Deutsch (CH)
ERSATZTEIL-FINDER

Yokomo

Empfohlen
12 Pro Seite
Progressive Federn BD11 2.10 bis 2.40 20mm
YOK-B10-SSP21
CHF 12.90
Auf Lager  
+ −
SCR-BL Fahrtenregler für brushed Motoren
YOK-SCR-BL
AKTION SOLANGE VORRAT This is a speed controller dedicated to brush motors, which is very popular among beginners and intermediate players. This model was also used in Yokomo's pre-assembled competition off-road car, and it is equipped with a large heat sink, making it a tough performance...
CHF 35.00
Auf Lager  
+ −
Yokomo Factory Jacke XL
YOK-ZC-J27XLA
A windproof jacket with the Yokomo Racing Factory logo on the chest and back. Light nylon fabric, perfect for changing seasons. It has a slightly larger size.
CHF 37.90
Nicht auf Lager
Yokomo Factory Jacke L
YOK-ZC-J27LA
entspricht: ZC-J27L
CHF 37.90
Auf Lager  
+ −
Rear hub carrier link mount für S4-415RS
YOK-S4-415RLA
entspricht: S4-415RL
CHF 14.90
Auf Lager  
+ −
High traction rear hub carrier weight
YOK-Y2-415RWA
A steel weight that can be attached directly to the rear hub carrier of the YD-2 series to increase rear traction. It is possible to effectively increase the rear grip by increasing the unsprung weight that directly applies the load to the tire without passing through a damper. The weight is...
CHF 32.90
Auf Lager  
+ −
Rear short shock shaft for YZ-2DTM3/CAL3
YOK-S4-S2MA
entspricht: S4-S2M
CHF 9.50
Auf Lager  
+ −
Inline Battery holder conversion für MD1.0
YOK-MD-CONV
This is a battery holder conversion to change the battery mounting of MD1.0 to inline mounting. When the car has a certain degree of grip, mounting the battery inline (in the front-back direction of the chassis) suppresses chassis roll, enabling sharper movement when transitioning to an...
CHF 43.90
Auf Lager  
+ −
4 gear transmission conversion MD1.0
YOK-MD-CON4
The standard MD1.0 transmission has 3 gears and positive torque, but by adding a counter gear and reconfiguring it, this conversion set can be used with 4 gears and anti-torque specifications. Compared to a 3-gear transmission, the additional gear increases drive loss, but the...
CHF 37.90
Auf Lager  
+ −
YZ-2CAL3.1/DTM3.1 Side plate (graphite molding)
YOK-Z2-002SG
Side plate for YZ-2CAL3.1/DTM3.1. Graphite-mixed resin is used to increase rigidity and improve steering response, especially on high-grip surfaces. In particular, pitching rigidity is increased, enabling the driver to gain a sense of stability from corner entry to clipping
CHF 14.90
Auf Lager  
+ −
Rear Upper Mount/Roll Bar Holder/Gear Box
YOK-Z2-300RG
This is a set of resin parts around the rear for YZ-2CAL3.1/DTM3.1/Rear Upper Mount, Roll Bar Holder, and Gear Box Support. Graphite-mixed resin is used to increase rigidity, which is effective in gaining rear stability when turning and improving traction when accelerating.
CHF 14.50
Auf Lager  
+ −
Rear Belt Tensioner BD11
YOK-B11-RBTS
Rear belt tensioner set for BD11. It is an effective part especially when a high-power motor is installed, and it is possible to suppress tooth jumping of the rear belt, improve drive efficiency, and make the belt itself last longer. European team drivers who participate in the ETS always wear...
CHF 16.90
Auf Lager  
+ −
Verfügbarkeit
Verfügbar beim Lieferanten
Abmessungen
Auswahlhilfe
Material
Preis
CHF
–
CHF
  • CHF 1.5
  • CHF 849
Reifen/Rad-Typ
Servo-Typ
Verwendung
Massstab
Motor / Antrieb
Einsatz
Anspruch
Lackierung
Fertigungsgrad
Max. Geschwindigkeit
Marke
Betriebsspannung