Français (CH)
ERSATZTEIL-FINDER

Yokomo

Trier par:
Recommandé
Montrer:
48
Graphite Front Lower Arm YR-10L
YOK-YR-10L
CHF 18.90
En stock  
+ −
Rear Wheel (White)
YOK-B4-827WA
entspricht: B4-827W
AuswahlhilfeBuggy MaterialKunststoff Reifen/Rad-TypFelgen Massstab1:10 EinsatzOff-Road
CHF 5.20
En stock  
+ −
Graphite Front Upper Arm YR-10U
YOK-YR-10U
CHF 18.90
En stock  
+ −
Metal gear diff kit (High capacity) for YZ-2 serie
YOK-Z2-500MG3A
High capacity
CHF 43.90
En stock  
+ −
Aluminum Rear Hub Carrier RTC BD11
YOK-B11-RTC-3
Aluminum rear hub carrier that can be used for BD10/11. It is a hub carrier for the RTC (rear toe control system) that is standard on the BD11, and by setting the angle of the kingpin to 4 degrees, which is an increase from the standard reverse caster 2 degrees, it is possible to control...
CHF 43.90
En stock  
+ −
Rear“X30”shock set
YOK-S4-S1LA
entspricht: S4-S1L
CHF 69.90
En stock  
+ −
Aluminium Center Pulley 21T MS2.0
YOK-MS-630-2
CHF 43.90
En stock  
+ −
Alu Front Bumper Brace YD2/YD4
YOK-Y2-001BA
 
CHF 32.90
En stock  
+ −
Bearing F5 x F10 x 4mm
YOK-BB-105-2A
entspricht: BB-105-2
CHF 6.90
En stock  
+ −
Titanium Screw Set for SO2.0
YOK-RP-115
This set allows the 104 screws used in the Super Off-Road SO2.0 to be made of titanium. All titanium screws are manufactured by high-precision cutting, so they are well finished when the machine is assembled, allowing for a solid machine build.
CHF 129.90
En stock  
+ −
Front double joint univ. shaft (with Bearing) YZ-4
YOK-Z4-010FW
 
CHF 64.90
En stock  
+ −
Program card for SP-02DV2/SP-03DV2 servo
YOK-SP-03DPC-1
This is a dedicated programmer that can be connected to programmable servos such as SP-02DV2/SP-03DV2 for drifting and rewrite settings. The main unit is powered from a USB connector, etc., and by connecting the servo cable directly, the power, torque, hunting suppression value,...
CHF 34.90
En stock  
+ −
Front Double Joint Universal Shaft (73mm)
YOK-MO-010FW
This is a front double-joint universal shaft for MO1.0/2.0. On high-grip surfaces, for example, the steering is often run at full steering angle, which places a heavy load on the universal shaft. In particular, when joints are operated at an angle, the viewpoint is spoiled and the risk of wear...
CHF 64.90
En stock  
+ −
Alu rear hub carrier (Toe-in 1.0°) for B-MAX4III
YOK-B4-415R10
 
CHF 42.90
En stock  
+ −
Univ. Drive Shaft 49mm YD-2
YOK-Y2-010A
entspricht: Y2-010
CHF 32.50
En stock  
+ −
Graphite Molded Front Bulkhead for RO/SO
YOK-Z2-002BG
This stabilizer set controls the roll of the RS1.0 and improves its turning performance on high-grip surfaces and other surfaces to enhance driving performance. It comes as a front and rear set, with 3 types of stabilizer bars from 1.2mm to 1.4mm, so you can enjoy setting it up according to the...
CHF 12.80
En stock  
+ −
Aluminium Servohalter MS2.0
YOK-MS-203-2
CHF 63.90
En stock  
+ −
Graphite Front ST Hub Carieer BD9/BD10
YOK-B9-413GA
entspricht: B9-413G
CHF 14.90
En stock  
+ −
Steering Limiter Screw 8/8.5/9 stck je
YOK-B7-201LS
CHF 21.00
En stock  
+ −
Alu Rear Suspension Mount in Rear (w. S4-300BS)
YOK-Z2-300RR4A
entspricht: Z2-300RR4
CHF 22.90
En stock  
+ −
Alu Transmission Case (edge trimmed) upper YD-4
YOK-Y4-302UC
 
CHF 62.90
En stock  
+ −
Gear Differential Set
YOK-B9-500GS
(38T)
CHF 49.90
En stock  
+ −
Center gear diff set for YZ-4SF2
YOK-S4-504-2A
entspricht: S4-504-2
CHF 62.90
En stock  
+ −
“X30” 13 shock set (rear)
YOK-S4-S1L13
This is a F13mm big bore shock set. The L size is ideal for the rear of the SO/MO series, and the shaft diameter is 3.0mm.
CHF 62.90
En stock  
+ −
SLF Aluminum Big Bore shock set for YD-2
YOK-Y2-SBBSA
Super low friction aluminum big bore shock set for YD-2. The cylinder diameter is wider than the conventional shock, and the shock length is also newly designed for drifting. The maximum capacity for on-road shocks enhances the sense of stability. The cylinder is also treated with Kashima Coat...
CHF 89.90
En stock  
+ −
Full counter solid axle set (Rear×1.5/Blue)
YOK-IB-FCD15
 
CHF 41.90
En stock  
+ −
Bell Crank (8x5 bearing assembled)
YOK-B7-202SBA
 
CHF 41.90
En stock  
+ −
3×6×2.0mm Alu Shim (8pcs·Black)
YOK-ZC-A3620BA
entspricht: ZC-A3620B
CHF 5.90
En stock  
+ −
Alu Chassis für BDFWD/BD10F
YOK-BD-002FA
CHF 124.90
En stock  
+ −
YZ-4SF Light Wheigt Body (J-Concept)
YOK-S4-101LWA
entspricht: S4-101LW
CHF 37.90
En stock  
+ −
Alum.Steering Block Set (2pcs.) for MS1.0
YOK-MS-415AS
This aluminum steering block improves machine response and traction by replacing the plastic steering block.Graphite arm plates provide ample rigidity, and by replacing the plates up and down, various bump steer settings are possible. Each product comes in a pack of two, but the aluminum...
CHF 61.60
En stock  
+ −
Graphite Front Shock Tower YZ4-SF
YOK-S4-017A
entspricht: S4-017
CHF 18.90
En stock  
+ −
Front/Rear Sway Bar Set for RS1.0
YOK-RS-412
This stabilizer set controls the roll of the RS1.0 and improves its turning performance on high-grip surfaces and other surfaces to enhance driving performance. It comes as a front and rear set, with 3 types of stabilizer bars from 1.2mm to 1.4mm, so you can enjoy setting it up according to the...
CHF 41.00
En stock  
+ −
Carbon Graphite main chassis YD-4MR
YOK-Y4-002MR
 
CHF 119.90
En stock  
+ −
SD1.0/YD-2Z/YD-2ZS Alu Chassis
YOK-Y2-002AL
This aluminum main chassis is used as the standard chassis in SD1.0, and its 2.0mm thickness provides high rigidity and stability. It also provides more traction to the front, resulting in better control on corner exits and preventing understeer, which can cause significant demerit...
CHF 119.90
En stock  
+ −
Alu steering hub carrier für YZ-4SF2
YOK-S4-41306A
An aluminum front steering hub carrier that further enhances the cornering performance of YZ-4SF2 on high grip road surfaces such as carpets or artificial grass. Comparing with standard caster angle (8 degrees), the caster angle of 6 degrees is specialized for high grip road surfaces....
CHF 52.90
En stock  
+ −
Rear X Shock Ver II Set
YOK-B2-S1L
 
CHF 59.90
En stock  
+ −
Front X Shock Ver II Set
YOK-B2-S1S
 
CHF 59.90
En stock  
+ −
Front susp. arm(TypeB/2hole/F3.5pin) for YZ-4SF2
YOK-S4-008F2A
entspricht: S4-008F2
CHF 12.50
En stock  
+ −
Karosserie Set Pandem GR86 1:10 klar
YOK-SD-GR86B
The Toyota GR86, one of the most popular sports cars, is now available in a new body set with PANDEM specifications that are fearlessly finished with powerful over fenders. The body width is set at approximately 200mm, which can be used for drifting and also for speed driving,...
Auswahlhilfe190mm Touring MaterialLexan Massstab1:10 EinsatzOn-Road Drift Lackierungunlackiert
CHF 59.90
En stock  
+ −
Alu Rear Weight H Arm Blau für RD2.0/SD2.0
YOK-Y2-BL8RAW
CHF 59.90
En stock  
+ −
Front“X30”shock shaft (Titanium coat)
YOK-S4-S2STA
entspricht: S4-S2ST
CHF 15.90
En stock  
+ −
Alu Rear Weight H Arm Purple für RD2.0/SD2.0
YOK-Y2-P08RAW
CHF 59.90
En stock  
+ −
Alu Rear Weight H Arm Rot für RD2.0/SD2.0
YOK-Y2-R08RAW
CHF 59.90
En stock  
+ −
Aluminum Special Servo Mount
YOK-B7-203B
 
CHF 39.90
En stock  
+ −
Body Set (with Masking) Super Dog Fighter Works 91
YOK-YZ-101W1
CHF 59.90
En stock  
+ −
Aluminum Rear Hub Carrier Purple für RD2.0/SD3.0
YOK-RD-415ARP
Aluminum rear hub carrier for RD/SD series. It is more rigid than the standard plastic one, and improves rear traction and slide control. Upper arm fixing positions allow for more precise adjustment of camber change due to suspension stroke. The lower suspension arm pins can also be selected from...
CHF 59.90
En stock  
+ −
J Concept F2 Truck body for YZ-2T
YOK-Z2-101TA
entspricht: Z2-101T
AuswahlhilfeTruck Massstab1:10 EinsatzOff-Road Lackierungunlackiert HerstellerYokomo
CHF 57.50
En stock  
+ −
Verfügbarkeit
Verfügbar beim Lieferanten
Abmessungen
Auswahlhilfe
Material
Prix
CHF
–
CHF
  • CHF 1.5
  • CHF 849
Reifen/Rad-Typ
Servo-Typ
Verwendung
Massstab
Motor / Antrieb
Einsatz
Anspruch
Lackierung
Fertigungsgrad
Max. Geschwindigkeit
Marke
Betriebsspannung