Deutsch (CH)
ERSATZTEIL-FINDER

Yokomo

Ordnen nach:
Empfohlen
Zeigen:
48
Front susp. arm(TypeB/2hole/F3.5pin) for YZ-4SF2
YOK-S4-008F2A
entspricht: S4-008F2
CHF 12.50
Auf Lager  
+ −
Multi Stand Team Yokomo
YOK-YT-MTS
Dieser Mehrfachständer nutzt den Platz im Pit effektiv und kann für die Lagerung von Maschinen, die Installation von Ladegeräten usw. verwendet werden. Dieser einfach zusammengebaute Ständer aus Harz kann beim Transport kompakt verstaut werden und wird schnell aufgebaut, wenn er im Pit...
CHF 39.90
Auf Lager  
+ −
Aluminium / Graphite Servo Halterung für RS2.0
YOK-RS-203AS
This servo mount is a hybrid structure that enhances the steering response of the RS2.0. The stay connecting it to the chassis is made of aluminum, and a lightweight graphite plate is used on the upper side of the chassis to prevent excessive changes in the center of gravity. The servo itself is...
CHF 39.90
Auf Lager  
+ −
Front“X30”shock shaft (Titanium coat)
YOK-S4-S2STA
entspricht: S4-S2ST
CHF 15.90
Auf Lager  
+ −
Offset Rear Universal Joint Set RD/SD/MD RD-415AR
YOK-RD-010ROS
This set lengthens the axle section of the universal shaft to further enhance the effect of increased traction created when driving. The axle's inner bearing is 1050, which is attached to the aluminum rear hub carrier with an adapter. (RD-415AR only)
CHF 39.90
Auf Lager  
+ −
Graphite battery holder for MR/RS Midship
YOK-B2-118MA
 
CHF 29.90
Auf Lager  
+ −
Aluminum Special Servo Mount
YOK-B7-203B
 
CHF 39.90
Auf Lager  
+ −
Alu Front Susp.Mount for BD7 (Rear side 43.5mm)
YOK-B7-3135FR
the new block has increased steering response as well as
CHF 23.90
Auf Lager  
+ −
Flex Gear Differential Oil(35cc) DOT1
YOK-CS-DOT1
Oel-Vergleichstabelle #650 = DOT1 #800 = DOT2 #1000 = DOT3 #1200 = DOT4 #1600 = DOT5 #2100 = DOT6 #3000 = DOT7
CHF 11.90
Auf Lager  
+ −
J Concept F2 Truck body for YZ-2T
YOK-Z2-101TA
entspricht: Z2-101T
AuswahlhilfeTruck Massstab1:10 EinsatzOff-Road Lackierungunlackiert HerstellerYokomo
CHF 57.50
Auf Lager  
+ −
Karosserie 1:10 FWD Type-A
YOK-SP-FWDABA
A polycarbonate FWD touring car body Type-A that matches the 1/10 size FWD touring car category held around the world. The wide overfender creates strength, and the short overhang and front nose spoiler provide high exercise performance. In addition, it is equipped with a large rear wing to...
AuswahlhilfeFWD 1:10 MaterialLexan Massstab1:10 EinsatzOn-Road Lackierungunlackiert
CHF 57.90
Auf Lager  
+ −
Alu Main Shaft (Anodized) YZ-4
YOK-Z4-644H
 
CHF 8.90
Auf Lager  
+ −
Clear lexan front wing (Wide/Narrow) for YZ-2
YOK-Z2-107FWA
entspricht: Z2-107FW
CHF 8.90
Auf Lager  
+ −
Racing performer Rotor M4 D12.2 x d7.25 titan
YOK-RP-095A
entspricht: RP-095
CHF 57.50
Auf Lager  
+ −
Racing Performer Rotor M4 D12.5 x 7.25 titan
YOK-RP-096A
entspricht: RP-096
CHF 57.50
Auf Lager  
+ −
Front & rear brake disk caliper set for YD-2 serie
YOK-Y2-415CPA
Yokomo will be releasing a new series of exterior parts for the YD-2, which will be a Brake discs and Calipers set.
CHF 42.90
Auf Lager  
+ −
Alu Transmission Case edge trimmed YD-4
YOK-Y4-302C
 
CHF 114.90
Auf Lager  
+ −
Alu Center Mount (Chamfer) YZ-4
YOK-Z4-304LC
 
CHF 22.90
Auf Lager  
+ −
Gear differential drive cup (Steel) for MR/RS
YOK-B2-501GSA
entspricht: B2-501GS
CHF 13.90
Auf Lager  
+ −
Aluminum Light Weight SP Steering Block RD/SD
YOK-Y2-415SAA
The 0 offset steering block adopted from SD2.0, which has been well-received for its neutral steering characteristics, is now made of aluminum to enhance steering response.
CHF 37.90
Auf Lager  
+ −
Plastic molded X shock cap
YOK-BM-S812RA
 
CHF 6.50
Auf Lager  
+ −
Alu lightweight SP Steering Block RD/SD Red
YOK-Y2-415SAR
This is a color version of the Offset 0 steering block for the RD/SD series, which has been well-received for its neutral characteristics, and now comes in three new colors: blue, purple, and red to match the machine color. Compared to the standard plastic blocks, the aluminum version is much...
CHF 37.90
Auf Lager  
+ −
Front & Rear Shock Tower/Spacer YZ-4
YOK-Z4-017
 
CHF 18.90
Auf Lager  
+ −
f4.8 Ball end cap BD9/BD10
YOK-B9-207A
(Hard)
CHF 15.50
Auf Lager  
+ −
Aluminum bulk head mount for YZ-2 series
YOK-Z2-018BMAA
entspricht: Z2-018BMA
CHF 56.50
Auf Lager  
+ −
Alu Chassis US Spec für BD12
YOK-B12-002AU
Aluminum main chassis for the BD12 competition touring car. It is a highly rigid US specification with little wall removal, making it ideal for high-grip carpeted surfaces. The center of gravity is lowered, which is also effective as a high-side countermeasure.
CHF 112.90
Auf Lager  
+ −
Aluminum rear brace support YD2
YOK-Y2-303ARA
entspricht: Y2-303AR
CHF 26.90
Auf Lager  
+ −
Alu Steering Bell Crank für 2WD Drift
YOK-D-163
 
CHF 55.90
Auf Lager  
+ −
Motor Mount für PCS
YOK-B8-302M2
 
CHF 55.90
Auf Lager  
+ −
Hex Socket Rod End Ball (M size / 12.8mm length)
YOK-ZC-206MHA
entspricht: ZC-206MH
CHF 6.90
Auf Lager  
+ −
YD-2/BD8 Brass Sus holder C (46.4~49.6mm)
YOK-TS-2151
Please be announced the new items made by brass for BD-8 and YD-2 series.
CHF 27.90
Auf Lager  
+ −
Center Balance Weight
YOK-B9-BW50A
50g
CHF 27.90
Auf Lager  
+ −
Steel front lower suspension mount for YZ-2CAL 3.1
YOK-Z2-300FLSA
entspricht: Z2-300FLS
CHF 29.50
Auf Lager  
+ −
Gear Differential Bevel Gear Set
YOK-BD-503G
 
CHF 15.90
Auf Lager  
+ −
Graphite molded L5/LD rear sus-Arm YZ-4SF2/YZ-2
YOK-S4-008R5GA
For YZ-4SF2/YZ-2CAL DTM3 and 3.1
CHF 15.90
Auf Lager  
+ −
Chassis Platte BD12 Carbon
YOK-B12-002
CHF 109.90
Auf Lager  
+ −
Rear Double Joint Universal Shaft
YOK-BD-010RW
 
CHF 54.90
Auf Lager  
+ −
Aluminum front shock tower for YD-2 EX
YOK-Y2-017AFEA
 
CHF 49.90
Auf Lager  
+ −
Rear toe control system for BD8-2018
YOK-B8-RTC18
CHF 54.90
Auf Lager  
+ −
LC Transmission Case for YZ-2 Series
YOK-Z2-302TLCA
Yokomo is excited to release our New LC (Laydown/Carpet) Transmission Case for Carpet, Astro, and hi-traction Dirt surfaces made specially for our YZ-2 series of vehicles.
CHF 12.90
Auf Lager  
+ −
MIP Puck Drive cup protector rebuild kit for YZ-2
YOK-Z2-17045
CHF 54.90
Auf Lager  
+ −
Aluminum Front Bulkhead Bridge SD3.0
YOK-SD-302S3
CHF 54.90
Auf Lager  
+ −
Front/Rear Body Mount YD-4
YOK-Y4-016A
entspricht: Y4-016
CHF 7.50
Auf Lager  
+ −
Alu Front Suspension Mount for BD7 (FR 42.7mm)
YOK-B7-3127FR
the new block has increased steering response as well as
CHF 21.90
Auf Lager  
+ −
Alu Front Suspension Mount (Rear/44.2mm)
YOK-B7-3142FR
This one piece designed aluminum suspension mount in 44.2mm for rear side at front suspension.
CHF 21.90
Auf Lager  
+ −
Aluminum lightweight front steering block for YD-2
YOK-Y2-415SALA
It is a lightweight steering block that is about 20% lighter than the conventional one by shaping up the aluminum steering block that has been released so far. The upper and lower kingpin positions connected to the A arm are offset, and the kingpin axis can be tilted inward once without a...
CHF 79.90
Auf Lager  
+ −
Racing Performer M4 BL Motor 17.5T für Touring
YOK-RPM-MS175A
Rotor F12.0×7.25×24.2
CHF 109.00
Auf Lager  
+ −
Graphite main chassis BD11
YOK-B11-002A
entspricht: B11-002
CHF 109.00
Auf Lager  
+ −
Verfügbarkeit
Verfügbar beim Lieferanten
Abmessungen
Auswahlhilfe
Material
Preis
CHF
–
CHF
  • CHF 1.5
  • CHF 849
Reifen/Rad-Typ
Servo-Typ
Verwendung
Massstab
Motor / Antrieb
Einsatz
Anspruch
Lackierung
Fertigungsgrad
Max. Geschwindigkeit
Marke
Betriebsspannung