ERSATZTEIL-FINDER

Yokomo

Trier par:
Recommandé
48
Aluminum cramp servo horn 20mm (for FUTABA)
YOK-ZC-204520A
entspricht: ZC-204520
CHF17.90
En stock  
+ −
DX1R series Brushless motor (10.5T) purple
YOK-RPM-DX105RP
The DX1 Type-R motor, one of the most popular brushless motors for drifting, is now available in a new color anodized version! The two color variations are of course red anodized and purple anodized, which best match the YD-2 series, and of course, match the chassis perfectly. This is a...
CHF119.90
En stock  
+ −
SD1.0/YD-2Z/YD-2ZS Alu Chassis
YOK-Y2-002AL
This aluminum main chassis is used as the standard chassis in SD1.0, and its 2.0mm thickness provides high rigidity and stability. It also provides more traction to the front, resulting in better control on corner exits and preventing understeer, which can cause significant demerit...
CHF119.90
En stock  
+ −
Rear“X30”shock set
YOK-S4-S1LA
entspricht: S4-S1L
CHF69.90
En stock  
+ −
Rear X Shock Ver II Set
YOK-B2-S1L
 
CHF59.90
En stock  
+ −
Front X Shock Ver II Set
YOK-B2-S1S
 
CHF59.90
En stock  
+ −
Karosserie YZ4-SF
YOK-S4-101A
entspricht: S4-101
CHF34.90
En stock  
+ −
Aluminum front lower A arm for 2WD DRIFT Conv.
YOK-D-164
 
CHF59.90
En stock  
+ −
Program card for SP-02DV2/SP-03DV2 servo
YOK-SP-03DPC-1
This is a dedicated programmer that can be connected to programmable servos such as SP-02DV2/SP-03DV2 for drifting and rewrite settings. The main unit is powered from a USB connector, etc., and by connecting the servo cable directly, the power, torque, hunting suppression value,...
CHF34.90
En stock  
+ −
Karosserie Set Pandem GR86 1:10 klar
YOK-SD-GR86B
The Toyota GR86, one of the most popular sports cars, is now available in a new body set with PANDEM specifications that are fearlessly finished with powerful over fenders. The body width is set at approximately 200mm, which can be used for drifting and also for speed driving,...
MaterialLexan Auswahlhilfe190mm Touring Massstab1:10 EinsatzOn-Road Drift Lackierungunlackiert
CHF59.90
En stock  
+ −
Rear Wheel (White)
YOK-B4-827WA
entspricht: B4-827W
CHF5.20
En stock  
+ −
Alu Rear Weight H Arm Blau für RD2.0/SD2.0
YOK-Y2-BL8RAW
CHF59.90
En stock  
+ −
Alu Rear Weight H Arm Rot für RD2.0/SD2.0
YOK-Y2-R08RAW
CHF59.90
En stock  
+ −
Alu Shim 3x6x1.0mm (Black)
YOK-ZC-A3610BA
entspricht: ZC-A3610B
CHF5.90
En stock  
+ −
Body Set (with Masking) Super Dog Fighter Works 91
YOK-YZ-101W1
CHF59.90
En stock  
+ −
Main chassis for MR/RS
YOK-B2-002MR
 
CHF39.90
En stock  
+ −
Univ. Drive Shaft 49mm YD-2
YOK-Y2-010A
entspricht: Y2-010
CHF32.50
En stock  
+ −
Universal shaft for YZ-2T
YOK-Z2-01075TA
entspricht: Z2-01075T
CHF39.90
En stock  
+ −
Alu High mount upper mount spacer
YOK-Y2-202USL
CHF39.90
En stock  
+ −
Graphite Front ST Hub Carieer BD9/BD10
YOK-B9-413GA
entspricht: B9-413G
CHF14.90
En stock  
+ −
Graphite battery holder for MR/RS Midship
YOK-B2-118MA
 
CHF29.90
En stock  
+ −
Alu Front Susp.Mount for BD7 (Rear side 43.5mm)
YOK-B7-3135FR
the new block has increased steering response as well as
CHF23.90
En stock  
+ −
6 mm Rear wheel hub
YOK-Z2-011R6A
entspricht: Z2-011R6
CHF12.50
En stock  
+ −
Flex Gear Differential Oil(35cc) DOT1
YOK-CS-DOT1
Oel-Vergleichstabelle #650 = DOT1 #800 = DOT2 #1000 = DOT3 #1200 = DOT4 #1600 = DOT5 #2100 = DOT6 #3000 = DOT7
CHF11.90
En stock  
+ −
Plastic Bevel Gear Dif Assy (with Aluminum Drive c
YOK-Y2-500GSAA
entspricht: Y2-500GSA
CHF49.90
Rupture de stock
Karosserie 1:10 FWD Type-A
YOK-SP-FWDABA
A polycarbonate FWD touring car body Type-A that matches the 1/10 size FWD touring car category held around the world. The wide overfender creates strength, and the short overhang and front nose spoiler provide high exercise performance. In addition, it is equipped with a large rear wing to...
MaterialLexan AuswahlhilfeFWD 1:10 Massstab1:10 EinsatzOn-Road Lackierungunlackiert
CHF57.90
En stock  
+ −
Alu Main Shaft (Anodized) YZ-4
YOK-Z4-644H
 
CHF8.90
En stock  
+ −
Gear Differential Set
YOK-B9-500GS
(38T)
CHF49.90
En stock  
+ −
Racing performer Rotor M4 D12.2 x d7.25 titan
YOK-RP-095A
entspricht: RP-095
CHF57.50
En stock  
+ −
Slide Rack Set (Center Clank) for RD2.0
YOK-RD-202SC
This slide rack set can be bolted on to the RD2.0.The servo can be mounted closer to the rear via the center crank, increasing the rear load and stability.
CHF134.90
Rupture de stock
Racing Performer Rotor M4 D12.5 x 7.25 titan
YOK-RP-096A
entspricht: RP-096
CHF57.50
En stock  
+ −
Alu Transmission Case edge trimmed YD-4
YOK-Y4-302C
 
CHF114.90
En stock  
+ −
SLF Aluminum Big Bore shock set (Purple) for YD-2
YOK-Y2-SBBSPA
Super low friction aluminum big bore shock set for YD-2. The cylinder diameter is wider than the conventional shock, and the shock length is also newly designed for drifting. The maximum capacity for on-road shocks enhances the sense of stability. The cylinder is also treated with Kashima Coat...
CHF89.90
Rupture de stock
Alu Center Mount (Chamfer) YZ-4
YOK-Z4-304LC
 
CHF22.90
En stock  
+ −
Graphite Rear Shock Tower SO3.0
YOK-SO-018
CHF22.90
En stock  
+ −
YZ-4SF Light Wheigt Body (J-Concept)
YOK-S4-101LWA
entspricht: S4-101LW
CHF37.90
En stock  
+ −
Front & Rear Shock Tower/Spacer YZ-4
YOK-Z4-017
 
CHF18.90
En stock  
+ −
Graphite Front Shock Tower YZ4-SF
YOK-S4-017A
entspricht: S4-017
CHF18.90
En stock  
+ −
Graphite Front Upper Arm YR-10U
YOK-YR-10U
CHF18.90
En stock  
+ −
Aluminum bulk head mount for YZ-2 series
YOK-Z2-018BMAA
entspricht: Z2-018BMA
CHF56.50
En stock  
+ −
Alu steering hub carrier für YZ-4SF2
YOK-S4-41306A
An aluminum front steering hub carrier that further enhances the cornering performance of YZ-4SF2 on high grip road surfaces such as carpets or artificial grass. Comparing with standard caster angle (8 degrees), the caster angle of 6 degrees is specialized for high grip road surfaces....
CHF52.90
En stock  
+ −
Alu Chassis US Spec für BD12
YOK-B12-002AU
Aluminum main chassis for the BD12 competition touring car. It is a highly rigid US specification with little wall removal, making it ideal for high-grip carpeted surfaces. The center of gravity is lowered, which is also effective as a high-side countermeasure.
CHF112.90
En stock  
+ −
Alu Steering Bell Crank für 2WD Drift
YOK-D-163
 
CHF55.90
En stock  
+ −
Metal gear diff kit (High capacity) for YZ-2 serie
YOK-Z2-500MG3A
High capacity
CHF43.90
En stock  
+ −
Motor Mount für PCS
YOK-B8-302M2
 
CHF55.90
En stock  
+ −
YD-2/BD8 Brass Sus holder C (46.4~49.6mm)
YOK-TS-2151
Please be announced the new items made by brass for BD-8 and YD-2 series. This new suspension holder has released under Team Suzuki brand. It is the same shape but made by brass for gaining more weight to be functioned as vehicle weight balance items. By replacing with the standard...
CHF27.90
En stock  
+ −
Center Balance Weight
YOK-B9-BW50A
50g
CHF27.90
En stock  
+ −
Alu Rear Suspension Mount in Rear (w. S4-300BS)
YOK-Z2-300RR4A
entspricht: Z2-300RR4
CHF22.90
En stock  
+ −
Verfügbarkeit
Verfügbar beim Lieferanten
Abmessungen
Auswahlhilfe
Material
Prix

CHF  –  CHF

  • ‎CHF1.5
  • ‎CHF999
Reifen/Rad-Typ
Servo-Typ
Verwendung
Massstab
Motor / Antrieb
Einsatz
Anspruch
Lackierung
Fertigungsgrad
Max. Geschwindigkeit
Marke
Betriebsspannung
Effacer