ERSATZTEIL-FINDER

Véhicules RC

Vous trouverez ici une vaste sélection de modèles de véhicules RC. En tant que spécialistes de nos propres pistes de course de voitures RC, nous avons tout pour les débutants et les professionnels.

Trier par:
Recommandé
48
YOKOMO Factory T-Shirt 2XL size
YOK-ZC-T272XLA
entspricht: ZC-T272XL
CHF27.40
En stock  
+ −
YOKOMO Factory T-Shirt L size
YOK-ZC-T27LA
entspricht: ZC-T27L
CHF27.40
En stock  
+ −
YOKOMO Factory T-Shirt S size
YOK-ZC-T27SA
entspricht: ZC-T27S
CHF27.40
En stock  
+ −
YOKOMO Factory T-Shirt XL size
YOK-ZC-T27XLA
entspricht: ZC-T27XL
CHF27.40
En stock  
+ −
Rear Wheel for GT1
YOK-GT1-40R01
CHF6.80
En stock  
+ −
Brass Motor Slit Balance Weight 3.6g
YOK-MS-BWM
This is a brass weight that is attached to the groove on the opposite side of the motor slit, located on the MS1.0 main chassis to equalize the left and right rigidity. It weighs 3.6g and contributes to left-right balance adjustment.
CHF13.70
En stock  
+ −
Brass Rear Balanse Weight 5g for MS1.0
YOK-MS-BWR5
This brass weight can be installed on the front side of the rear bulk of the MS1.0. Its shape avoids interference with the rear belt and reduces the joint area with the chassis so that it does not affect the flex of the chassis.
CHF13.70
En stock  
+ −
Yokomo Shock Oil Stand for Multi Bag
YOK-YT-YSS
This stand storage item can hold bottles of shock oil, differential oil, etc. It can hold bottles up to 29mm in diameter, preventing oil leakage due to tipping over. It is also sized to be easily combined with the Yokomo Multi Bag and can be used as a special case for storing oil and chemicals...
CHF13.70
En stock  
+ −
Radial Rubber Tire Hard for GT1
YOK-GT1-39H
CHF12.80
En stock  
+ −
Radial Rubber Tire Medium for GT1
YOK-GT1-39M
CHF12.80
En stock  
+ −
Steel Gear Diff Drive Cup (Bearing type/1pcs.)
YOK-MS-501GS
CHF12.80
Rupture de stock
Steel Spool Drive Cup (Bearing type/1pcs.)
YOK-MS-501MCS
CHF12.80
Rupture de stock
f5.0 Preci.itan.King Pin Ball 10.3mm(4pcs.)
YOK-RP-117
High-precision titanium king pin balls for use on the upper and lower steering block of the MS1.0. The weight reduction improves machine response, and the ball height is 1mm higher than the kit's standard one, allowing the roll center to be changed for even better grip.
CHF13.70
Rupture de stock
Graphite Front Shock Tower (3mm) for RS1.0
YOK-RS-017SG
CHF13.70
En stock  
+ −
Alum. Rear Body Post Mount for MS1.0
YOK-MS-016MA
Aluminum rear body post mount for MS1.0. Converts the standard rearward post into a vertical one, directly receiving downforce and enabling mounting of bodies with long rear overhangs, scale bodies, etc
CHF15.40
En stock  
+ −
Alum.13 Shock Cap (2pcs.) for SO/MO2.0
YOK-S4-S813A
Aluminum shock cap with drain screw for easy assembly. Easy to quantify settings and absorb road impacts with increased operating efficiency.
CHF20.50
En stock  
+ −
Graphite Rear Shock Tower (3mm) for RS1.0
YOK-RS-018SG
CHF21.40
En stock  
+ −
Rear Universal Assy. (Bearing type/1pcs.)
YOK-MS-010R
CHF30.80
En stock  
+ −
Titanium Turnbuckle Set for MO2.0
YOK-MO-TBS20
Titanium turnbuckle set for 4WD off-road car MO2.0. 2 pieces each of 39mm, 45mm and 52mm are combined to reduce weight mainly on the upper part of the machine, which improves the performance and response of the car.
CHF32.50
Rupture de stock
Yokomo 05R Stock Motor
YOK-YM-05R
CHF34.20
En stock  
+ −
Titanium Turnbuckle Set for YZ-870C
YOK-YZ-TBS87
Titanium turnbuckle set for the vintage off-road car YZ-870C Super Dogfighter. Set includes 6 x 36mm for upper arms and tie rods, and 30mm for servo rods.
CHF34.20
En stock  
+ −
Front W/J Universal Assy. (Bearing type/1pcs.)
YOK-MS-010FW
CHF35.90
Rupture de stock
Alum.Steering Block Set (2pcs.) for MS1.0
YOK-MS-415AS
This aluminum steering block improves machine response and traction by replacing the plastic steering block.Graphite arm plates provide ample rigidity, and by replacing the plates up and down, various bump steer settings are possible. Each product comes in a pack of two, but the aluminum...
CHF61.60
Rupture de stock
D-MAX Diversion ADVAN ONE-VIA Body w/L.Decal
YOK-SD-DM13BB
CHF64.10
Rupture de stock
X TREME PS13 Silvia Body w/Light Decal
YOK-SD-PS13BB
CHF64.10
Rupture de stock
Team TOYO GP SPORTS 180SX Body w/Light Decal
YOK-SD-TY180BB
CHF64.10
Rupture de stock
Alum.St.Bellcrank set for RO1.0/SO1.0
YOK-Z2-201SBS
This is an aluminum bell crank set that gives the RO1.0/SO1.0 steering even sharper.
CHF71.80
En stock  
+ −
Rear Universal Set (Bearing type)
YOK-MS-010RS
Universal Design with bearings mounted on the dogbones to reduce sliding resistance with the joint axle to the upmost limit. This reduces drive loss and stabilizes suspension operation, thereby increasing cornering speed.
CHF77.00
En stock  
+ −
Front Double Joint Universal Set (Bearing type) MS1.0
YOK-MS-010FWS
Universal Design with bearings mounted on the dogbones to reduce sliding resistance with the joint axle to the upmost limit. This reduces drive loss and stabilizes suspension operation, thereby increasing cornering speed.
CHF83.80
Rupture de stock
Short Shock Set for MS1.0
YOK-MS-SSS
These short Aluminum Shocks are used in the MS1.0 standard. The Shock length is set to match the latest touring cars to lower the center of gravity as much as possible. The lower spring bearing is fitted with a bearing to release torsion of the coil spring during stroke and bring out neutral...
CHF94.10
En stock  
+ −
Alum. Short Shock Conversion Set for RS1.0
YOK-RS-SSC
New Short Shock Conversion Kit is now available to further improve the performance of the RookieSpeed RS1.0 to racing specs. This set of carbon shock towers and aluminum short shocks provide a sharp ride with minimal roll. The shock length has been shortened by more than 7mm to achieve an...
CHF94.10
En stock  
+ −
Alum.Shock set for RO1.0
YOK-Z2-S1SS
CHF109.00
En stock  
+ −
Titanium Screw Set for SO2.0
YOK-RP-115
This set allows the 104 screws used in the Super Off-Road SO2.0 to be made of titanium. All titanium screws are manufactured by high-precision cutting, so they are well finished when the machine is assembled, allowing for a solid machine build.
CHF129.90
En stock  
+ −
Titanium Screw Set for MO2.0
YOK-RP-116
This set allows the 142 screws used in the Master Off-Road MO2.0 to be made of titanium. All titanium screws are manufactured by high-precision cutting, so they are well finished when the machine is assembled, allowing for a solid machine build.
CHF144.40
En stock  
+ −
BL-RPX2 Competition ESC (Purple) for Drift
YOK-BL-RPX2DP
VerwendungRC Auto Motor / AntriebElektro Brushless-Motor HerstellerYokomo
CHF259.90
Rupture de stock
BL-RPX2 Competition ESC (Red) for Drift
YOK-BL-RPX2DR
VerwendungRC Auto Motor / AntriebElektro Brushless-Motor HerstellerYokomo
CHF259.90
Rupture de stock
Graphite Main Chassis für RD2.0 2.4mm
YOK-RD-002G
The graphite main chassis and upper deck that RD2.0 users have been waiting for are finally released! The plates are cut out of matte graphite for a competitive design that will completely change the look of your machine. The silhouette of the machine will be sharpened, and you will be able...
CHF94.90
Rupture de stock
Graphite Upper Deck for RD2.0 (2.2mm)
YOK-RD-003G
The graphite main chassis and upper deck that RD2.0 users have been waiting for are finally released! The plates are cut out of matte graphite for a competitive design that will completely change the look of your machine. The silhouette of the machine will be sharpened, and you will be able...
CHF32.90
Rupture de stock
CRC MetriCKs 1:12 Flachbahn Bausatz
CRC3000
The new CRC MetriCKs features side-to-side springs located in the front and a separate center spring in the back. This was part of our originally prototype. The new MetriCKs allows you to run side springs in the forward position where the roll spring force has NO effect on front-to-back...
CHF367.40
stock au fournisseur
Entrepôt externe. Livraison en Externes Lager. Lieferung in ca. 10 Werktagen. jours ouvrables environ.
+ −
Traxxas Rustler HD 1:10 2WD RTR pink m.USB-C Lad
TRAX37254-8PK
Der 2024er Rustler ist da! Jetzt mit extrem verstärkten HD-Aufhängungs- und Antriebsteilen sowie splintenloser Karosseriemontage. Erleben Sie erhöhte Haltbarkeit, Effizienz und puren Fahrspaß. Der Rustler beeindruckt mit mehr Power, einfacher Handhabung und Top Performance. Durch sein...
Massstab1:10 Motor / AntriebElektro Bürstenmotor EinsatzOff-Road AnspruchAnfänger/Einsteiger FertigungsgradRTR (ready to run)
CHF259.00
En stock  
+ −
Traxxas Rustler HD 1:10 2WD RTR rot m.USB-C Lader
TRAX37254-8R
Der 2024er Rustler ist da! Jetzt mit extrem verstärkten HD-Aufhängungs- und Antriebsteilen sowie splintenloser Karosseriemontage. Erleben Sie erhöhte Haltbarkeit, Effizienz und puren Fahrspaß. Der Rustler beeindruckt mit mehr Power, einfacher Handhabung und Top Performance. Durch sein...
Massstab1:10 Motor / AntriebElektro Bürstenmotor EinsatzOff-Road AnspruchAnfänger/Einsteiger FertigungsgradRTR (ready to run)
CHF259.00
En stock  
+ −
Boom Racing KUDU™ Stainless Steel Diamond Plate Se
BRX02373BK
Boom Racing KUDU™ Stainless Steel Diamond Plate Set for Series Land Rover® 88 (Rear Bed) Black
CHF34.90
En stock  
+ −
Boom Racing KUDU™ Stainless Steel Diamond Plate Se
BRX02372S
Boom Racing KUDU™ Stainless Steel Diamond Plate Set for Series Land Rover® 109 Rear Bed
CHF34.90
En stock  
+ −
Boom Racing KUDU™ Stainless Steel Diamond Plate Se
BRX02372BK
Boom Racing KUDU Stainless Steel Diamond Plate Set for Series Land Rover® 109 (Rear Bed) black
CHF34.90
En stock  
+ −
Boom Racing KUDU™ Stainless Steel Diamond Plate Se
BRX02371BK
Boom Racing KUDU™ Stainless Steel Diamond Plate Set for Series Land Rover® 88 & 109 (Cab Interior) Black
CHF18.90
En stock  
+ −
Boom Racing KUDU™ Stainless Steel Diamond Plate Se
BRX02369S
Boom Racing KUDU™ Stainless Steel Diamond Plate Set for Series Land Rover® 109 (Exterior) Silver for BRX02 109
CHF18.90
Rupture de stock
Boom Racing KUDU™ Stainless Steel Diamond Plate Se
BRX02369BK
Boom Racing KUDU™ Stainless Steel Diamond Plate Set for Series Land Rover® 109 (Exterior) Black for BRX02 109
CHF18.90
En stock  
+ −
VS4-10 Builders Kit - straight Axle
VPS09022
VS4-10 BUILDERS KIT - STRAIGHT AXLE Drivetrain The VS4-10 Builders Kit features the Vanquish Products VFD transmission and F10 straight Axles. The molded F10 Straight Axles utilize a high clearance design which minimizes the size of the pumpkin and maximizes strength around the C-hub and...
Massstab1:10 EinsatzCrawler/Scaler AnspruchAnfänger/Einsteiger FertigungsgradBausatz HerstellerVanquish Products
CHF339.90
En stock  
+ −
Catégories
Portofreie Lieferung

Online-Bestellungen portofrei ab CHF 80.-

Bestellung auf Rechnung

Einfach auf Rechnung bestellen.

Schnelle Abwicklung

Vor 16.00 Uhr bestellt, Versand per A-Post gleichentags