective in improving steering response and dynamic performance on high-grip surfaces.
CHF9.90
Auf Lager  
+ −
F5.5mm Titanium Rod End Balls (2 each) 12mm
YOK-RP-114-12
F5.5mm size rod end balls used in Yokomo's off-road cars are manufactured with titanium material. It can reduce weight at the tie rod and upper rod section, and is especially effective in improving steering response and dynamic performance on high-grip surfaces.
CHF9.90
Auf Lager  
+ −
SO1.0/2.0 Graphite molded Gearbox Cap
YOK-Z2-302CTG
Rear bulk cap and differential height adapter for SO series 2WD off-road vehicles. It is made of graphite-mixed resin, which is harder than standard, to increase stability around the rear.
CHF16.90
Auf Lager  
+ −
Wing for Mercury Sayaka Special S15
YOK-SD-MS15W
This is a spare wing set for MERCURY SAYAKA SPECIAL S15. Made of polycarbonate, the set includes the wing body, side dams, front canards, and side canards. Wing stay is not included. Please prepare aluminum wing stay (D-057LA etc.) separately.
CHF15.90
Auf Lager  
+ −
Linear Shock Spring 1.80 Purple for MS1.0
YOK-MS-SSL180
These springs are softer than the MS1.0 standard springs. Effective for outdoor asphalt surfaces where you want more traction. Try a combination of 1.80 in the front and 1.85 in the rear.
CHF11.90
Auf Lager  
+ −
Linear Shock Spring 1.85 White for MS1.0
YOK-MS-SSL185
These springs are softer than the MS1.0 standard springs. Effective for outdoor asphalt surfaces where you want more traction. Try a combination of 1.80 in the front and 1.85 in the rear.
CHF11.90
Auf Lager  
+ −
Blank piston for SO/MO f13mm Shock 1.5mm thick
YOK-S4-SB1315
Blank pistons for off-road f13mm shocks, available in three different thicknesses from 1.5 to 2.5 mm, with thinner pistons operating softer and thicker ones tasting more hip. Piston holes can be drilled freely with a pin vise, etc. but guide marks are provided so that 2 to 6 holes can be...
CHF7.90
Auf Lager  
+ −
Blank piston for SO/MO f13mm Shock 2mm thick
YOK-S4-SB1320
Blank pistons for off-road f13mm shocks, available in three different thicknesses from 1.5 to 2.5 mm, with thinner pistons operating softer and thicker ones tasting more hip. Piston holes can be drilled freely with a pin vise, etc. but guide marks are provided so that 2 to 6 holes can be...
CHF7.90
Auf Lager  
+ −
Blank piston for SO/MO f13mm Shock 2.5mm thick
YOK-S4-SB1325
Blank pistons for off-road f13mm shocks, available in three different thicknesses from 1.5 to 2.5 mm, with thinner pistons operating softer and thicker ones tasting more hip. Piston holes can be drilled freely with a pin vise, etc. but guide marks are provided so that 2 to 6 holes can be...
CHF7.90
Auf Lager  
+ −
2.2-inch Wheel for YZ-870C Front (White)
YOK-YZ-821W-2
The YZ-870C's large-diameter 2.2-inch wheels are now available in a new white color, allowing the use of current 2.2-inch size tires while retaining the YZ-870C's distinctive wheel hubs, making it possible to choose the best tires from a varied lineup for a variety of surfaces! The...
CHF8.90
Auf Lager  
+ −
2.2-inch Wheel for YZ-870C Rear (White)
YOK-YZ-827W-2
The YZ-870C's large-diameter 2.2-inch wheels are now available in a new white color, allowing the useof current 2.2-inch size tires while retaining the YZ-870C's distinctivewheel hubs, making it possible to choose the best tires from a variedlineup for a variety of surfaces! The...
CHF9.90
Auf Lager  
+ −
MO2.0 Axle for Double Joint Universal
YOK-MO-010FWA
Replacement axle for front double-joint universal released as an optional part for MO2.0. 1 piece.
CHF6.90
Auf Lager  
+ −
Caster Measuring Jig for MS1.0
YOK-YT-CMJ
This tool is attached to the steering block to facilitate caster measurement when measuring MS1.0 alignment. Compatible with various touring car alignment gauges.
CHF10.30
Auf Lager  
+ −
Front Wheel (Yellow) 2.2 inch for YZ-870C
YOK-YZ-821Y-2
The YZ-870C's distinctive wheel hubs are retained, but the wheel outer diameter is increased to allow the use of 2.2-inch size tires, which are widely available on the market today. This greatly expands the tire options for both dirt and carpet surfaces, allowing you to enjoy driving with...
CHF8.90
Auf Lager  
+ −
Rear Wheel (Yellow) 2.2 inch for YZ-870C
YOK-YZ-827Y-2
The YZ-870C's distinctive wheel hubs are retained, but the wheel outer diameter is increased to allow the use of 2.2-inch size tires, which are widely available on the market today. This greatly expands the tire options for both dirt and carpet surfaces, allowing you to enjoy driving with...
CHF9.90
Auf Lager  
+ −
Alu Shim 3x6x4 (Black, 8pcs)
YOK-ZC-A3640B
These aluminum spacers are even thicker than conventional ones. Even when the same thickness is used, it provides greater strength and precision than stacking multiple pieces. They are available in three thicknesses ranging from 4 mm to 6 mm, each containing 8 pieces.
CHF5.90
Auf Lager  
+ −
Alu Shim 3x6x5 (Black, 8pcs)
YOK-ZC-A3650B
These aluminum spacers are even thicker than conventional ones. Even when the same thickness is used, it provides greater strength and precision than stacking multiple pieces. They are available in three thicknesses ranging from 4 mm to 6 mm, each containing 8 pieces.
CHF5.90
Auf Lager  
+ −
Alu Shim 3x6x6 (Black, 8pcs)
YOK-ZC-A3660B
These aluminum spacers are even thicker than conventional ones. Even when the same thickness is used, it provides greater strength and precision than stacking multiple pieces. They are available in three thicknesses ranging from 4 mm to 6 mm, each containing 8 pieces.
CHF5.90
Auf Lager  
+ −
Graphite Lightweight front lower suspension Arm
YOK-B12-008FR
Graphite Lightweight front lower suspension arm (right) +0.5mm for BD12/11 This lightweight graphite suspension arm has been made lighter than before by changing the cut line, and has further improved maneuverability and traction. Compared to the standard suspension arm of the BD12, it is...
CHF36.90
Auf Lager  
+ −
Titanium Turnbuckle 65mm (2pcs)
YOK-ZC-TB65T
This Turnbuckle can be titaniumized to fit each car. The Weight of the rod is reduced, which is effective in improving driving performance.
CHF12.80
Auf Lager  
+ −
Titanium Turnbuckle 75mm (1pcs)
YOK-ZC-TB75T
This Turnbuckle can be titaniumized to fit each car. The Weight of the rod is reduced, which is effective in improving driving performance.
CHF14.80
Auf Lager  
+ −
Turnbuckle Upper Arm Rod End for MS1.0
YOK-MS-008TR
This is a replacement plastic part for the turnbuckle upper arm, an optional part for MS1.0
CHF9.90
Auf Lager  
+ −
O-Ring for YZ-870C Shock Cap 2mm (8pcs)
YOK-YS-7B2
O-rings for drain screws used on aluminum shock caps for YZ-870C.The inner diameter is F2mm and comes in packs of 8.
CHF3.40
Auf Lager  
+ −
Steel M3 Flanged Lock Nut (4pcs)
YOK-ZC-N3FLS
A 3mm steel flange nut. The back of the flange has a serrated groove, allowing you to securely lock plastic parts. Pack of 4.
CHF3.40
Auf Lager  
+ −
Verfügbarkeit
Verfügbar beim Lieferanten
Abmessungen
Auswahlhilfe
Material
Preis

CHF  –  CHF

  • ‎CHF1.5
  • ‎CHF949
Reifen/Rad-Typ
Servo-Typ
Verwendung
Massstab
Motor / Antrieb
Einsatz
Anspruch
Lackierung
Fertigungsgrad
Max. Geschwindigkeit
Marke
Betriebsspannung
Zurücksetzen (reset)