ERSATZTEIL-FINDER

Yokomo

Trier par:
Recommandé
48
Graphite Molded Front Bulkhead for RO/SO
YOK-Z2-002BG
This stabilizer set controls the roll of the RS1.0 and improves its turning performance on high-grip surfaces and other surfaces to enhance driving performance. It comes as a front and rear set, with 3 types of stabilizer bars from 1.2mm to 1.4mm, so you can enjoy setting it up according to the...
CHF12.80
En stock  
+ −
Rear“X30”shock set
YOK-S4-S1LA
entspricht: S4-S1L
CHF69.90
En stock  
+ −
Steering Limiter Screw 8/8.5/9 stck je
YOK-B7-201LS
CHF21.00
En stock  
+ −
Alu Transmission Case (edge trimmed) upper YD-4
YOK-Y4-302UC
 
CHF62.90
En stock  
+ −
“X30” 13 shock set (rear)
YOK-S4-S1L13
This is a F13mm big bore shock set. The L size is ideal for the rear of the SO/MO series, and the shaft diameter is 3.0mm.
CHF62.90
En stock  
+ −
Program card for SP-02DV2/SP-03DV2 servo
YOK-SP-03DPC-1
This is a dedicated programmer that can be connected to programmable servos such as SP-02DV2/SP-03DV2 for drifting and rewrite settings. The main unit is powered from a USB connector, etc., and by connecting the servo cable directly, the power, torque, hunting suppression value,...
CHF34.90
En stock  
+ −
Full counter solid axle set (Rear×1.5/Blue)
YOK-IB-FCD15
 
CHF41.90
En stock  
+ −
Bell Crank (8x5 bearing assembled)
YOK-B7-202SBA
 
CHF41.90
En stock  
+ −
Univ. Drive Shaft 49mm YD-2
YOK-Y2-010A
entspricht: Y2-010
CHF32.50
En stock  
+ −
Alu Chassis für BDFWD/BD10F
YOK-BD-002FA
CHF124.90
En stock  
+ −
Alum.Steering Block Set (2pcs.) for MS1.0
YOK-MS-415AS
This aluminum steering block improves machine response and traction by replacing the plastic steering block.Graphite arm plates provide ample rigidity, and by replacing the plates up and down, various bump steer settings are possible. Each product comes in a pack of two, but the aluminum...
CHF61.60
En stock  
+ −
Graphite Front ST Hub Carieer BD9/BD10
YOK-B9-413GA
entspricht: B9-413G
CHF14.90
En stock  
+ −
Carbon Graphite main chassis YD-4MR
YOK-Y4-002MR
 
CHF119.90
En stock  
+ −
SD1.0/YD-2Z/YD-2ZS Alu Chassis
YOK-Y2-002AL
This aluminum main chassis is used as the standard chassis in SD1.0, and its 2.0mm thickness provides high rigidity and stability. It also provides more traction to the front, resulting in better control on corner exits and preventing understeer, which can cause significant demerit...
CHF119.90
En stock  
+ −
Alu Rear Suspension Mount in Rear (w. S4-300BS)
YOK-Z2-300RR4A
entspricht: Z2-300RR4
CHF22.90
En stock  
+ −
Rear X Shock Ver II Set
YOK-B2-S1L
 
CHF59.90
En stock  
+ −
Front X Shock Ver II Set
YOK-B2-S1S
 
CHF59.90
En stock  
+ −
Gear Differential Set
YOK-B9-500GS
(38T)
CHF49.90
En stock  
+ −
Karosserie Set Pandem GR86 1:10 klar
YOK-SD-GR86B
The Toyota GR86, one of the most popular sports cars, is now available in a new body set with PANDEM specifications that are fearlessly finished with powerful over fenders. The body width is set at approximately 200mm, which can be used for drifting and also for speed driving,...
MaterialLexan Auswahlhilfe190mm Touring Massstab1:10 EinsatzOn-Road Drift Lackierungunlackiert
CHF59.90
En stock  
+ −
V4 Steering Gyro Blue Version
YOK-DPP-302V4BL
This is the blue version of the V3 Gyro, which is used by a high percentage of top drivers. Four modes are provided for different levels of operation, allowing you to select the level of interference with which the gyro will operate. Endponts can also be set for easy adjustment to your...
CHF59.90
En stock  
+ −
Bearing F5 x F10 x 4mm
YOK-BB-105-2A
entspricht: BB-105-2
CHF6.90
En stock  
+ −
Alu Rear Weight H Arm Blau für RD2.0/SD2.0
YOK-Y2-BL8RAW
CHF59.90
En stock  
+ −
Alu Rear Weight H Arm Rot für RD2.0/SD2.0
YOK-Y2-R08RAW
CHF59.90
En stock  
+ −
SLF Aluminum Big Bore shock set for YD-2
YOK-Y2-SBBSA
Super low friction aluminum big bore shock set for YD-2. The cylinder diameter is wider than the conventional shock, and the shock length is also newly designed for drifting. The maximum capacity for on-road shocks enhances the sense of stability. The cylinder is also treated with Kashima Coat...
CHF89.90
En stock  
+ −
Body Set (with Masking) Super Dog Fighter Works 91
YOK-YZ-101W1
CHF59.90
En stock  
+ −
Aluminum Rear Hub Carrier Black für RD2.0/SD3.0
YOK-RD-415AR
Aluminum rear hub carrier for RD/SD series. It is more rigid than the standard plastic one, and improves rear traction and slide control. Upper arm fixing positions allow for more precise adjustment of camber change due to suspension stroke. The lower suspension arm pins can also be selected from...
CHF59.90
En stock  
+ −
SLF Aluminum Big Bore shock set (Purple) for YD-2
YOK-Y2-SBBSPA
Super low friction aluminum big bore shock set for YD-2. The cylinder diameter is wider than the conventional shock, and the shock length is also newly designed for drifting. The maximum capacity for on-road shocks enhances the sense of stability. The cylinder is also treated with Kashima Coat...
CHF89.90
En stock  
+ −
Aluminum Rear Hub Carrier Purple für RD2.0/SD3.0
YOK-RD-415ARP
Aluminum rear hub carrier for RD/SD series. It is more rigid than the standard plastic one, and improves rear traction and slide control. Upper arm fixing positions allow for more precise adjustment of camber change due to suspension stroke. The lower suspension arm pins can also be selected from...
CHF59.90
En stock  
+ −
Aluminum Rear Hub Carrier Red für RD2.0/SD3.0
YOK-RD-415ARR
Aluminum rear hub carrier for RD/SD series. It is more rigid than the standard plastic one, and improves rear traction and slide control. Upper arm fixing positions allow for more precise adjustment of camber change due to suspension stroke. The lower suspension arm pins can also be selected from...
CHF59.90
En stock  
+ −
YZ-4SF Light Wheigt Body (J-Concept)
YOK-S4-101LWA
entspricht: S4-101LW
CHF37.90
En stock  
+ −
Main chassis for MR/RS
YOK-B2-002MR
 
CHF39.90
En stock  
+ −
Universal shaft for YZ-2T
YOK-Z2-01075TA
entspricht: Z2-01075T
CHF39.90
En stock  
+ −
Graphite Front Shock Tower YZ4-SF
YOK-S4-017A
entspricht: S4-017
CHF18.90
En stock  
+ −
Alu High mount upper mount spacer
YOK-Y2-202USL
CHF39.90
En stock  
+ −
Aluminium / Graphite Servo Halterung für RS2.0
YOK-RS-203AS
This servo mount is a hybrid structure that enhances the steering response of the RS2.0. The stay connecting it to the chassis is made of aluminum, and a lightweight graphite plate is used on the upper side of the chassis to prevent excessive changes in the center of gravity. The servo itself is...
CHF39.90
En stock  
+ −
Alu steering hub carrier für YZ-4SF2
YOK-S4-41306A
An aluminum front steering hub carrier that further enhances the cornering performance of YZ-4SF2 on high grip road surfaces such as carpets or artificial grass. Comparing with standard caster angle (8 degrees), the caster angle of 6 degrees is specialized for high grip road surfaces....
CHF52.90
En stock  
+ −
Graphite battery holder for MR/RS Midship
YOK-B2-118MA
 
CHF29.90
En stock  
+ −
Alu Front Susp.Mount for BD7 (Rear side 43.5mm)
YOK-B7-3135FR
the new block has increased steering response as well as
CHF23.90
En stock  
+ −
3×6×2.0mm Alu Shim (8pcs·Black)
YOK-ZC-A3620BA
entspricht: ZC-A3620B
CHF5.90
En stock  
+ −
Flex Gear Differential Oil(35cc) DOT1
YOK-CS-DOT1
Oel-Vergleichstabelle #650 = DOT1 #800 = DOT2 #1000 = DOT3 #1200 = DOT4 #1600 = DOT5 #2100 = DOT6 #3000 = DOT7
CHF11.90
En stock  
+ −
Steel front lower suspension mount for YZ-2CAL 3.1
YOK-Z2-300FLSA
entspricht: Z2-300FLS
CHF29.50
En stock  
+ −
Front susp. arm(TypeB/2hole/F3.5pin) for YZ-4SF2
YOK-S4-008F2A
entspricht: S4-008F2
CHF12.50
En stock  
+ −
Karosserie 1:10 FWD Type-A
YOK-SP-FWDABA
A polycarbonate FWD touring car body Type-A that matches the 1/10 size FWD touring car category held around the world. The wide overfender creates strength, and the short overhang and front nose spoiler provide high exercise performance. In addition, it is equipped with a large rear wing to...
MaterialLexan AuswahlhilfeFWD 1:10 Massstab1:10 EinsatzOn-Road Lackierungunlackiert
CHF57.90
En stock  
+ −
Alu Main Shaft (Anodized) YZ-4
YOK-Z4-644H
 
CHF8.90
En stock  
+ −
Front“X30”shock shaft (Titanium coat)
YOK-S4-S2STA
entspricht: S4-S2ST
CHF15.90
En stock  
+ −
Racing performer Rotor M4 D12.2 x d7.25 titan
YOK-RP-095A
entspricht: RP-095
CHF57.50
En stock  
+ −
Racing Performer Rotor M4 D12.5 x 7.25 titan
YOK-RP-096A
entspricht: RP-096
CHF57.50
En stock  
+ −
Karosseriehalter magnetisch vorne
YOK-Y2-016MGFA
It is a magnet type body mount that can stealth mount the body. Attach the magnet to the body with bracket + Shoe Goo, etc., and attach the steel adapter on the body post. The adapter has a slightly sliding structure that does not interfere with chassis flex.
CHF24.90
En stock  
+ −
Verfügbarkeit
Verfügbar beim Lieferanten
Abmessungen
Auswahlhilfe
Material
Prix

CHF  –  CHF

  • ‎CHF1.5
  • ‎CHF949
Reifen/Rad-Typ
Servo-Typ
Verwendung
Massstab
Motor / Antrieb
Einsatz
Anspruch
Lackierung
Fertigungsgrad
Max. Geschwindigkeit
Marke
Betriebsspannung
Effacer