RC4WD Scale Crawler Cross Country Black Rock 1:10,

RC4WD-Z-RTR0046
CHF649.00
En stock
+
Retenir Comparer

RC4WD Scale Crawler Cross Country Black Rock 1:10, RTR

RC4WD Cross Country Scale Crawler mit Black Rock Four Door Body Set
Massstab: 1:10
45 Turn Brushed-Motor und wasserdichter Outcry III Brushed-Regler
Realistisches Leiterrahmenchassis aus Aluminium
R3 2-Gang Getriebe, Hammer Transfer Case und K44 Ultimate Achsen
1.55" Beadlock Stahl Felgen mit Compass M/T Reifen
Inklusive 3-Kanal RC-Anlage, 7.2 V 3000 mAh NiMH Stickpack Akku und Ladegerät


The Cross Country 1/10 Off-Road Truck is ready to take on any challenge! Whether you’re trailing through some rocky trails or pushing through some dense snow, the Cross Country is the perfect companion on the trail.

The Cross Country comes with a super scale & detailed 1/10 four door Black Rock hard body in an electrifying blue. Getting you through the trails are some 1.55” Stamped Steel Beadlock Wheels wrapped in some 1.55” Compass M/T Scale Tires.

Style is nothing without performance, and the Cross Country features a smooth R3 2 Speed Transmission, K44 Scale Cast Axles, 70mm Scale Shocks, and 4WD Drivetrain capable of helping you crawl through the roughest terrain out there.

Add your own flair, with a full range of options and parts, perfect for upgrading your Cross Country truck!

4 Door Black Rock Body in Blue & Black
Realistic Billet Aluminum Ladder Frame Chassis
R3 Scale 2 Speed Transmission
Center Mounted Realistic Hammer Transfer Case
K44 Ultimate Scale Cast Axles
Twister High Torque Metal Gear Digital Servo
RC4WD Ultimate Scale Shocks
Scale Coil Springs
Stamped Steel 1.55" Beadlock Wheels (Plain)
Compass M/T 1.55" Scale Tires
540 Crawler Brushed Motor 45T
Chassis Mounted Steering Servo
Outcry III Waterproof ESC
6-Cell 3000mAh NIMH Battery Pack
NIMH Peak Battery Charger
XR3 3-Channel 2.4Ghz Transmitter/Receiver Radio

Hammer Transfer Case
Ratio: 1.47:1
Gears: Wide .8 Mod Hardened Steel Gears
Features: 8 Bearings, Cast Casing, Hardened Gears

R3 Scale 2 Speed Transmission
Ratios: Pinion/Spur 14/64 = 4.57:1
Internal Ratios: 1.78:1
Gears - Wide Steel .8 Mod, Delrin Spur, Slipper Clutch

K44 Ultimate Scale Cast Axles
Ratio: 15/40 = 2.67:1
Hex to Hex Width: 177mm (6.96")

Cross Country Chassis
Realistic Chassis Designed after 1:1 Platform
Aluminum Chassis Rails for Stiffness and
Lightweight Nylon Reinforced Crossmembers
Low Profile Center Skid for Great Ground Clearance

Drive Shafts
RC4WD Plastic Punisher Shaft (102mm - 117mm / 4.02" - 4.61") 5mm Hole

Wheels
Name: OEM Stamped Steel 1.55" Beadlock Wheels (Plain)
Hub: 12mm Hex
Width: 21.7mm
OD: 47.4mm
Features: Stamped Steel, Aluminum Hubs, Internal Beadlock, Scale 5 Lug Design

Truck Dimensions
Wheelbase: 301mm (11.9")
Width: 212mm (8.4")
Height: 217mm (8.5")
Ground Clearance: 60mm (2.4")
Final Drive Ratio: 31.9:1
Weight: 6.87Lbs / 3.12Kg

DRIVETRAIN

The R3 2 Speed Transmission comes with a tough cast-metal case and wide gears to allow for more abuse along with a delrin spur with a slipper clutch.

The Cross Country includes the Hammer Transfer Case. Packed with scale detail, the case features a cast metal exterior and the heavy duty .8 Mod Widened Gears for durability.

Drawing on the success of the RC4WD MOA Gear Sets, the Cross Country RTR Drivetrain has the most durable gears RC4WD has to offer so that it can stay on the trail, day after day with no issues.

The most scale accurate axles on the market, the K44 Ultimate Scale Cast Axles feature high steer knuckles, lower mounting points and compact offset pumpkins.

The Punisher Shafts V2 for the Cross Country feature bulletproof steel universals and a high quality plastic shaft for great driveline angles and durability on the trail.

SUSPENSION AND CHASSIS

The Cross Country Chassis features a CNC billet aluminum servo mount. It also has a flat bottomed center skid plate to slide over obstacles easily.

The Cross Country RTR includes a set of RC4WD Ultimate Scale Shocks. Designed with scale looks and ultimate performance. The shocks are machined from billet aluminum.

The Cross Country Chassis features bent aluminum chassis rails for stiffness, and nylon reinforced crossmembers. The chassis and Black Rock body mount together with an innovative Body Mount System. Four posts clip into chassis mounted spring loaded brackets for a secure and clean setup.

The Cross Country includes a set of OEM Stamped Steel 1.55" Beadlock Wheels in a Plain finish wrapped around a tough set of RC4WD Compass M/T 1.55" Scale Tires in X2S3 Compound to deliver the traction you need.

The front suspension is a traditional 3-link with a panhard bar. The rear suspension is a double triangulated setup with multiple upper link mounting positions. The coil springs are separate from the shocks to complete the scale appearance

DETAILS

The Black Rock Body Set is molded in an electric blue color and features a full interior. The body is molded from impact resistant ABS plastic.

The body features a fully detailed interior, seats, and a detailed dashboard. It's all here to bring your scale experience to a new level. Use the included decal sheet to give it your own personal touch.

From the scale headlights to the front grill that comes as a faux mesh cover made from molded metal alloy, this truck delivers a super scale appearance.

The Black Rock Body Set comes with an awe- some assortment of scale details including opening hood and rubber hood latches, side mirrors, spare tire mount, and a removable top.

From the fenders to the side view mirrors, this truck was crafted with incredible detail, and looks great from any angle!

ELECTRONICS

The Cross Country includes a high quality XR3 3 Channel 2.4Ghz Radio System. Use the third channel to shift between first and second gear for precise control over obstacles.

The Cross Country is powered by the RC4WD 45 Turn Crawler Motor. With its sealed endbell for increased durability and long lasting perfor- mance, you're sure to get where you're going!

The Cross Country Truck features the popular RC4WD Outcry III Waterproof ESC Brushed Speed Controller with built-in drag brake for reliable, constant power on demand. Anytime.

A great truck needs a great servo to get you out of those tough spots and the Cross Country features the Twister High Torque Metal Gear Digital Servo. It boasts over 300oz/in of torque at 7.2V.

Its ALL in the box! Everything you need is provided to get you on the trails today!

What's Included:

  • 1x RC4WD Cross Country Off-Road RTR W/ 1/10 Black Rock Four Door Body Set

Instruction Manuals:

Notes:

  • While some components may come assembled, we always recommend that you check the products to ensure all hardware is tight. In some cases, you may want to apply thread lock to some of the hardware that is already installed.
  • Use good quality hex drivers to avoid stripping screw heads.
  • Use thread lock when putting metal screws into metal parts.
  • Steps marked with an asterisk (*) require thread lock.
  • Use thread lock sparingly.
  • Axles may require shimming.
  • Do not over tighten screws, otherwise you may strip the thread.


General
Massstab:
1:10
Motor / Antrieb:
  • Elektro Bürstenmotor
Einsatz:
  • Crawler/Scaler
Anspruch:
  • Anfänger/Einsteiger
Fertigungsgrad:
RTR (ready to run)
Max. Geschwindigkeit:
10-20 km/h
Hersteller:
RC4WD
Possibly you may be interested
Portofreie Lieferung

Online-Bestellungen portofrei ab CHF 50.-

Bestellung auf Rechnung

Bestellen Sie auf Rechnung

Schnelle Abwicklung

Vor 16.00 Uhr bestellt, Versand per A-Post gleichentags